gitorious.org Git - xdandroid:rootfs.git/blob

1 #!/bin/sh

2 fail() {

3 /bin/echo "Failed"

4 /bin/echo "$1"

5 exec /bin/sh

6 }

8 /bin/mount -o remount,rw / /

10 PATH=/sbin:/system/sbin:/system/bin:/bin:/system/xbin:/system/xbin/bb:/data/local/bin

12 /bin/echo "Rootfs loaded."

14 /bin/mount -t proc proc /proc

15 /bin/mount -t sysfs sys /sys

17 /bin/mount | grep mtd

18 notnand=$?

20 if [ $notnand = "0" ] ; then

21 echo "running from NAND"

22 /bin/mount -t yaffs2 /dev/block/mtdblock2 /system

23 /bin/mount -t yaffs2 /dev/block/mtdblock3 /data

24 fi

27 partition=mmcblk0p1

29 # Try unpartitioned card

30 if [ ! -d /sys/block/mmcblk0/$partition ] ; then

31 partition=mmcblk0

32 fi

34 if [ -f /sys/class/vogue_hw/gsmphone ] ; then

35 echo "GSM phone found"

36 fi

38 #mkdir -m 0777 /sdcard

39 #fsck already done in initrd

40 mount -t vfat -o fmask=0000,dmask=0000,rw,flush,noatime,nodiratime /dev/block/$partition /sdcard

41 [ $? -eq 0 ] || fail "Failed to mount the SD card. Cannot continue."

43 if [ ! -d /sdcard/cache ] ; then

44 mkdir /sdcard/cache

45 fi

47 #mkdir -m 0777 /cache

48 mount /sdcard/cache /cache

50 CARD_PATH=`/bin/grep -o "rel_path=.*" /proc/cmdline | /bin/sed -e "s/.*rel_path=//g" -e "s/ .*//g"`

51 if [ "$CARD_PATH" = "" ];then

52 CARD_PATH="andboot"

53 fi;

54 if [ -d /sdcard/$CARD_PATH ] ; then

55 card=/sdcard/$CARD_PATH

56 else

57 card=/sdcard

58 fi

61 if [ $notnand = "1" ] ; then

63 if [ -f $card/data.gz ] ; then

64 echo "Please wait... extracting Data Image"

65 if [ -f $card/data.img ] ; then

66 rm $card/data.img

67 fi

68 gzip -df $card/data.gz

69 [ $? -eq 0 ] || fail "Failed to extract Data Image"

70 mv $card/data $card/data.img

71 echo "done"

72 fi

74 PARTITIONED=0

75 echo "Checking for partition..."

76 if [ -d /sys/block/mmcblk0/mmcblk0p2 ] ; then

77 PARTITIONED=1

78 if [ -d /sys/block/mmcblk0/mmcblk0p3 ] ; then

79 PARTITIONED=2

80 fi

81 fi

83 if [ -f $card/backupsystem/installedsystem.sqsh -o -f $card/backupsystem/installedsystem.img -o -f $card/backupsystem.ext2 ]; then

84 echo "Partitioned Build Detected"

85 else

86 PARTITIONED=0

87 fi

89 if [ $PARTITIONED -lt 2 ] ; then

91 if [ ! -f $card/data.img ] ; then

92 echo "Creating a new Data store"

93 dd if=/dev/zero of=$card/data.img bs=1048576 count=256

94 [ $? -eq 0 ] || fail "Failed to allocate the storage"

95 mke2fs -F $card/data.img

96 [ $? -eq 0 ] || fail "Failed to format the storage"

97 fi

98 fi

100 if [ $PARTITIONED -lt 2 ] ; then

101 losetup /dev/block/loop0 $card/data.img

102 [ $? -eq 0 ] || fail "Failed to find data.img on SD Card"

103 e2fsck -y /dev/block/loop0

104 mount -t ext2 -o noatime,nodiratime,sync /dev/block/loop0 /data

105 else

106 e2fsck -y /dev/block/mmcblk0p3

107 mount -t ext2 -o noatime,nodiratime /dev/block/mmcblk0p3 /data

108 fi

109 [ $? -eq 0 ] || fail "Failed to mount /data"

110

111 if [ $PARTITIONED -eq 0 ] ; then

112 if [ -f $card/system.ext2 ] ; then

113 echo "Using uncompressed system"

114 losetup /dev/block/loop1 $card/system.ext2

115 [ $? -eq 0 ] || fail "Failed to reach system.ext2 on SD Card"

116 e2fsck -y /dev/block/loop1

117 mount -t ext2 -o noatime,nodiratime /dev/block/loop1 /system

118 [ $? -eq 0 ] || fail "Failed to mount /system"

119 elif

120 [ -f $card/system.sqsh ] ; then

121 echo "Using SquashFS system"

122 losetup /dev/block/loop1 $card/system.sqsh

123 [ $? -eq 0 ] || fail "Failed to find system.sqsh on SD Card"

124 mount -t squashfs -o ro,noatime,nodiratime /dev/block/loop1 /system

125 [ $? -eq 0 ] || fail "Failed to mount /system"

126 else

127 losetup /dev/block/loop1 $card/system.img

128 [ $? -eq 0 ] || fail "Failed to find system.img on SD Card"

129 mount -t cramfs -o ro,noatime,nodiratime /dev/block/loop1 /system

130 [ $? -eq 0 ] || fail "Failed to mount /system"

131 fi

132 else

133 echo "Using partitioned system"

134 e2fsck -y /dev/block/mmcblk0p2

135 mount -t ext2 -o ro,noatime,nodiratime /dev/block/mmcblk0p2 /system

136 [ $? -eq 0 ] || fail "Failed to mount /system"

137 fi

138 fi

139

140 if [ -d $card/AndroidApps ] ; then

141 echo Copying Applications

142 if [ ! -d /data/app ] ; then

143 mkdir -m 0771 /data/app

144 fi

145 /bin/cp $card/AndroidApps/* /data/app

146 chown -R 1000:1000 /data/app

147 fi

148

149 if [ ! -d $card/media ] ; then

150 echo You have no media folder, please extract the resources to your SD card android folder

151 fi

152

153 /bin/rm -rf /data/etc

154 /bin/mkdir -m 0755 /data/etc

155 mount /data/etc /etc

156 cp -a /system/etc/* /etc

157 cp -ar /init.etc/* /etc/

158

159 LCDDENSITY=`/bin/grep -o "lcd.density=.*" /proc/cmdline | /bin/sed -e "s/.*lcd.density=//g" -e "s/ .*//g"`

160

161 if [ "$LCDDENSITY" != "" ] ; then

162 echo "ro.sf.lcd_density=$LCDDENSITY" >> /etc/default.prop

163 echo Setting ro.sf.lcd_density=$LCDDENSITY

164 fi

165

166 if [ ! -d /data/shared_prefs ] ; then

167 mkdir -m 0770 /data/shared_prefs

168 fi

169 chmod 0770 /data/shared_prefs

170 chown 1000:1000 /data/shared_prefs

171 mount /data/shared_prefs /shared_prefs

172

173 mount /sdcard/cache /tmp

174

175 cp /system/build.prop /tmp/build.prop

176 KAISER=0

177 DIAMOND=0

178 WIFI_TI=0

179 WIFI_BCM=0

180 ### Is this a Kaiser?

181 if cat /proc/cpuinfo|grep -q Kaiser ; then

182 echo "KAISER detected"

183 KAISER=1

184 WIFI_TI=1

185 elif cat /proc/cpuinfo|grep -q Polaris ; then

186 echo "POLARIS detected"

187 KAISER=1

188 WIFI_TI=1

189 elif cat /proc/cpuinfo|grep -q Diamond ; then

190 echo "DIAMOND detected"

191 DIAMOND=1

192 WIFI_TI=1

193 elif cat /proc/cpuinfo|grep -q Raphael ; then

194 echo "RAPHAEL detected"

195 DIAMOND=1

196 WIFI_TI=1

197 elif cat /proc/cpuinfo|grep -q blackstone ; then

198 echo "BLACKSTONE detected"

199 DIAMOND=1

200 WIFI_TI=1

201 elif cat /proc/cpuinfo|grep -q Topaz ; then

202 echo "TOPAZ detected"

203 DIAMOND=1

204 WIFI_TI=1

205 elif cat /proc/cpuinfo|grep -q Rhodium ; then

206 echo "RHODIUM detected"

207 DIAMOND=1

208 WIFI_BCM=1

209 else

210 echo "VOGUE detected"

211 sed -i s/^wifi/#wifi/ /tmp/build.prop

212 fi

213

214 mount --bind /tmp/build.prop /system/build.prop

215

216 ### Fix su on some builds...

217 mount --bind /bin/su /system/bin/su 2> /dev/null

218 mount --bind /bin/su /system/xbin/su 2> /dev/null

219

220 RCSCRIPT=""

221 RCCONFIG=""

222

223 echo "Checking for build type..."

224 if [ -f /system/hero.build ] ; then

225 echo "Hero build detected"

226 RCSCRIPT="hero"

227 RCCONFIG="hero"

228 ln /data/app_s /system/app

229

230 elif [ -f /system/eclairhero.build ] ; then

231 echo "HERO 2.1 BUILD DETECTED -- ECLAIR"

232 RCSCRIPT="eclairhero"

233 RCCONFIG="eclairhero"

234

235 elif [ -f /system/eclair.build ] ; then

236 echo "Eclair build detected"

237 RCSCRIPT="eclair"

238 RCCONFIG="eclair"

239

240 elif [ -f /system/tattoo.build ] ; then

241 echo "Tattoo build detected"

242 RCSCRIPT="tattoo"

243 RCCONFIG="tattoo"

244

245 elif [ -f /system/donut.build ] ; then

246 echo "Donut build detected"

247 RCSCRIPT="donut"

248 RCCONFIG="donut"

249

250 elif [ -d /system/lib/donut ] ; then

251 echo "Donut build detected"

252 RCSCRIPT="donut"

253 RCCONFIG="donut"

254

255 elif [ -f /system/xrom.build ] ; then

256 echo "xROM build detected"

257 RCSCRIPT="xrom"

258 RCCONFIG="xrom"

259

260 elif [ -f /system/rogers.build ] ; then

261 echo "Rogers build detected"

262 RCSCRIPT="rogers"

263 RCCONFIG="rogers"

264

265 elif [ -f /system/cyanogen.build ] ; then

266 echo "cyanogen experimental detected.....eating donuts"

267 RCSCRIPT="cyanogen"

268 RCCONFIG="cyanogen"

269

270 elif [ -f /system/custom.build ] ; then

271 echo "Custom init.rc detected"

272 cp /system/sysinit.rc /build.cfg/init.sysinit.rc

273 RCCONFIG="hero"

274 RCSCRIPT="sysinit"

275

276 else

277 echo "Unknown Android build. Assuming Ion variant"

278 RCSCRIPT="ion"

279 RCCONFIG="ion"

280

281 # for the fake sensors library

282 mount /lib/hw /system/lib/hw -o loop

283 chmod 666 /dev/input/event0

284

285 if [ $DIAMOND -eq 1 ] ; then

286 RCCONFIG="ion.diamond"

287 fi

288 fi

289

290 if [ $KAISER -eq 1 ] ; then

291 RCSCRIPT="$RCSCRIPT.kaiser"

292 fi

293

294 echo "using /init.$RCSCRIPT.rc as init.rc"

295 echo "using $card/conf/$RCCONFIG.user.conf"

296

297 cp "/init.cfg/init.$RCSCRIPT.rc" /etc/init.rc

298

299 #Assume this rootfs.img will be used only on "good" devices

300 #Meaning raph/diam/blac/

301

302 # echo /dev/block/mmcblk0p2 > /sys/devices/platform/usb_mass_storage/lun0/file

303 ifconfig usb0 192.168.20.1 up

304 busybox telnetd -b 192.168.20.1 -l /bin/sh

305 #chmod 4755 /bin/su

306 #mkdir -m 0777 /smodem

307 if [ -d /data/dropbear/ ] ; then

308 echo "Starting SSH"

309 mknod /dev/random c 1 8

310 mknod /dev/urandom c 1 9

311 /bin/dropbear -r /data/dropbear/dropbear_rsa_host_key -s

312 fi

313

314 if [ "$WIFI_TI" = "1" ] || [ "$WIFI_BCM" = "1" ];then

315 if [ -e "$card/modules-$(uname -r).tar.gz" ] ;then

316 echo "Installing $card/modules-$(uname -r).tar.gz"

317 if [ ! -d "/data/modules" ] ; then

318 mkdir /data/modules

319 fi

320 mount --bind /data/modules /lib/modules

321 tar xzf $card/modules-$(uname -r).tar.gz -C /lib/modules

322 cd /lib/modules

323 cp wlan.ko /etc/wifi

324 cp bcm4329.ko /etc/wifi

325 fi

326 mount --bind /etc/wifi /system/lib/modules

327

328 sed -i s/^#wifi/wifi/ /tmp/build.prop

329 fi

330

331 if [ "$WIFI_TI" = "1" ];then

332 if [ "`grep -c ^wifi /tmp/build.prop`" != "2" ]; then

333 echo "wifi.interface = tiwlan0" >> /tmp/build.prop

334 echo "wifi.supplicant_scan_interval = 45" >> /tmp/build.prop

335 fi

336 fi

337

338 if [ "$WIFI_BCM" = "1" ];then

339 if [ "`grep -c ^wifi /tmp/build.prop`" != "2" ]; then

340 echo "wifi.interface = eth0" >> /tmp/build.prop

341 echo "wifi.supplicant_scan_interval = 45" >> /tmp/build.prop

342 fi

343

344 # fyi: firmware is loaded from /etc/wifi/bcm432x/bcm4325-rtecdc.bin, nvram from /data/wifi-nvram.txt

345

346 mount --bind /etc/wifi/bcm432x/dhcpcd.conf /system/etc/dhcpcd/dhcpcd.conf

347 mount --bind /etc/wifi/bcm432x/wpa_supplicant.conf /system/etc/wifi/wpa_supplicant.conf

348 mount --bind /etc/wifi/bcm432x/bcm4325-libhardware_legacy.so /system/lib/libhardware_legacy.so

349

350 # init.rc: fix wpa_supplicant service

351 sed -i s/-itiwlan0/-ieth0/ /etc/init.rc

352 sed -i s/-Dtiwlan0/-Dwext/ /etc/init.rc

353

354 # init.rc: fix dhcpcd service, wifi.interface, and wpa_supplicant service socket

355 sed -i s/tiwlan0/eth0/ /etc/init.rc

356

357 # init.rc:

358 sed -i s/user\ wifi/#user\ wifi/ /etc/init.rc

359 sed -i s/group\ wifi/#group\ wifi/ /etc/init.rc

360

361 # extract nvram (todo: clean this up/integrate with TI calibration)

362 if [ ! -e /data/wifi-nvram.txt ]; then

363 for SKIP in 5744 4736;do

364 insmod /lib/modules/mtdchar.ko

365 mknod /dev/mtd0ro c 90 1

366 mkdir /lib/modules/$(uname -r)

367

368 dd if=/dev/mtd0ro of=/tmp/tempcal bs=8192 count=1 skip=$SKIP

369 rm /dev/mtd0ro

370 rmmod mtdchar

371 rmdir /lib/modules/$(uname -r)

372 dd if=/tmp/tempcal of=/data/wifi-nvram.txt bs=1 count=466

373 rm /tmp/tempcal

374

375 if grep nocrc= /data/wifi-nvram.txt 2>&1 > /dev/null;then

376 break

377 fi;

378 done

379 if [ "$SKIP" = "5744" ];then

380 echo "CDMA Rhodium detected"

381 fi;

382 if [ "$SKIP" = "4736" ];then

383 echo "GSM Rhodium detected"

384 fi;

385

386 fi

387 fi

388

389

390 if [ -f "$card/conf/$RCCONFIG.user.conf" ]; then

391 /bin/userinit.sh -c "$card/conf/$RCCONFIG.user.conf"

392 else

393 echo "No user config files ($RCCONFIG) found on sdcard"

394 fi

395

396 mount -tdebugfs none /dbgfs

397 #Activate baclight control

398 echo 3 > /sys/class/htc_hw/test

399 #Smooth scroll

400 echo 40 >/sys/devices/system/cpu/cpu0/cpufreq/ondemand/up_threshold

401 #Activate full charging

402 echo 2 > /dbgfs/htc_battery/charger_state

403

404 echo 1024 > /dbgfs/micropklt_dbg/sleep_leds

405

406 if /bin/grep -c 'physkeyboard=fuze' /proc/cmdline >/dev/null ; then

407 echo "USING RAPH110|FUZE LAYOUT"

408 cp -f /init.etc/keymaps/fuze_microp-keypad.kcm.bin /etc/keymaps/microp-keypad.kcm.bin

409 cp -f /init.etc/keymaps/fuze_microp-keypad.kl /etc/keymaps/microp-keypad.kl

410 cp -f /init.etc/keymaps/fuze_raph_navi_pad.kl /etc/keymaps/raph_navi_pad.kl

411 elif /bin/grep -c 'physkeyboard=raph' /proc/cmdline >/dev/null ; then

412 echo "USING NEW RAPH LAYOUT"

413 cp -f /init.etc/keymaps/raphfix_microp-keypad.kcm.bin /etc/keymaps/microp-keypad.kcm.bin

414 elif /bin/grep -c 'physkeyboard=tilt2' /proc/cmdline >/dev/null ; then

415 echo "USING EXPERIMENTAL TILT2 LAYOUT"

416 cp -f /init.etc/keymaps/tilt2_microp-keypad.kl /etc/keymaps/microp-keypad.kl

417 cp -f /init.etc/keymaps/tilt2_microp-keypad.kcm.bin /etc/keymaps/microp-keypad.kcm.bin

418 cp -f /init.etc/keymaps/tilt2_navi_pad.kl /etc/keymaps/raph_navi_pad.kl

419 elif /bin/grep -c 'physkeyboard=rhod210' /proc/cmdline >/dev/null ; then

420 echo "USING EXPERIMENTAL RHOD210 LAYOUT"

421 cp -f /init.etc/keymaps/rhod210_microp-keypad.kl /etc/keymaps/microp-keypad.kl

422 cp -f /init.etc/keymaps/rhod210_microp-keypad.kcm.bin /etc/keymaps/microp-keypad.kcm.bin

423 cp -f /init.etc/keymaps/rhod210_navi_pad.kl /etc/keymaps/raph_navi_pad.kl

424 elif /bin/grep -c 'physkeyboard=rhod100_de' /proc/cmdline >/dev/null ; then

425 echo "USING RHOD100 DE LAYOUT"

426 cp -f /init.etc/keymaps/rhod100_de_microp-keypad.kl /etc/keymaps/microp-keypad.kl

427 cp -f /init.etc/keymaps/rhod100_de_microp-keypad.kcm.bin /etc/keymaps/microp-keypad.kcm.bin

428 cp -f /init.etc/keymaps/rhod100_de_navi_pad.kl /etc/keymaps/raph_navi_pad.kl

429 elif /bin/grep -c 'physkeyboard=rhod100_fr' /proc/cmdline >/dev/null ; then

430 echo "USING RHOD100 FR LAYOUT"

431 cp -f /init.etc/keymaps/rhod100_fr_microp-keypad.kl /etc/keymaps/microp-keypad.kl

432 cp -f /init.etc/keymaps/rhod100_fr_microp-keypad.kcm.bin /etc/keymaps/microp-keypad.kcm.bin

433 cp -f /init.etc/keymaps/rhod100_fr_navi_pad.kl /etc/keymaps/raph_navi_pad.kl

434 elif /bin/grep -c 'physkeyboard=rhod100_it' /proc/cmdline >/dev/null ; then

435 echo "USING RHOD100 IT LAYOUT"

436 cp -f /init.etc/keymaps/rhod100_it_microp-keypad.kl /etc/keymaps/microp-keypad.kl

437 cp -f /init.etc/keymaps/rhod100_it_microp-keypad.kcm.bin /etc/keymaps/microp-keypad.kcm.bin

438 cp -f /init.etc/keymaps/rhod100_it_navi_pad.kl /etc/keymaps/raph_navi_pad.kl

439 elif /bin/grep -c 'physkeyboard=rhod100_uk' /proc/cmdline >/dev/null ; then

440 echo "USING RHOD100 UK LAYOUT"

441 cp -f /init.etc/keymaps/rhod100_uk_microp-keypad.kl /etc/keymaps/microp-keypad.kl

442 cp -f /init.etc/keymaps/rhod100_uk_microp-keypad.kcm.bin /etc/keymaps/microp-keypad.kcm.bin

443 cp -f /init.etc/keymaps/rhod100_uk_navi_pad.kl /etc/keymaps/raph_navi_pad.kl

444 else

445 echo "USING OLD KEYMAP"

446 cp -f /init.etc/keymaps/oldqwerty_microp-keypad.kcm.bin /etc/keymaps/microp-keypad.kcm.bin

447 cp -f /init.etc/keymaps/oldqwerty_microp-keypad.kl /etc/keymaps/microp-keypad.kl

448 cp -f /init.etc/keymaps/oldqwerty_raph_navi_pad.kl /etc/keymaps/raph_navi_pad.kl

449 fi

450

451 for i in /sys/class/input/input* ; do

452 if [ "`cat $i/name`" = "tssc-manager" ] ; then

453 touchscreendir=$i

454 echo "Touchscreen device directory is $i"

455 fi

456 done

457

458 if [ -f $card/ts-calibration ] ; then

459 echo "Using Saved Touchscreen Calibration"

460 echo 128,128,1903,128,128,1907,1903,1907,1024,1024 > $touchscreendir/calibration_screen

461 cat $card/ts-calibration > $touchscreendir/calibration_points

462 else

463 mkdir /dev/graphics

464 mknod /dev/graphics/fb0 c 29 0

465 clear

466 echo; echo; echo; echo; echo; echo; echo; echo "Calibrating Touchscreen:"

467 echo "Click the Five Targets in order -- Top Left, Top Right, Middle, Bottom Left, Bottom Right"

468 echo "(Tap lightly. The screen is quite sensitive.)"

469 tssc-calibrate

470 echo 0,0,0,0,0,0,0,0,0,0 | cmp -s $touchscreendir/calibration_points # determine if calibration is still null -- means failed calibration

471 if [ $? -eq 0 ] ; then

472 echo "Touchscreen Calibration Failed"

473 else

474 echo "Touchscreen Calibration Successful; Saving..."

475 cat $touchscreendir/calibration_points > $card/ts-calibration

476 fi

477 fi

478

479 mkdir /dev/msm_camera

480 mknod /dev/msm_camera/control0 c 250 0

481 mknod /dev/msm_camera/config0 c 250 1

482 mknod /dev/msm_camera/frame0 c 250 2

483 chmod a+s /bin/pppd

484

485 exec /init.android