Update rhod keymaps for new power button scancode
[xdandroid:rootfs.git] / init
1 #!/bin/sh
2 fail() {
3         /bin/echo "Failed"
4                 /bin/echo "$1"
5                 exec /bin/sh
6 }
7
8 /bin/mount -o remount,rw / /
9
10 PATH=/sbin:/system/sbin:/bin:/system/bin:/system/xbin:/system/xbin/bb:/data/local/bin
11
12 /bin/echo "Rootfs loaded."
13
14 /bin/mount -t proc proc /proc
15 /bin/mount -t sysfs sys /sys
16
17 /bin/mount | grep mtd
18 notnand=$?
19
20 if [ $notnand = "0" ] ; then
21   echo "running from NAND"
22   /bin/mount -t yaffs2 /dev/block/mtdblock2 /system
23   /bin/mount -t yaffs2 /dev/block/mtdblock3 /data
24 fi
25
26
27 partition=mmcblk0p1
28
29 # Try unpartitioned card
30 if [ ! -d /sys/block/mmcblk0/$partition ] ; then
31         partition=mmcblk0
32 fi
33
34 if [ -f /sys/class/vogue_hw/gsmphone ] ; then
35         echo "GSM phone found"
36 fi
37
38 #mkdir -m 0777 /sdcard
39 #fsck already done in initrd
40 mount -t vfat -o fmask=0000,dmask=0000,rw,flush,relatime,utf8 /dev/block/$partition /sdcard
41 [ $? -eq 0 ] || fail "Failed to mount the SD card. Cannot continue."
42
43 if [ ! -d /sdcard/cache ] ; then
44         mkdir /sdcard/cache
45 fi
46
47 #mkdir -m 0777 /cache
48 mount /sdcard/cache /cache
49
50 CARD_PATH=`/bin/grep -o "rel_path=.*" /proc/cmdline | /bin/sed -e "s/.*rel_path=//g" -e "s/ .*//g"`
51 if [ "$CARD_PATH" = "" ];then
52         CARD_PATH="andboot"
53 fi;
54 if [ -d /sdcard/$CARD_PATH ] ; then
55         card=/sdcard/$CARD_PATH
56 else
57         card=/sdcard
58 fi
59
60
61 if [ $notnand = "1" ] ; then
62     
63     if [ -f $card/data.gz ] ; then
64             echo "Please wait... extracting Data Image"
65             if [ -f $card/data.img ] ; then
66                     rm $card/data.img
67             fi
68             gzip -df $card/data.gz
69             [ $? -eq 0 ] || fail "Failed to extract Data Image"
70             mv $card/data $card/data.img
71             echo "done"
72     fi
73     
74     if [ -d /sys/block/mmcblk0/mmcblk0p4 ] && /bin/grep -q -v no_partitions /proc/cmdline ; then
75             echo "Using partitioned system"
76             /bin/e2fsck -y /dev/block/mmcblk0p3
77             mount -t ext2 -o ro,relatime /dev/block/mmcblk0p3 /system
78             /bin/e2fsck -y /dev/block/mmcblk0p4
79             mount -t ext2 -o relatime /dev/block/mmcblk0p4 /data
80     else
81             echo "Using loopback filesystems"
82             if [ ! -f $card/data.img ] ; then
83                     echo "Creating a new Data store"
84                     dd if=/dev/zero of=$card/data.img bs=1048576 count=256
85                     [ $? -eq 0 ] || fail "Failed to allocate the storage"
86                     mke2fs -F $card/data.img
87                     [ $? -eq 0 ] || fail "Failed to format the storage"
88             fi
89
90             losetup /dev/block/loop0 $card/data.img
91             [ $? -eq 0 ] || fail "Failed to find data.img on SD Card"
92             e2fsck -y /dev/block/loop0
93             mount -t ext2 -o relatime /dev/block/loop0 /data
94
95             if      [ -f $card/system.ext2 ] ; then
96                     echo "Using uncompressed system"
97                     losetup /dev/block/loop1 $card/system.ext2
98                     [ $? -eq 0 ] || fail "Failed to reach system.ext2 on SD Card"
99                     e2fsck -y /dev/block/loop1
100                     mount -t ext2 -o relatime /dev/block/loop1 /system
101                     [ $? -eq 0 ] || fail "Failed to mount /system"
102             elif    
103                     [ -f $card/system.sqsh ] ; then
104                     echo "Using SquashFS system"
105                     losetup /dev/block/loop1 $card/system.sqsh
106                     [ $? -eq 0 ] || fail "Failed to find system.sqsh on SD Card"
107                     mount -t squashfs -o ro,relatime /dev/block/loop1 /system
108                     [ $? -eq 0 ] || fail "Failed to mount /system"
109             else
110                     losetup /dev/block/loop1 $card/system.img
111                     [ $? -eq 0 ] || fail "Failed to find system.img on SD Card"
112                     mount -t cramfs -o ro,relatime /dev/block/loop1 /system
113                     [ $? -eq 0 ] || fail "Failed to mount /system"
114             fi
115     fi
116 fi
117
118 if [ -d $card/AndroidApps ] ; then
119         echo Copying Applications
120         if [ ! -d /data/app ] ; then
121                 mkdir -m 0771 /data/app
122         fi
123         /bin/cp $card/AndroidApps/* /data/app
124         chown -R 1000:1000 /data/app
125 fi
126
127 if [ ! -d $card/media ] ; then
128         echo You have no media folder, please extract the resources to your SD card android folder
129 fi
130
131 /bin/rm -rf /data/etc
132 /bin/mkdir -m 0755 /data/etc
133 /bin/mkdir -p -m 0700 /data/mnt/secure
134 /bin/mkdir -p -m 0700 /data/mnt/asec
135 mount --bind /data/mnt/secure /mnt/secure
136 mount --bind /data/mnt/asec /mnt/asec
137 mount /data/etc /etc
138 cp -a /system/etc/* /etc
139 cp -ar /init.etc/* /etc/
140
141 LCDDENSITY=`/bin/grep -o "lcd.density=.*" /proc/cmdline | /bin/sed -e "s/.*lcd.density=//g" -e "s/ .*//g"`
142
143 if [ "$LCDDENSITY" != "" ] ; then
144         echo "ro.sf.lcd_density=$LCDDENSITY" >> /etc/default.prop
145         echo Setting ro.sf.lcd_density=$LCDDENSITY
146 fi
147
148 if [ ! -d /data/shared_prefs ] ; then
149         mkdir -m 0770 /data/shared_prefs
150 fi
151 chmod 0770 /data/shared_prefs
152 chown 1000:1000 /data/shared_prefs
153 mount /data/shared_prefs /shared_prefs
154
155 mount /sdcard/cache /tmp
156
157 cp /system/build.prop /tmp/build.prop
158 KAISER=0
159 DIAMOND=0
160 WIFI_TI=0
161 WIFI_BCM=0
162 XPERIA=0
163 WVGA=0
164 ### Is this a Kaiser?
165 if cat /proc/cpuinfo|grep -q Kaiser ; then
166         echo "KAISER detected"
167         KAISER=1
168         WIFI_TI=1
169 elif cat /proc/cpuinfo|grep -q Polaris ; then
170         echo "POLARIS detected"
171         KAISER=1
172         WIFI_TI=1
173 elif cat /proc/cpuinfo|grep -q Diamond ; then
174         echo "DIAMOND detected"
175         DIAMOND=1
176         WIFI_TI=1
177 elif cat /proc/cpuinfo|grep -q Raphael ; then
178         echo "RAPHAEL detected"
179         DIAMOND=1
180         WIFI_TI=1
181 elif cat /proc/cpuinfo|grep -q blackstone ; then
182         echo "BLACKSTONE detected"
183         DIAMOND=1
184         WIFI_TI=1
185         WVGA=1
186 elif cat /proc/cpuinfo|grep -q Topaz ; then
187         echo "TOPAZ detected"
188         DIAMOND=1
189         WIFI_TI=1
190         WVGA=1
191 elif cat /proc/cpuinfo|grep -q Kovsky ; then
192         echo "XPERIA detected"
193         XPERIA=1
194         WIFI_TI=1
195         WVGA=1
196 elif cat /proc/cpuinfo|grep -q Rhodium ; then
197         echo "RHODIUM detected"
198         DIAMOND=1
199         WIFI_BCM=1
200         WVGA=1
201 else
202         echo "VOGUE detected"
203         sed -i s/^wifi/#wifi/ /tmp/build.prop
204 fi
205
206 ### Fix su on some builds...
207 mount --bind /bin/su /system/bin/su 2> /dev/null
208 mount --bind /bin/su /system/xbin/su 2> /dev/null
209
210 RCSCRIPT=""
211 RCCONFIG=""
212
213 echo "Checking for build type..."
214 if [ -f /system/hero.build ] ; then
215         echo "Hero build detected"
216         RCSCRIPT="hero"
217         RCCONFIG="hero"
218         ln /data/app_s /system/app
219
220 elif [ -f /system/eclairhero.build ] ; then
221         echo "HERO 2.1 BUILD DETECTED -- ECLAIR"
222         RCSCRIPT="eclairhero"
223         RCCONFIG="eclairhero"
224         mount --bind /lib/eclair/hw /system/lib/hw
225
226 elif [ -f /system/eclair.build ] ; then
227         echo "Eclair build detected"
228         RCSCRIPT="eclair"
229         RCCONFIG="eclair"
230         mount --bind /lib/eclair/hw /system/lib/hw
231
232 elif [ -f /system/froyo.build ] ; then
233         echo "Froyo build detected"
234         RCSCRIPT="froyo"
235         RCCONFIG="froyo"
236         mount --bind /lib/froyo/hw /system/lib/hw
237
238         # vold: Fix sdcard device location for CDMA boards (thanks paalsteek)
239         if [ -d /sys/devices/platform/msm_sdcc.3 ]; then
240                 /bin/sed -i -e 's:/devices/platform/msm_sdcc\.2:/devices/platform/msm_sdcc.3:g' /etc/vold.fstab
241         fi
242
243 elif [ -f /system/tattoo.build ] ; then
244         echo "Tattoo build detected"
245         RCSCRIPT="tattoo"
246         RCCONFIG="tattoo"
247
248 elif [ -f /system/donut.build ] ; then
249         echo "Donut build detected"
250         RCSCRIPT="donut"
251         RCCONFIG="donut"
252         mount --bind /lib/donut/hw /system/lib/hw
253
254 elif [ -d /system/lib/donut ] ; then
255         echo "Donut build detected"
256         RCSCRIPT="donut"
257         RCCONFIG="donut"
258
259 elif [ -f /system/xrom.build ] ; then
260         echo "xROM build detected"
261         RCSCRIPT="xrom"
262         RCCONFIG="xrom"
263
264 elif [ -f /system/rogers.build ] ; then
265         echo "Rogers build detected"
266         RCSCRIPT="rogers"
267         RCCONFIG="rogers"
268
269 elif [ -f /system/cyanogen.build ] ; then
270         echo "cyanogen experimental detected.....eating donuts"
271         RCSCRIPT="cyanogen"
272         RCCONFIG="cyanogen"
273
274 elif [ -f /system/custom.build ] ; then
275         echo "Custom init.rc detected"
276         cp /system/sysinit.rc /build.cfg/init.sysinit.rc
277         RCCONFIG="hero"
278         RCSCRIPT="sysinit"
279         
280 else
281         echo "Unknown Android build. Assuming Ion variant"
282         RCSCRIPT="ion"
283         RCCONFIG="ion"
284
285         # for the fake sensors library
286         mount /lib/hw /system/lib/hw -o loop
287         chmod 666 /dev/input/event0
288
289         if [ $DIAMOND -eq 1 ] ; then
290                 RCCONFIG="ion.diamond"
291         fi
292 fi
293
294 if [ $KAISER -eq 1 ] ; then
295         RCSCRIPT="$RCSCRIPT.kaiser"
296 fi
297
298 if [ $XPERIA -eq 1 ] ; then
299         echo "ro.sf.hwrotation=180" >> /etc/default.prop
300 fi
301 echo "using /init.$RCSCRIPT.rc as init.rc"
302 echo "using $card/conf/$RCCONFIG.user.conf"
303
304 cp "/init.cfg/init.$RCSCRIPT.rc" /etc/init.rc
305
306 #Assume this rootfs.img will be used only on "good" devices
307 #Meaning raph/diam/blac/
308
309 # echo /dev/block/mmcblk0p2 > /sys/devices/platform/usb_mass_storage/lun0/file
310 ifconfig usb0 192.168.20.1 up
311 busybox telnetd -b 192.168.20.1 -l /bin/sh
312 #chmod 4755 /bin/su
313 #mkdir -m 0777 /smodem
314 mknod /dev/urandom c 1 9
315 if [ -d /data/dropbear/ ] ; then
316         echo "Starting SSH"
317         mknod /dev/random c 1 8
318         /bin/dropbear -r /data/dropbear/dropbear_rsa_host_key -s
319 fi
320
321 #Only froyo atm
322 if [ "$WVGA" = "1" ] && [ "$RCSCRIPT" = "froyo" ];then
323         mount --bind /lib/froyo/hw/gralloc.msm7k_wvga.so /lib/froyo/hw/gralloc.msm7k.so
324         mount --bind /lib/froyo/hw/gralloc.msm7k_wvga.so /system/lib/hw/gralloc.msm7k.so
325 fi
326
327 if [ "$WIFI_TI" = "1" ] || [ "$WIFI_BCM" = "1" ];then
328         if [ -e "$card/modules-$(uname -r).tar.gz" ] && ! `strings /data/modules/wlan.ko 2>/dev/null | grep -q "vermagic=$(uname -r)"`; then
329                 echo "Installing $card/modules-$(uname -r).tar.gz"
330                 if [ ! -d "/data/modules" ] ; then
331                         mkdir /data/modules
332                 fi
333                 tar xzf $card/modules-$(uname -r).tar.gz -C /data/modules
334                 ln -s /data/modules /data/modules/`uname -r`
335
336                 [ -f /etc/wifi/wlan.ko ] && rm /etc/wifi/wlan.ko
337                 cp -R /etc/wifi/* /data/modules/
338                 depmod
339         else
340                 echo "Modules already unpacked for this kernel version -- skipping installation of $card/modules-$(uname -r).tar.gz"
341         fi
342         mount --bind /data/modules /lib/modules
343         mount --bind /data/modules /system/lib/modules
344         sed -i s/^#wifi/wifi/ /tmp/build.prop
345 fi
346
347 if [ -f /system/eclair.build ]
348 then
349         mount --bind /lib/eclair/libhardware_legacy.so /system/lib/libhardware_legacy.so
350 elif [ -f /system/froyo.build ]
351 then
352         mount --bind /lib/froyo/libhardware_legacy.so /system/lib/libhardware_legacy.so
353 fi
354
355 if [ "$WIFI_TI" = "1" ];then
356         if [ "`grep -c ^wifi /tmp/build.prop`" != "2" ]; then
357                 echo "wifi.interface = tiwlan0" >> /tmp/build.prop
358                 echo "wifi.supplicant_scan_interval = 45" >> /tmp/build.prop
359         fi
360 fi
361
362 if [ "$WIFI_BCM" = "1" ] ;then
363         if [ "`grep -c ^wifi /tmp/build.prop`" != "2" ]; then
364                 echo "wifi.interface = eth0" >> /tmp/build.prop
365                 echo "wifi.supplicant_scan_interval = 45" >> /tmp/build.prop
366         fi
367
368         # fyi: firmware is loaded from /etc/wifi/bcm432x/bcm4325-rtecdc.bin, nvram from /data/wifi-nvram.txt
369
370         mount --bind /etc/wifi/bcm432x/dhcpcd.conf /system/etc/dhcpcd/dhcpcd.conf
371         mount --bind /etc/wifi/bcm432x/wpa_supplicant.conf /system/etc/wifi/wpa_supplicant.conf
372
373         # init.rc: fix wpa_supplicant service
374         sed -i s/-itiwlan0/-ieth0/ /etc/init.rc
375         sed -i s/-Dtiwlan0/-Dwext/ /etc/init.rc
376
377         # init.rc: fix dhcpcd service, wifi.interface, and wpa_supplicant service socket
378         sed -i s/tiwlan0/eth0/ /etc/init.rc
379
380         # init.rc:
381         sed -i s/user\ wifi/#user\ wifi/ /etc/init.rc
382         sed -i s/group\ wifi/#group\ wifi/ /etc/init.rc
383
384         # extract nvram (todo: clean this up/integrate with TI calibration)
385         if [ ! -e /data/wifi-nvram.txt ]; then
386                 for SKIP in 5744 4736;do
387                         insmod /lib/modules/mtdchar.ko
388                         mknod /dev/mtd0ro c 90 1
389                         mkdir /lib/modules/$(uname -r)
390
391                         dd if=/dev/mtd0ro of=/tmp/tempcal bs=8192 count=1 skip=$SKIP
392                         rm /dev/mtd0ro
393                         rmmod mtdchar
394                         rmdir /lib/modules/$(uname -r)
395                         dd if=/tmp/tempcal of=/data/wifi-nvram.txt bs=1 count=466
396                         rm /tmp/tempcal
397                 
398                         if grep nocrc= /data/wifi-nvram.txt 2>&1 > /dev/null;then 
399                                 break
400                         fi;
401                 done
402                 if [ "$SKIP" = "5744" ];then
403                         echo "CDMA Rhodium detected"
404                 fi;
405                 if [ "$SKIP" = "4736" ];then
406                         echo "GSM Rhodium detected"
407                 fi;
408
409         fi
410 fi
411
412 mount --bind /tmp/build.prop /system/build.prop
413
414 if [ -f "$card/conf/$RCCONFIG.user.conf" ]; then
415         /bin/userinit.sh -c "$card/conf/$RCCONFIG.user.conf"
416 else
417         echo "No user config files ($RCCONFIG) found on sdcard"
418 fi
419
420 mount -tdebugfs none /dbgfs
421 #Activate baclight control
422 echo 3 > /sys/class/htc_hw/test
423 #Smooth scroll
424 echo 40 >/sys/devices/system/cpu/cpu0/cpufreq/ondemand/up_threshold
425 #Activate full charging
426 echo 2 > /dbgfs/htc_battery/charger_state
427
428 echo 1024 > /dbgfs/micropklt_dbg/sleep_leds
429
430 if /bin/grep -c 'physkeyboard=fuze' /proc/cmdline >/dev/null ; then
431         echo "USING RAPH110|FUZE LAYOUT"
432         cp -f /init.etc/keymaps/fuze_microp-keypad.kcm.bin /etc/keymaps/microp-keypad.kcm.bin
433         cp -f /init.etc/keymaps/fuze_microp-keypad.kl /etc/keymaps/microp-keypad.kl
434         cp -f /init.etc/keymaps/fuze_raph_navi_pad.kl /etc/keymaps/raph_navi_pad.kl
435 elif /bin/grep -c 'physkeyboard=raph' /proc/cmdline >/dev/null ; then
436         echo "USING NEW RAPH LAYOUT"
437         cp -f /init.etc/keymaps/raphfix_microp-keypad.kcm.bin /etc/keymaps/microp-keypad.kcm.bin
438 elif /bin/grep -c 'physkeyboard=nordic_raph' /proc/cmdline >/dev/null ; then
439         echo "USING NEW NORDIC RAPH LAYOUT"
440         cp -f /init.etc/keymaps/raphfix_microp-keypad-swedish.kcm.bin /etc/keymaps/microp-keypad.kcm.bin
441 elif /bin/grep -c 'physkeyboard=german_raph' /proc/cmdline >/dev/null ; then
442         echo "USING NEW GERMAN RAPH LAYOUT"
443         cp -f /init.etc/keymaps/microp-german.keypad.kcm.bin /etc/keymaps/microp-keypad.kcm.bin
444 elif /bin/grep -c 'physkeyboard=swiss_raph' /proc/cmdline >/dev/null ; then
445         echo "USING NEW SWISS RAPH LAYOUT"
446         cp -f /init.etc/keymaps/microp-swiss.keypad.kcm.bin /etc/keymaps/microp-keypad.kcm.bin
447 elif /bin/grep -c 'physkeyboard=tilt2' /proc/cmdline >/dev/null ; then
448         echo "USING EXPERIMENTAL TILT2 LAYOUT"
449         cp -f /init.etc/keymaps/tilt2_microp-keypad.kl /etc/keymaps/microp-keypad.kl
450         cp -f /init.etc/keymaps/tilt2_microp-keypad.kcm.bin /etc/keymaps/microp-keypad.kcm.bin
451         cp -f /init.etc/keymaps/tilt2_navi_pad.kl /etc/keymaps/raph_navi_pad.kl
452 elif /bin/grep -c 'physkeyboard=rhod210' /proc/cmdline >/dev/null ; then
453         echo "USING EXPERIMENTAL RHOD210 LAYOUT"
454         cp -f /init.etc/keymaps/rhod210_microp-keypad.kl /etc/keymaps/microp-keypad.kl
455         cp -f /init.etc/keymaps/rhod210_microp-keypad.kcm.bin /etc/keymaps/microp-keypad.kcm.bin
456         cp -f /init.etc/keymaps/rhod210_navi_pad.kl /etc/keymaps/raph_navi_pad.kl
457 elif /bin/grep -c 'physkeyboard=rhod100_de' /proc/cmdline >/dev/null ; then
458         echo "USING RHOD100 DE LAYOUT"
459         cp -f /init.etc/keymaps/rhod100_de_microp-keypad.kl /etc/keymaps/microp-keypad.kl
460         cp -f /init.etc/keymaps/rhod100_de_microp-keypad.kcm.bin /etc/keymaps/microp-keypad.kcm.bin
461         cp -f /init.etc/keymaps/rhod100_de_navi_pad.kl /etc/keymaps/raph_navi_pad.kl
462 elif /bin/grep -c 'physkeyboard=rhod100_fr' /proc/cmdline >/dev/null ; then
463         echo "USING RHOD100 FR LAYOUT"
464         cp -f /init.etc/keymaps/rhod100_fr_microp-keypad.kl /etc/keymaps/microp-keypad.kl
465         cp -f /init.etc/keymaps/rhod100_fr_microp-keypad.kcm.bin /etc/keymaps/microp-keypad.kcm.bin
466         cp -f /init.etc/keymaps/rhod100_fr_navi_pad.kl /etc/keymaps/raph_navi_pad.kl
467 elif /bin/grep -c 'physkeyboard=rhod100_it' /proc/cmdline >/dev/null ; then
468         echo "USING RHOD100 IT LAYOUT"
469         cp -f /init.etc/keymaps/rhod100_it_microp-keypad.kl /etc/keymaps/microp-keypad.kl
470         cp -f /init.etc/keymaps/rhod100_it_microp-keypad.kcm.bin /etc/keymaps/microp-keypad.kcm.bin
471         cp -f /init.etc/keymaps/rhod100_it_navi_pad.kl /etc/keymaps/raph_navi_pad.kl
472 elif /bin/grep -c 'physkeyboard=rhod100_uk' /proc/cmdline >/dev/null ; then
473         echo "USING RHOD100 UK LAYOUT"
474         cp -f /init.etc/keymaps/rhod100_uk_microp-keypad.kl /etc/keymaps/microp-keypad.kl
475         cp -f /init.etc/keymaps/rhod100_uk_microp-keypad.kcm.bin /etc/keymaps/microp-keypad.kcm.bin
476         cp -f /init.etc/keymaps/rhod100_uk_navi_pad.kl /etc/keymaps/raph_navi_pad.kl
477 elif /bin/grep -c 'physkeyboard=rhod100_nordic' /proc/cmdline >/dev/null ; then
478         echo "USING RHOD100 NORDIC LAYOUT"
479         cp -f /init.etc/keymaps/rhod100_nordic_microp-keypad.kl /etc/keymaps/microp-keypad.kl
480         cp -f /init.etc/keymaps/rhod100_nordic_microp-keypad.kcm.bin /etc/keymaps/microp-keypad.kcm.bin
481         cp -f /init.etc/keymaps/rhod100_nordic_navi_pad.kl /etc/keymaps/raph_navi_pad.kl
482 elif /bin/grep -c 'physkeyboard=rhod400' /proc/cmdline >/dev/null ; then
483         echo "USING EXPERIMENTAL RHOD400 LAYOUT"
484         cp -f /init.etc/keymaps/rhod400_microp-keypad.kl /etc/keymaps/microp-keypad.kl
485         cp -f /init.etc/keymaps/rhod400_microp-keypad.kcm.bin /etc/keymaps/microp-keypad.kcm.bin
486         cp -f /init.etc/keymaps/rhod400_navi_pad.kl /etc/keymaps/raph_navi_pad.kl #does not exist, just following example
487 elif /bin/grep -c 'physkeyboard=rhod500' /proc/cmdline >/dev/null ; then
488         echo "USING EXPERIMENTAL RHOD500 LAYOUT"
489         cp -f /init.etc/keymaps/rhod500_microp-keypad.kl /etc/keymaps/microp-keypad.kl
490         cp -f /init.etc/keymaps/rhod500_microp-keypad.kcm.bin /etc/keymaps/microp-keypad.kcm.bin
491         cp -f /init.etc/keymaps/rhod500_navi_pad.kl /etc/keymaps/raph_navi_pad.kl #does not exist, just following example
492 elif /bin/grep -c 'physkeyboard=kovsq' /proc/cmdline >/dev/null ; then
493         echo "USING KOVSKY QWERTY LAYOUT"
494         cp -f /init.etc/keymaps/kovsky-qwerty.kl /etc/keymaps/microp-keypad.kl
495         cp -f /init.etc/keymaps/kovsky-qwerty.kcm.bin /etc/keymaps/microp-keypad.kcm.bin
496 elif /bin/grep -c 'physkeyboard=kovsa' /proc/cmdline >/dev/null; then
497         echo "USING KOVSKY AZERTY LAYOUT"
498         cp -f /init.etc/keymaps/kovsky-azerty.kl /etc/keymaps/microp-keypad.kl
499         cp -f /init.etc/keymaps/kovsky-azerty.kcm.bin /etc/keymaps/microp-keypad.kcm.bin
500 else
501         echo "USING OLD KEYMAP"
502         cp -f /init.etc/keymaps/oldqwerty_microp-keypad.kcm.bin /etc/keymaps/microp-keypad.kcm.bin
503         cp -f /init.etc/keymaps/oldqwerty_microp-keypad.kl /etc/keymaps/microp-keypad.kl
504         cp -f /init.etc/keymaps/oldqwerty_raph_navi_pad.kl /etc/keymaps/raph_navi_pad.kl
505 fi
506
507 cp -af /init.etc/keymaps/qwerty.kcm.bin /init.etc/keymaps/qwerty.kl /etc/keymaps/
508 mount --bind /etc/keymaps /system/usr/keychars
509 mount --bind /etc/keymaps /system/usr/keylayout
510
511 for i in /sys/class/input/input* ; do
512         if [ "`cat $i/name`" = "tssc-manager" ] ; then
513                 touchscreendir=$i
514                 echo "Touchscreen device directory is $i"
515         fi
516 done
517
518 if [ -f $card/ts-calibration ] ; then
519         echo "Using Saved Touchscreen Calibration"
520         echo 128,128,1903,128,128,1907,1903,1907,1024,1024 > $touchscreendir/calibration_screen
521         cat $card/ts-calibration > $touchscreendir/calibration_points
522 else
523         mkdir /dev/graphics
524         mknod /dev/graphics/fb0 c 29 0
525         clear
526         echo; echo; echo; echo; echo; echo; echo; echo "Calibrating Touchscreen:"
527         echo "Click the Five Targets in order -- Top Left, Top Right, Middle, Bottom Left, Bottom Right"
528         echo "(Tap lightly. The screen is quite sensitive.)"
529         tssc-calibrate
530         echo 0,0,0,0,0,0,0,0,0,0 | cmp -s $touchscreendir/calibration_points # determine if calibration is still null -- means failed calibration
531         if [ $? -eq 0 ] ; then
532                 echo "Touchscreen Calibration Failed"
533         else
534                 echo "Touchscreen Calibration Successful; Saving..."
535                 cat $touchscreendir/calibration_points > $card/ts-calibration
536         fi
537 fi
538
539 mkdir /dev/msm_camera
540 mknod /dev/msm_camera/control0 c 250 0
541 mknod /dev/msm_camera/config0 c 250 1
542 mknod /dev/msm_camera/frame0 c 250 2
543 chmod a+s /bin/pppd
544
545 # Generate a "serial number" for the Android system to identify the device.
546 # Put it in /data so it survives reboots. Won't survive a factory reset, though.
547 [ -f "/data/serialno" ] || echo -e `cat /dev/urandom | tr -dc 'A-Z0-9' | fold -w 12 | head -n 1` >/data/serialno
548
549 SERIALNO=$(cat /data/serialno)
550 cp /proc/cmdline /tmp/cmdline
551 sed -i -e "s:$: androidboot.serialno=${SERIALNO}:" /tmp/cmdline
552 mount --bind /tmp/cmdline /proc/cmdline
553
554 exec /init.android