gitorious.org Git - xdandroid:rootfs.git/blob

1 #!/bin/sh

2 fail() {

3 /bin/echo "Failed"

4 /bin/echo "$1"

5 exec /bin/sh

6 }

7

8 /bin/mount -o remount,rw / /

9

10 PATH=/sbin:/system/sbin:/bin:/system/bin:/system/xbin:/system/xbin/bb:/data/local/bin

11

12 /bin/echo "Rootfs loaded."

13

14 /bin/mount -t proc proc /proc

15 /bin/mount -t sysfs sys /sys

16

17 /bin/mount | grep mtd

18 notnand=$?

19

20 if [ $notnand = "0" ] ; then

21 echo "running from NAND"

22 /bin/mount -t yaffs2 /dev/block/mtdblock2 /system

23 /bin/mount -t yaffs2 /dev/block/mtdblock3 /data

24 fi

25

26

27 partition=mmcblk0p1

28

29 # Try unpartitioned card

30 if [ ! -d /sys/block/mmcblk0/$partition ] ; then

31 partition=mmcblk0

32 fi

33

34 if [ -f /sys/class/vogue_hw/gsmphone ] ; then

35 echo "GSM phone found"

36 fi

37

38 #mkdir -m 0777 /sdcard

39 #fsck already done in initrd

40 mount -t vfat -o fmask=0000,dmask=0000,rw,flush,relatime,utf8 /dev/block/$partition /sdcard

41 [ $? -eq 0 ] || fail "Failed to mount the SD card. Cannot continue."

42

43 if [ ! -d /sdcard/cache ] ; then

44 mkdir /sdcard/cache

45 fi

46

47 #mkdir -m 0777 /cache

48 mount /sdcard/cache /cache

49

50 CARD_PATH=`/bin/grep -o "rel_path=.*" /proc/cmdline | /bin/sed -e "s/.*rel_path=//g" -e "s/ .*//g"`

51 if [ "$CARD_PATH" = "" ];then

52 CARD_PATH="andboot"

53 fi;

54 if [ -d /sdcard/$CARD_PATH ] ; then

55 card=/sdcard/$CARD_PATH

56 else

57 card=/sdcard

58 fi

59

60

61 if [ $notnand = "1" ] ; then

62

63 if [ -f $card/data.gz ] ; then

64 echo "Please wait... extracting Data Image"

65 if [ -f $card/data.img ] ; then

66 rm $card/data.img

67 fi

68 gzip -df $card/data.gz

69 [ $? -eq 0 ] || fail "Failed to extract Data Image"

70 mv $card/data $card/data.img

71 echo "done"

72 fi

73

74 if [ -d /sys/block/mmcblk0/mmcblk0p4 ] && /bin/grep -q -v no_partitions /proc/cmdline ; then

75 echo "Using partitioned system"

76 /bin/e2fsck -y /dev/block/mmcblk0p3

77 mount -t ext2 -o ro,relatime /dev/block/mmcblk0p3 /system

78 /bin/e2fsck -y /dev/block/mmcblk0p4

79 mount -t ext2 -o relatime /dev/block/mmcblk0p4 /data

80 else

81 echo "Using loopback filesystems"

82 if [ ! -f $card/data.img ] ; then

83 echo "Creating a new Data store"

84 dd if=/dev/zero of=$card/data.img bs=1048576 count=256

85 [ $? -eq 0 ] || fail "Failed to allocate the storage"

86 mke2fs -F $card/data.img

87 [ $? -eq 0 ] || fail "Failed to format the storage"

88 fi

89

90 losetup /dev/block/loop0 $card/data.img

91 [ $? -eq 0 ] || fail "Failed to find data.img on SD Card"

92 e2fsck -y /dev/block/loop0

93 mount -t ext2 -o relatime /dev/block/loop0 /data

94

95 if [ -f $card/system.ext2 ] ; then

96 echo "Using uncompressed system"

97 losetup /dev/block/loop1 $card/system.ext2

98 [ $? -eq 0 ] || fail "Failed to reach system.ext2 on SD Card"

99 e2fsck -y /dev/block/loop1

100 mount -t ext2 -o relatime /dev/block/loop1 /system

101 [ $? -eq 0 ] || fail "Failed to mount /system"

102 elif

103 [ -f $card/system.sqsh ] ; then

104 echo "Using SquashFS system"

105 losetup /dev/block/loop1 $card/system.sqsh

106 [ $? -eq 0 ] || fail "Failed to find system.sqsh on SD Card"

107 mount -t squashfs -o ro,relatime /dev/block/loop1 /system

108 [ $? -eq 0 ] || fail "Failed to mount /system"

109 else

110 losetup /dev/block/loop1 $card/system.img

111 [ $? -eq 0 ] || fail "Failed to find system.img on SD Card"

112 mount -t cramfs -o ro,relatime /dev/block/loop1 /system

113 [ $? -eq 0 ] || fail "Failed to mount /system"

114 fi

115 fi

116 fi

117

118 if [ -d $card/AndroidApps ] ; then

119 echo Copying Applications

120 if [ ! -d /data/app ] ; then

121 mkdir -m 0771 /data/app

122 fi

123 /bin/cp $card/AndroidApps/* /data/app

124 chown -R 1000:1000 /data/app

125 fi

126

127 if [ ! -d $card/media ] ; then

128 echo You have no media folder, please extract the resources to your SD card android folder

129 fi

130

131 /bin/rm -rf /data/etc

132 /bin/mkdir -m 0755 /data/etc

133 /bin/mkdir -p -m 0700 /data/mnt/secure

134 /bin/mkdir -p -m 0700 /data/mnt/asec

135 mount --bind /data/mnt/secure /mnt/secure

136 mount --bind /data/mnt/asec /mnt/asec

137 mount /data/etc /etc

138 cp -a /system/etc/* /etc

139 cp -ar /init.etc/* /etc/

140

141 LCDDENSITY=`/bin/grep -o "lcd.density=.*" /proc/cmdline | /bin/sed -e "s/.*lcd.density=//g" -e "s/ .*//g"`

142

143 if [ "$LCDDENSITY" != "" ] ; then

144 echo "ro.sf.lcd_density=$LCDDENSITY" >> /etc/default.prop

145 echo Setting ro.sf.lcd_density=$LCDDENSITY

146 fi

147

148 if [ ! -d /data/shared_prefs ] ; then

149 mkdir -m 0770 /data/shared_prefs

150 fi

151 chmod 0770 /data/shared_prefs

152 chown 1000:1000 /data/shared_prefs

153 mount /data/shared_prefs /shared_prefs

154

155 mount /sdcard/cache /tmp

156

157 cp /system/build.prop /tmp/build.prop

158 KAISER=0

159 DIAMOND=0

160 WIFI_TI=0

161 WIFI_BCM=0

162 XPERIA=0

163 WVGA=0

164 ### Is this a Kaiser?

165 if cat /proc/cpuinfo|grep -q Kaiser ; then

166 echo "KAISER detected"

167 KAISER=1

168 WIFI_TI=1

169 elif cat /proc/cpuinfo|grep -q Polaris ; then

170 echo "POLARIS detected"

171 KAISER=1

172 WIFI_TI=1

173 elif cat /proc/cpuinfo|grep -q Diamond ; then

174 echo "DIAMOND detected"

175 DIAMOND=1

176 WIFI_TI=1

177 elif cat /proc/cpuinfo|grep -q Raphael ; then

178 echo "RAPHAEL detected"

179 DIAMOND=1

180 WIFI_TI=1

181 elif cat /proc/cpuinfo|grep -q blackstone ; then

182 echo "BLACKSTONE detected"

183 DIAMOND=1

184 WIFI_TI=1

185 WVGA=1

186 elif cat /proc/cpuinfo|grep -q Topaz ; then

187 echo "TOPAZ detected"

188 DIAMOND=1

189 WIFI_TI=1

190 WVGA=1

191 elif cat /proc/cpuinfo|grep -q Kovsky ; then

192 echo "XPERIA detected"

193 XPERIA=1

194 WIFI_TI=1

195 WVGA=1

196 elif cat /proc/cpuinfo|grep -q Rhodium ; then

197 echo "RHODIUM detected"

198 DIAMOND=1

199 WIFI_BCM=1

200 WVGA=1

201 else

202 echo "VOGUE detected"

203 sed -i s/^wifi/#wifi/ /tmp/build.prop

204 fi

205

206 ### Fix su on some builds...

207 mount --bind /bin/su /system/bin/su 2> /dev/null

208 mount --bind /bin/su /system/xbin/su 2> /dev/null

209

210 RCSCRIPT=""

211 RCCONFIG=""

212

213 echo "Checking for build type..."

214 if [ -f /system/hero.build ] ; then

215 echo "Hero build detected"

216 RCSCRIPT="hero"

217 RCCONFIG="hero"

218 ln /data/app_s /system/app

219

220 elif [ -f /system/eclairhero.build ] ; then

221 echo "HERO 2.1 BUILD DETECTED -- ECLAIR"

222 RCSCRIPT="eclairhero"

223 RCCONFIG="eclairhero"

224 mount --bind /lib/eclair/hw /system/lib/hw

225

226 elif [ -f /system/eclair.build ] ; then

227 echo "Eclair build detected"

228 RCSCRIPT="eclair"

229 RCCONFIG="eclair"

230 mount --bind /lib/eclair/hw /system/lib/hw

231

232 elif [ -f /system/froyo.build ] ; then

233 echo "Froyo build detected"

234 RCSCRIPT="froyo"

235 RCCONFIG="froyo"

236 mount --bind /lib/froyo/hw /system/lib/hw

237

238 # vold: Fix sdcard device location for CDMA boards (thanks paalsteek)

239 if [ -d /sys/devices/platform/msm_sdcc.3 ]; then

240 /bin/sed -i -e 's:/devices/platform/msm_sdcc\.2:/devices/platform/msm_sdcc.3:g' /etc/vold.fstab

241 fi

242

243 elif [ -f /system/tattoo.build ] ; then

244 echo "Tattoo build detected"

245 RCSCRIPT="tattoo"

246 RCCONFIG="tattoo"

247

248 elif [ -f /system/donut.build ] ; then

249 echo "Donut build detected"

250 RCSCRIPT="donut"

251 RCCONFIG="donut"

252 mount --bind /lib/donut/hw /system/lib/hw

253

254 elif [ -d /system/lib/donut ] ; then

255 echo "Donut build detected"

256 RCSCRIPT="donut"

257 RCCONFIG="donut"

258

259 elif [ -f /system/xrom.build ] ; then

260 echo "xROM build detected"

261 RCSCRIPT="xrom"

262 RCCONFIG="xrom"

263

264 elif [ -f /system/rogers.build ] ; then

265 echo "Rogers build detected"

266 RCSCRIPT="rogers"

267 RCCONFIG="rogers"

268

269 elif [ -f /system/cyanogen.build ] ; then

270 echo "cyanogen experimental detected.....eating donuts"

271 RCSCRIPT="cyanogen"

272 RCCONFIG="cyanogen"

273

274 elif [ -f /system/custom.build ] ; then

275 echo "Custom init.rc detected"

276 cp /system/sysinit.rc /build.cfg/init.sysinit.rc

277 RCCONFIG="hero"

278 RCSCRIPT="sysinit"

279

280 else

281 echo "Unknown Android build. Assuming Ion variant"

282 RCSCRIPT="ion"

283 RCCONFIG="ion"

284

285 # for the fake sensors library

286 mount /lib/hw /system/lib/hw -o loop

287 chmod 666 /dev/input/event0

288

289 if [ $DIAMOND -eq 1 ] ; then

290 RCCONFIG="ion.diamond"

291 fi

292 fi

293

294 if [ $KAISER -eq 1 ] ; then

295 RCSCRIPT="$RCSCRIPT.kaiser"

296 fi

297

298 if [ $XPERIA -eq 1 ] ; then

299 echo "ro.sf.hwrotation=180" >> /etc/default.prop

300 fi

301 echo "using /init.$RCSCRIPT.rc as init.rc"

302 echo "using $card/conf/$RCCONFIG.user.conf"

303

304 cp "/init.cfg/init.$RCSCRIPT.rc" /etc/init.rc

305

306 #Assume this rootfs.img will be used only on "good" devices

307 #Meaning raph/diam/blac/

308

309 # echo /dev/block/mmcblk0p2 > /sys/devices/platform/usb_mass_storage/lun0/file

310 ifconfig usb0 192.168.20.1 up

311 busybox telnetd -b 192.168.20.1 -l /bin/sh

312 #chmod 4755 /bin/su

313 #mkdir -m 0777 /smodem

314 mknod /dev/urandom c 1 9

315 if [ -d /data/dropbear/ ] ; then

316 echo "Starting SSH"

317 mknod /dev/random c 1 8

318 /bin/dropbear -r /data/dropbear/dropbear_rsa_host_key -s

319 fi

320

321 #Only froyo atm

322 if [ "$WVGA" = "1" ] && [ "$RCSCRIPT" = "froyo" ];then

323 mount --bind /lib/froyo/hw/gralloc.msm7k_wvga.so /lib/froyo/hw/gralloc.msm7k.so

324 mount --bind /lib/froyo/hw/gralloc.msm7k_wvga.so /system/lib/hw/gralloc.msm7k.so

325 fi

326

327 if [ "$WIFI_TI" = "1" ] || [ "$WIFI_BCM" = "1" ];then

328 if [ -e "$card/modules-$(uname -r).tar.gz" ] && ! `strings /data/modules/wlan.ko 2>/dev/null | grep -q "vermagic=$(uname -r)"`; then

329 echo "Installing $card/modules-$(uname -r).tar.gz"

330 if [ ! -d "/data/modules" ] ; then

331 mkdir /data/modules

332 fi

333 tar xzf $card/modules-$(uname -r).tar.gz -C /data/modules

334 ln -s /data/modules /data/modules/`uname -r`

335

336 [ -f /etc/wifi/wlan.ko ] && rm /etc/wifi/wlan.ko

337 cp -R /etc/wifi/* /data/modules/

338 depmod

339 else

340 echo "Modules already unpacked for this kernel version -- skipping installation of $card/modules-$(uname -r).tar.gz"

341 fi

342 mount --bind /data/modules /lib/modules

343 mount --bind /data/modules /system/lib/modules

344 sed -i s/^#wifi/wifi/ /tmp/build.prop

345 fi

346

347 if [ -f /system/eclair.build ]

348 then

349 mount --bind /lib/eclair/libhardware_legacy.so /system/lib/libhardware_legacy.so

350 elif [ -f /system/froyo.build ]

351 then

352 mount --bind /lib/froyo/libhardware_legacy.so /system/lib/libhardware_legacy.so

353 fi

354

355 if [ "$WIFI_TI" = "1" ];then

356 if [ "`grep -c ^wifi /tmp/build.prop`" != "2" ]; then

357 echo "wifi.interface = tiwlan0" >> /tmp/build.prop

358 echo "wifi.supplicant_scan_interval = 45" >> /tmp/build.prop

359 fi

360 fi

361

362 if [ "$WIFI_BCM" = "1" ] ;then

363 if [ "`grep -c ^wifi /tmp/build.prop`" != "2" ]; then

364 echo "wifi.interface = eth0" >> /tmp/build.prop

365 echo "wifi.supplicant_scan_interval = 45" >> /tmp/build.prop

366 fi

367

368 # fyi: firmware is loaded from /etc/wifi/bcm432x/bcm4325-rtecdc.bin, nvram from /data/wifi-nvram.txt

369

370 mount --bind /etc/wifi/bcm432x/dhcpcd.conf /system/etc/dhcpcd/dhcpcd.conf

371 mount --bind /etc/wifi/bcm432x/wpa_supplicant.conf /system/etc/wifi/wpa_supplicant.conf

372

373 # init.rc: fix wpa_supplicant service

374 sed -i s/-itiwlan0/-ieth0/ /etc/init.rc

375 sed -i s/-Dtiwlan0/-Dwext/ /etc/init.rc

376

377 # init.rc: fix dhcpcd service, wifi.interface, and wpa_supplicant service socket

378 sed -i s/tiwlan0/eth0/ /etc/init.rc

379

380 # init.rc:

381 sed -i s/user\ wifi/#user\ wifi/ /etc/init.rc

382 sed -i s/group\ wifi/#group\ wifi/ /etc/init.rc

383

384 # extract nvram (todo: clean this up/integrate with TI calibration)

385 if [ ! -e /data/wifi-nvram.txt ]; then

386 for SKIP in 5744 4736;do

387 insmod /lib/modules/mtdchar.ko

388 mknod /dev/mtd0ro c 90 1

389 mkdir /lib/modules/$(uname -r)

390

391 dd if=/dev/mtd0ro of=/tmp/tempcal bs=8192 count=1 skip=$SKIP

392 rm /dev/mtd0ro

393 rmmod mtdchar

394 rmdir /lib/modules/$(uname -r)

395 dd if=/tmp/tempcal of=/data/wifi-nvram.txt bs=1 count=466

396 rm /tmp/tempcal

397

398 if grep nocrc= /data/wifi-nvram.txt 2>&1 > /dev/null;then

399 break

400 fi;

401 done

402 if [ "$SKIP" = "5744" ];then

403 echo "CDMA Rhodium detected"

404 fi;

405 if [ "$SKIP" = "4736" ];then

406 echo "GSM Rhodium detected"

407 fi;

408

409 fi

410 fi

411

412 mount --bind /tmp/build.prop /system/build.prop

413

414 if [ -f "$card/conf/$RCCONFIG.user.conf" ]; then

415 /bin/userinit.sh -c "$card/conf/$RCCONFIG.user.conf"

416 else

417 echo "No user config files ($RCCONFIG) found on sdcard"

418 fi

419

420 mount -tdebugfs none /dbgfs

421 #Activate baclight control

422 echo 3 > /sys/class/htc_hw/test

423 #Smooth scroll

424 echo 40 >/sys/devices/system/cpu/cpu0/cpufreq/ondemand/up_threshold

425 #Activate full charging

426 echo 2 > /dbgfs/htc_battery/charger_state

427

428 echo 1024 > /dbgfs/micropklt_dbg/sleep_leds

429

430 if /bin/grep -c 'physkeyboard=fuze' /proc/cmdline >/dev/null ; then

431 echo "USING RAPH110|FUZE LAYOUT"

432 cp -f /init.etc/keymaps/fuze_microp-keypad.kcm.bin /etc/keymaps/microp-keypad.kcm.bin

433 cp -f /init.etc/keymaps/fuze_microp-keypad.kl /etc/keymaps/microp-keypad.kl

434 cp -f /init.etc/keymaps/fuze_raph_navi_pad.kl /etc/keymaps/raph_navi_pad.kl

435 elif /bin/grep -c 'physkeyboard=raph' /proc/cmdline >/dev/null ; then

436 echo "USING NEW RAPH LAYOUT"

437 cp -f /init.etc/keymaps/raphfix_microp-keypad.kcm.bin /etc/keymaps/microp-keypad.kcm.bin

438 elif /bin/grep -c 'physkeyboard=nordic_raph' /proc/cmdline >/dev/null ; then

439 echo "USING NEW NORDIC RAPH LAYOUT"

440 cp -f /init.etc/keymaps/raphfix_microp-keypad-swedish.kcm.bin /etc/keymaps/microp-keypad.kcm.bin

441 elif /bin/grep -c 'physkeyboard=german_raph' /proc/cmdline >/dev/null ; then

442 echo "USING NEW GERMAN RAPH LAYOUT"

443 cp -f /init.etc/keymaps/microp-german.keypad.kcm.bin /etc/keymaps/microp-keypad.kcm.bin

444 elif /bin/grep -c 'physkeyboard=swiss_raph' /proc/cmdline >/dev/null ; then

445 echo "USING NEW SWISS RAPH LAYOUT"

446 cp -f /init.etc/keymaps/microp-swiss.keypad.kcm.bin /etc/keymaps/microp-keypad.kcm.bin

447 elif /bin/grep -c 'physkeyboard=tilt2' /proc/cmdline >/dev/null ; then

448 echo "USING EXPERIMENTAL TILT2 LAYOUT"

449 cp -f /init.etc/keymaps/tilt2_microp-keypad.kl /etc/keymaps/microp-keypad.kl

450 cp -f /init.etc/keymaps/tilt2_microp-keypad.kcm.bin /etc/keymaps/microp-keypad.kcm.bin

451 cp -f /init.etc/keymaps/tilt2_navi_pad.kl /etc/keymaps/raph_navi_pad.kl

452 elif /bin/grep -c 'physkeyboard=rhod210' /proc/cmdline >/dev/null ; then

453 echo "USING EXPERIMENTAL RHOD210 LAYOUT"

454 cp -f /init.etc/keymaps/rhod210_microp-keypad.kl /etc/keymaps/microp-keypad.kl

455 cp -f /init.etc/keymaps/rhod210_microp-keypad.kcm.bin /etc/keymaps/microp-keypad.kcm.bin

456 cp -f /init.etc/keymaps/rhod210_navi_pad.kl /etc/keymaps/raph_navi_pad.kl

457 elif /bin/grep -c 'physkeyboard=rhod100_de' /proc/cmdline >/dev/null ; then

458 echo "USING RHOD100 DE LAYOUT"

459 cp -f /init.etc/keymaps/rhod100_de_microp-keypad.kl /etc/keymaps/microp-keypad.kl

460 cp -f /init.etc/keymaps/rhod100_de_microp-keypad.kcm.bin /etc/keymaps/microp-keypad.kcm.bin

461 cp -f /init.etc/keymaps/rhod100_de_navi_pad.kl /etc/keymaps/raph_navi_pad.kl

462 elif /bin/grep -c 'physkeyboard=rhod100_fr' /proc/cmdline >/dev/null ; then

463 echo "USING RHOD100 FR LAYOUT"

464 cp -f /init.etc/keymaps/rhod100_fr_microp-keypad.kl /etc/keymaps/microp-keypad.kl

465 cp -f /init.etc/keymaps/rhod100_fr_microp-keypad.kcm.bin /etc/keymaps/microp-keypad.kcm.bin

466 cp -f /init.etc/keymaps/rhod100_fr_navi_pad.kl /etc/keymaps/raph_navi_pad.kl

467 elif /bin/grep -c 'physkeyboard=rhod100_it' /proc/cmdline >/dev/null ; then

468 echo "USING RHOD100 IT LAYOUT"

469 cp -f /init.etc/keymaps/rhod100_it_microp-keypad.kl /etc/keymaps/microp-keypad.kl

470 cp -f /init.etc/keymaps/rhod100_it_microp-keypad.kcm.bin /etc/keymaps/microp-keypad.kcm.bin

471 cp -f /init.etc/keymaps/rhod100_it_navi_pad.kl /etc/keymaps/raph_navi_pad.kl

472 elif /bin/grep -c 'physkeyboard=rhod100_uk' /proc/cmdline >/dev/null ; then

473 echo "USING RHOD100 UK LAYOUT"

474 cp -f /init.etc/keymaps/rhod100_uk_microp-keypad.kl /etc/keymaps/microp-keypad.kl

475 cp -f /init.etc/keymaps/rhod100_uk_microp-keypad.kcm.bin /etc/keymaps/microp-keypad.kcm.bin

476 cp -f /init.etc/keymaps/rhod100_uk_navi_pad.kl /etc/keymaps/raph_navi_pad.kl

477 elif /bin/grep -c 'physkeyboard=rhod100_nordic' /proc/cmdline >/dev/null ; then

478 echo "USING RHOD100 NORDIC LAYOUT"

479 cp -f /init.etc/keymaps/rhod100_nordic_microp-keypad.kl /etc/keymaps/microp-keypad.kl

480 cp -f /init.etc/keymaps/rhod100_nordic_microp-keypad.kcm.bin /etc/keymaps/microp-keypad.kcm.bin

481 cp -f /init.etc/keymaps/rhod100_nordic_navi_pad.kl /etc/keymaps/raph_navi_pad.kl

482 elif /bin/grep -c 'physkeyboard=rhod400' /proc/cmdline >/dev/null ; then

483 echo "USING EXPERIMENTAL RHOD400 LAYOUT"

484 cp -f /init.etc/keymaps/rhod400_microp-keypad.kl /etc/keymaps/microp-keypad.kl

485 cp -f /init.etc/keymaps/rhod400_microp-keypad.kcm.bin /etc/keymaps/microp-keypad.kcm.bin

486 cp -f /init.etc/keymaps/rhod400_navi_pad.kl /etc/keymaps/raph_navi_pad.kl #does not exist, just following example

487 elif /bin/grep -c 'physkeyboard=rhod500' /proc/cmdline >/dev/null ; then

488 echo "USING EXPERIMENTAL RHOD500 LAYOUT"

489 cp -f /init.etc/keymaps/rhod500_microp-keypad.kl /etc/keymaps/microp-keypad.kl

490 cp -f /init.etc/keymaps/rhod500_microp-keypad.kcm.bin /etc/keymaps/microp-keypad.kcm.bin

491 cp -f /init.etc/keymaps/rhod500_navi_pad.kl /etc/keymaps/raph_navi_pad.kl #does not exist, just following example

492 elif /bin/grep -c 'physkeyboard=kovsq' /proc/cmdline >/dev/null ; then

493 echo "USING KOVSKY QWERTY LAYOUT"

494 cp -f /init.etc/keymaps/kovsky-qwerty.kl /etc/keymaps/microp-keypad.kl

495 cp -f /init.etc/keymaps/kovsky-qwerty.kcm.bin /etc/keymaps/microp-keypad.kcm.bin

496 elif /bin/grep -c 'physkeyboard=kovsa' /proc/cmdline >/dev/null; then

497 echo "USING KOVSKY AZERTY LAYOUT"

498 cp -f /init.etc/keymaps/kovsky-azerty.kl /etc/keymaps/microp-keypad.kl

499 cp -f /init.etc/keymaps/kovsky-azerty.kcm.bin /etc/keymaps/microp-keypad.kcm.bin

500 else

501 echo "USING OLD KEYMAP"

502 cp -f /init.etc/keymaps/oldqwerty_microp-keypad.kcm.bin /etc/keymaps/microp-keypad.kcm.bin

503 cp -f /init.etc/keymaps/oldqwerty_microp-keypad.kl /etc/keymaps/microp-keypad.kl

504 cp -f /init.etc/keymaps/oldqwerty_raph_navi_pad.kl /etc/keymaps/raph_navi_pad.kl

505 fi

506

507 cp -af /init.etc/keymaps/qwerty.kcm.bin /init.etc/keymaps/qwerty.kl /etc/keymaps/

508 mount --bind /etc/keymaps /system/usr/keychars

509 mount --bind /etc/keymaps /system/usr/keylayout

510

511 for i in /sys/class/input/input* ; do

512 if [ "`cat $i/name`" = "tssc-manager" ] ; then

513 touchscreendir=$i

514 echo "Touchscreen device directory is $i"

515 fi

516 done

517

518 if [ -f $card/ts-calibration ] ; then

519 echo "Using Saved Touchscreen Calibration"

520 echo 128,128,1903,128,128,1907,1903,1907,1024,1024 > $touchscreendir/calibration_screen

521 cat $card/ts-calibration > $touchscreendir/calibration_points

522 else

523 mkdir /dev/graphics

524 mknod /dev/graphics/fb0 c 29 0

525 clear

526 echo; echo; echo; echo; echo; echo; echo; echo "Calibrating Touchscreen:"

527 echo "Click the Five Targets in order -- Top Left, Top Right, Middle, Bottom Left, Bottom Right"

528 echo "(Tap lightly. The screen is quite sensitive.)"

529 tssc-calibrate

530 echo 0,0,0,0,0,0,0,0,0,0 | cmp -s $touchscreendir/calibration_points # determine if calibration is still null -- means failed calibration

531 if [ $? -eq 0 ] ; then

532 echo "Touchscreen Calibration Failed"

533 else

534 echo "Touchscreen Calibration Successful; Saving..."

535 cat $touchscreendir/calibration_points > $card/ts-calibration

536 fi

537 fi

538

539 mkdir /dev/msm_camera

540 mknod /dev/msm_camera/control0 c 250 0

541 mknod /dev/msm_camera/config0 c 250 1

542 mknod /dev/msm_camera/frame0 c 250 2

543 chmod a+s /bin/pppd

544

545 # Generate a "serial number" for the Android system to identify the device.

546 # Put it in /data so it survives reboots. Won't survive a factory reset, though.

547 [ -f "/data/serialno" ] || echo -e `cat /dev/urandom | tr -dc 'A-Z0-9' | fold -w 12 | head -n 1` >/data/serialno

548

549 SERIALNO=$(cat /data/serialno)

550 cp /proc/cmdline /tmp/cmdline

551 sed -i -e "s:$: androidboot.serialno=${SERIALNO}:" /tmp/cmdline

552 mount --bind /tmp/cmdline /proc/cmdline

553

554 exec /init.android