gitorious.org Git - xdandroid:rootfs.git/blob

1 #!/bin/sh

2 fail() {

3 /bin/echo "Failed"

4 /bin/echo "$1"

5 exec /bin/sh

6 }

8 /bin/mount -o remount,rw / /

10 PATH=/sbin:/system/sbin:/system/bin:/bin:/system/xbin:/system/xbin/bb:/data/local/bin

12 /bin/echo "Rootfs loaded."

14 /bin/mount -t proc proc /proc

15 /bin/mount -t sysfs sys /sys

17 /bin/mount | grep mtd

18 notnand=$?

20 if [ $notnand = "0" ] ; then

21 echo "running from NAND"

22 /bin/mount -t yaffs2 /dev/block/mtdblock2 /system

23 /bin/mount -t yaffs2 /dev/block/mtdblock3 /data

24 fi

27 partition=mmcblk0p1

29 # Try unpartitioned card

30 if [ ! -d /sys/block/mmcblk0/$partition ] ; then

31 partition=mmcblk0

32 fi

34 if [ -f /sys/class/vogue_hw/gsmphone ] ; then

35 echo "GSM phone found"

36 fi

38 #mkdir -m 0777 /sdcard

39 #fsck already done in initrd

40 mount -t vfat -o fmask=0000,dmask=0000,rw,flush,noatime,nodiratime /dev/block/$partition /sdcard

41 [ $? -eq 0 ] || fail "Failed to mount the SD card. Cannot continue."

43 if [ ! -d /sdcard/cache ] ; then

44 mkdir /sdcard/cache

45 fi

47 #mkdir -m 0777 /cache

48 mount /sdcard/cache /cache

50 if [ -d /sdcard/android ] ; then

51 card=/sdcard/android

52 else

53 card=/sdcard

54 fi

57 if [ $notnand = "1" ] ; then

59 if [ -f $card/data.gz ] ; then

60 echo "Please wait... extracting Data Image"

61 if [ -f $card/data.img ] ; then

62 rm $card/data.img

63 fi

64 gzip -df $card/data.gz

65 [ $? -eq 0 ] || fail "Failed to extract Data Image"

66 mv $card/data $card/data.img

67 echo "done"

68 fi

70 PARTITIONED=0

71 echo "Checking for partition..."

72 if [ -d /sys/block/mmcblk0/mmcblk0p2 ] ; then

73 PARTITIONED=1

74 if [ -d /sys/block/mmcblk0/mmcblk0p3 ] ; then

75 PARTITIONED=2

76 fi

77 fi

79 if [ -f $card/backupsystem/installedsystem.sqsh -o -f $card/backupsystem/installedsystem.img -o -f $card/backupsystem.ext2 ]; then

80 echo "Partitioned Build Detected"

81 else

82 PARTITIONED=0

83 fi

85 if [ $PARTITIONED -lt 2 ] ; then

87 if [ ! -f $card/data.img ] ; then

88 echo "Creating a new Data store"

89 dd if=/dev/zero of=$card/data.img bs=1048576 count=256

90 [ $? -eq 0 ] || fail "Failed to allocate the storage"

91 mke2fs -F $card/data.img

92 [ $? -eq 0 ] || fail "Failed to format the storage"

93 fi

94 fi

96 if [ $PARTITIONED -lt 2 ] ; then

97 losetup /dev/block/loop0 $card/data.img

98 [ $? -eq 0 ] || fail "Failed to find data.img on SD Card"

99 e2fsck -y /dev/block/loop0

100 mount -t ext2 -o noatime,nodiratime,sync /dev/block/loop0 /data

101 else

102 e2fsck -y /dev/block/mmcblk0p3

103 mount -t ext2 -o noatime,nodiratime /dev/block/mmcblk0p3 /data

104 fi

105 [ $? -eq 0 ] || fail "Failed to mount /data"

106

107 if [ $PARTITIONED -eq 0 ] ; then

108 if [ -f $card/system.ext2 ] ; then

109 echo "Using uncompressed system"

110 losetup /dev/block/loop1 $card/system.ext2

111 [ $? -eq 0 ] || fail "Failed to reach system.ext2 on SD Card"

112 e2fsck -y /dev/block/loop1

113 mount -t ext2 -o noatime,nodiratime /dev/block/loop1 /system

114 [ $? -eq 0 ] || fail "Failed to mount /system"

115 elif

116 [ -f $card/system.sqsh ] ; then

117 echo "Using SquashFS system"

118 losetup /dev/block/loop1 $card/system.sqsh

119 [ $? -eq 0 ] || fail "Failed to find system.sqsh on SD Card"

120 mount -t squashfs -o ro,noatime,nodiratime /dev/block/loop1 /system

121 [ $? -eq 0 ] || fail "Failed to mount /system"

122 else

123 losetup /dev/block/loop1 $card/system.img

124 [ $? -eq 0 ] || fail "Failed to find system.img on SD Card"

125 mount -t cramfs -o ro,noatime,nodiratime /dev/block/loop1 /system

126 [ $? -eq 0 ] || fail "Failed to mount /system"

127 fi

128 else

129 echo "Using partitioned system"

130 e2fsck -y /dev/block/mmcblk0p2

131 mount -t ext2 -o ro,noatime,nodiratime /dev/block/mmcblk0p2 /system

132 [ $? -eq 0 ] || fail "Failed to mount /system"

133 fi

134 fi

135

136 if [ -d $card/AndroidApps ] ; then

137 echo Copying Applications

138 if [ ! -d /data/app ] ; then

139 mkdir -m 0771 /data/app

140 fi

141 /bin/cp $card/AndroidApps/* /data/app

142 chown -R 1000:1000 /data/app

143 fi

144

145 if [ ! -d $card/media ] ; then

146 echo You have no media folder, please extract the resources to your SD card android folder

147 fi

148

149 SQLITE3="/bin/sqlite3"

150 DB="/data/data/com.android.providers.telephony/databases/telephony.db"

151 if [ -f $DB ] ; then

152 if [ "`$SQLITE3 $DB 'SELECT numeric FROM carriers;' | grep 310995`" != "310995" ] ; then

153 echo Creating android apn

154 "$SQLITE3" "$DB" "INSERT INTO carriers VALUES(NULL, 'Android' , '310995' , '310' , '995' , 'internet' , '*' , '*' , '*' , NULL, NULL, NULL, NULL, 'null' , -1, 'default' , 1);"

155

156 fi

157 else

158 echo No telephony database. You must have a new data file. I will check for the android apn on the next reboot

159 fi

160

161 /bin/rm -rf /data/etc

162 /bin/mkdir -m 0755 /data/etc

163 mount /data/etc /etc

164 cp -a /system/etc/* /etc

165 cp -ar /init.etc/* /etc/

166

167 LCDDENSITY=`/bin/grep -o "lcd.density=.*" /proc/cmdline | /bin/sed -e "s/.*lcd.density=//g" -e "s/ .*//g"`

168

169 if [ "$LCDDENSITY" != "" ] ; then

170 echo "ro.sf.lcd_density=$LCDDENSITY" >> /etc/default.prop

171 echo Setting ro.sf.lcd_density=$LCDDENSITY

172 fi

173

174 if [ ! -d /data/shared_prefs ] ; then

175 mkdir -m 0770 /data/shared_prefs

176 fi

177 chmod 0770 /data/shared_prefs

178 chown 1000:1000 /data/shared_prefs

179 mount /data/shared_prefs /shared_prefs

180

181 mount /sdcard/cache /tmp

182

183 cp /system/build.prop /tmp/build.prop

184 KAISER=0

185 DIAMOND=0

186 WIFI_TI=0

187 WIFI_BCM=0

188 ### Is this a Kaiser?

189 if [ "`cat /proc/cpuinfo|grep -o Kaiser`" = "Kaiser" ]; then

190 echo "KAISER detected"

191 KAISER=1

192 WIFI_TI=1

193 elif [ "`cat /proc/cpuinfo|grep -o Polaris`" = "Polaris" ]; then

194 echo "POLARIS detected"

195 KAISER=1

196 WIFI_TI=1

197 elif [ "`cat /proc/cpuinfo|grep -o Diamond`" = "Diamond" ]; then

198 echo "DIAMOND detected"

199 DIAMOND=1

200 WIFI_TI=1

201 elif [ "`cat /proc/cpuinfo|grep -o Raphael`" = "Raphael" ]; then

202 echo "RAPHAEL detected"

203 DIAMOND=1

204 WIFI_TI=1

205 elif [ "`cat /proc/cpuinfo|grep -o blackstone`" = "blackstone" ]; then

206 echo "BLACKSTONE detected"

207 DIAMOND=1

208 WIFI_TI=1

209 elif [ "`cat /proc/cpuinfo|grep -o Topaz`" = "Topaz" ]; then

210 echo "TOPAZ detected"

211 DIAMOND=1

212 WIFI_TI=1

213 elif [ "`cat /proc/cpuinfo|grep -o Rhodium`" = "Rhodium" ]; then

214 echo "RHODIUM detected"

215 DIAMOND=1

216 WIFI_BCM=1

217 else

218 echo "VOGUE detected"

219 sed -i s/^wifi/#wifi/ /tmp/build.prop

220 fi

221

222 mount --bind /tmp/build.prop /system/build.prop

223

224 ### Fix su on some builds...

225 mount --bind /bin/su /system/bin/su 2> /dev/null

226 mount --bind /bin/su /system/xbin/su 2> /dev/null

227

228 RCSCRIPT=""

229 RCCONFIG=""

230

231 echo "Checking for build type..."

232 if [ -f /system/hero.build ] ; then

233 echo "Hero build detected"

234 RCSCRIPT="hero"

235 RCCONFIG="hero"

236 ln /data/app_s /system/app

237

238 elif [ -f /system/eclairhero.build ] ; then

239 echo "HERO 2.1 BUILD DETECTED -- ECLAIR"

240 RCSCRIPT="eclairhero"

241 RCCONFIG="eclairhero"

242

243 elif [ -f /system/eclair.build ] ; then

244 echo "Eclair build detected"

245 RCSCRIPT="eclair"

246 RCCONFIG="eclair"

247

248 elif [ -f /system/tattoo.build ] ; then

249 echo "Tattoo build detected"

250 RCSCRIPT="tattoo"

251 RCCONFIG="tattoo"

252

253 elif [ -f /system/donut.build ] ; then

254 echo "Donut build detected"

255 RCSCRIPT="donut"

256 RCCONFIG="donut"

257

258 elif [ -d /system/lib/donut ] ; then

259 echo "Donut build detected"

260 RCSCRIPT="donut"

261 RCCONFIG="donut"

262

263 elif [ -f /system/xrom.build ] ; then

264 echo "xROM build detected"

265 RCSCRIPT="xrom"

266 RCCONFIG="xrom"

267

268 elif [ -f /system/rogers.build ] ; then

269 echo "Rogers build detected"

270 RCSCRIPT="rogers"

271 RCCONFIG="rogers"

272

273 elif [ -f /system/cyanogen.build ] ; then

274 echo "cyanogen experimental detected.....eating donuts"

275 RCSCRIPT="cyanogen"

276 RCCONFIG="cyanogen"

277

278 elif [ -f /system/custom.build ] ; then

279 echo "Custom init.rc detected"

280 cp /system/sysinit.rc /build.cfg/init.sysinit.rc

281 RCCONFIG="hero"

282 RCSCRIPT="sysinit"

283

284 else

285 echo "Unknown Android build. Assuming Ion variant"

286 RCSCRIPT="ion"

287 RCCONFIG="ion"

288

289 # for the fake sensors library

290 mount /lib/hw /system/lib/hw -o loop

291 chmod 666 /dev/input/event0

292

293 if [ $DIAMOND -eq 1 ] ; then

294 RCCONFIG="ion.diamond"

295 fi

296 fi

297

298 if [ $KAISER -eq 1 ] ; then

299 RCSCRIPT="$RCSCRIPT.kaiser"

300 fi

301

302 echo "using /init.$RCSCRIPT.rc as init.rc"

303 echo "using $card/conf/$RCCONFIG.user.conf"

304

305 cp "/init.cfg/init.$RCSCRIPT.rc" /etc/init.rc

306

307 #Assume this rootfs.img will be used only on "good" devices

308 #Meaning raph/diam/blac/

309

310 # echo /dev/block/mmcblk0p2 > /sys/devices/platform/usb_mass_storage/lun0/file

311 ifconfig usb0 192.168.20.1 up

312 busybox telnetd -b 192.168.20.1 -l /bin/sh

313 #chmod 4755 /bin/su

314 #mkdir -m 0777 /smodem

315 if [ -d /data/dropbear/ ] ; then

316 echo "Starting SSH"

317 mknod /dev/random c 1 8

318 mknod /dev/urandom c 1 9

319 /bin/dropbear -r /data/dropbear/dropbear_rsa_host_key -s

320 fi

321

322 if [ "$WIFI_TI" = "1" ] || [ "$WIFI_BCM" = "1" ];then

323 if [ -e "$card/modules-$(uname -r).tar.gz" ] ;then

324 echo "Installing $card/modules-$(uname -r).tar.gz"

325 if [ ! -d "/data/modules" ] ; then

326 mkdir /data/modules

327 fi

328 mount --bind /data/modules /lib/modules

329 tar xzf $card/modules-$(uname -r).tar.gz -C /lib/modules

330 cd /lib/modules

331 cp wlan.ko /etc/wifi

332 cp bcm4329.ko /etc/wifi

333 fi

334 mount --bind /etc/wifi /system/lib/modules

335

336 sed -i s/^#wifi/wifi/ /tmp/build.prop

337 fi

338

339 if [ "$WIFI_TI" = "1" ];then

340 if [ "`grep -c ^wifi /tmp/build.prop`" != "2" ]; then

341 echo "wifi.interface = tiwlan0" >> /tmp/build.prop

342 echo "wifi.supplicant_scan_interval = 45" >> /tmp/build.prop

343 fi

344 fi

345

346 if [ "$WIFI_BCM" = "1" ];then

347 if [ "`grep -c ^wifi /tmp/build.prop`" != "2" ]; then

348 echo "wifi.interface = eth0" >> /tmp/build.prop

349 echo "wifi.supplicant_scan_interval = 45" >> /tmp/build.prop

350 fi

351

352 # fyi: firmware is loaded from /etc/wifi/bcm432x/bcm4325-rtecdc.bin, nvram from /data/wifi-nvram.txt

353

354 mount --bind /etc/wifi/bcm432x/dhcpcd.conf /system/etc/dhcpcd/dhcpcd.conf

355 mount --bind /etc/wifi/bcm432x/wpa_supplicant.conf /system/etc/wifi/wpa_supplicant.conf

356 mount --bind /etc/wifi/bcm432x/bcm4325-libhardware_legacy.so /system/lib/libhardware_legacy.so

357

358 # init.rc: fix wpa_supplicant service

359 sed -i s/-itiwlan0/-ieth0/ /etc/init.rc

360 sed -i s/-Dtiwlan0/-Dwext/ /etc/init.rc

361

362 # init.rc: fix dhcpcd service, wifi.interface, and wpa_supplicant service socket

363 sed -i s/tiwlan0/eth0/ /etc/init.rc

364

365 # init.rc:

366 sed -i s/user\ wifi/#user\ wifi/ /etc/init.rc

367 sed -i s/group\ wifi/#group\ wifi/ /etc/init.rc

368

369 # extract nvram (todo: clean this up/integrate with TI calibration)

370 if [ ! -e /data/wifi-nvram.txt ]; then

371 insmod /lib/modules/mtdchar.ko

372 mknod /dev/mtd0ro c 90 1

373 mkdir /lib/modules/$(uname -r)

374

375 SKIP=5744

376

377 dd if=/dev/mtd0ro of=/tmp/tempcal bs=8192 count=1 skip=$SKIP

378 rm /dev/mtd0ro

379 rmmod mtdchar

380 rmdir /lib/modules/$(uname -r)

381 dd if=/tmp/tempcal of=/data/wifi-nvram.txt bs=1 count=466

382 rm /tmp/tempcal

383 fi

384 fi

385

386

387 if [ -f "$card/conf/$RCCONFIG.user.conf" ]; then

388 /bin/userinit.sh -c "$card/conf/$RCCONFIG.user.conf"

389 else

390 echo "No user config files ($RCCONFIG) found on sdcard"

391 fi

392

393 mount -tdebugfs none /dbgfs

394 #Activate baclight control

395 echo 3 > /sys/class/htc_hw/test

396 #Smooth scroll

397 echo 40 >/sys/devices/system/cpu/cpu0/cpufreq/ondemand/up_threshold

398 #Activate full charging

399 echo 2 > /dbgfs/htc_battery/charger_state

400

401 echo 1024 > /dbgfs/micropklt_dbg/sleep_leds

402

403 if /bin/grep -c 'physkeyboard=fuze' /proc/cmdline >/dev/null ; then

404 echo "USING RAPH110|FUZE LAYOUT"

405 cp -f /init.etc/keymaps/fuze_microp-keypad.kcm.bin /etc/keymaps/microp-keypad.kcm.bin

406 cp -f /init.etc/keymaps/fuze_microp-keypad.kl /etc/keymaps/microp-keypad.kl

407 cp -f /init.etc/keymaps/fuze_raph_navi_pad.kl /etc/keymaps/raph_navi_pad.kl

408 elif /bin/grep -c 'physkeyboard=raph' /proc/cmdline >/dev/null ; then

409 echo "USING NEW RAPH LAYOUT"

410 cp -f /init.etc/keymaps/raphfix_microp-keypad.kcm.bin /etc/keymaps/microp-keypad.kcm.bin

411 elif /bin/grep -c 'physkeyboard=tilt2' /proc/cmdline >/dev/null ; then

412 echo "USING EXPERIMENTAL TILT2 LAYOUT"

413 cp -f /init.etc/keymaps/tilt2_microp-keypad.kl /etc/keymaps/microp-keypad.kl

414 cp -f /init.etc/keymaps/tilt2_microp-keypad.kcm.bin /etc/keymaps/microp-keypad.kcm.bin

415 cp -f /init.etc/keymaps/tilt2_navi_pad.kl /etc/keymaps/raph_navi_pad.kl

416 elif /bin/grep -c 'physkeyboard=rhod210' /proc/cmdline >/dev/null ; then

417 echo "USING EXPERIMENTAL RHOD210 LAYOUT"

418 cp -f /init.etc/keymaps/rhod210_microp-keypad.kl /etc/keymaps/microp-keypad.kl

419 cp -f /init.etc/keymaps/rhod210_microp-keypad.kcm.bin /etc/keymaps/microp-keypad.kcm.bin

420 cp -f /init.etc/keymaps/rhod210_navi_pad.kl /etc/keymaps/raph_navi_pad.kl

421 else

422 echo "USING OLD KEYMAP"

423 cp -f /init.etc/keymaps/oldqwerty_microp-keypad.kcm.bin /etc/keymaps/microp-keypad.kcm.bin

424 cp -f /init.etc/keymaps/oldqwerty_microp-keypad.kl /etc/keymaps/microp-keypad.kl

425 cp -f /init.etc/keymaps/oldqwerty_raph_navi_pad.kl /etc/keymaps/raph_navi_pad.kl

426 fi

427

428 for i in /sys/class/input/input* ; do

429 if [ "`cat $i/name`" = "tssc-manager" ] ; then

430 touchscreendir=$i

431 echo "Touchscreen device directory is $i"

432 fi

433 done

434

435 if [ -f $card/ts-calibration ] ; then

436 echo "Using Saved Touchscreen Calibration"

437 echo 128,128,1903,128,128,1907,1903,1907,1024,1024 > $touchscreendir/calibration_screen

438 cat $card/ts-calibration > $touchscreendir/calibration_points

439 else

440 mkdir /dev/graphics

441 mknod /dev/graphics/fb0 c 29 0

442 clear

443 echo; echo; echo; echo; echo; echo; echo; echo "Calibrating Touchscreen:"

444 echo "Click the Five Targets in order -- Top Left, Top Right, Middle, Bottom Left, Bottom Right"

445 echo "(Tap lightly. The screen is quite sensitive.)"

446 tssc-calibrate

447 echo 0,0,0,0,0,0,0,0,0,0 | cmp -s $touchscreendir/calibration_points # determine if calibration is still null -- means failed calibration

448 if [ $? -eq 0 ] ; then

449 echo "Touchscreen Calibration Failed"

450 else

451 echo "Touchscreen Calibration Successful; Saving..."

452 cat $touchscreendir/calibration_points > $card/ts-calibration

453 fi

454 fi

455

456 mkdir /dev/msm_camera

457 mknod /dev/msm_camera/control0 c 250 0

458 mknod /dev/msm_camera/config0 c 250 1

459 mknod /dev/msm_camera/frame0 c 250 2

460

461 exec /init.android