schnitzeltony-oe-meta:meta-gumstix-community.git
4 years agoMerge branch 'master' of gitorious.org:schnitzeltony-oe-meta/meta-gumstix-community release-2013-06
Andreas Müller [Thu, 23 May 2013 07:21:28 +0000 (09:21 +0200)]
Merge branch 'master' of gitorious.org:schnitzeltony-oe-meta/meta-gumstix-community

4 years agolinux-omap-3.5: fix buffer overflow security hole
Andreas Müller [Thu, 23 May 2013 07:05:27 +0000 (09:05 +0200)]
linux-omap-3.5: fix buffer overflow security hole

thanks to Samuel Stirzel pointing on the patch

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
4 years agolinux-mainline-3.8: update to 3.8.12
Andreas Müller [Fri, 10 May 2013 17:19:07 +0000 (19:19 +0200)]
linux-mainline-3.8: update to 3.8.12

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
4 years agolinux-mainline-3.8: update to 3.8.8
Andreas Müller [Thu, 25 Apr 2013 16:41:21 +0000 (18:41 +0200)]
linux-mainline-3.8: update to 3.8.8

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
4 years agoremove linux versions which were never used or did not work properly
Andreas Müller [Mon, 22 Apr 2013 20:05:29 +0000 (22:05 +0200)]
remove linux versions which were never used or did not work properly

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
4 years agoREADME: fix typo in email address
Andreas Müller [Tue, 2 Apr 2013 09:05:00 +0000 (11:05 +0200)]
README: fix typo in email address

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
4 years agolinux-mainline-3.8: update to 3.8.5
Andreas Müller [Tue, 2 Apr 2013 07:31:05 +0000 (09:31 +0200)]
linux-mainline-3.8: update to 3.8.5

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
4 years agou-boot: rename to u-boot-overo
Andreas Müller [Mon, 1 Apr 2013 22:19:06 +0000 (00:19 +0200)]
u-boot: rename to u-boot-overo

meta-ti provides u-boot in some recipes now which causes warnings multiple
providers for u-boot.

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
4 years agolinux-mainline-3.8: update to 3.8.3
Andreas Müller [Fri, 15 Mar 2013 11:23:55 +0000 (12:23 +0100)]
linux-mainline-3.8: update to 3.8.3

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
4 years agolinux-mainline-3.8: update to 3.8.2
Andreas Müller [Mon, 4 Mar 2013 08:04:52 +0000 (09:04 +0100)]
linux-mainline-3.8: update to 3.8.2

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
4 years agolinux-mainline-3.8: add generic TWL reset / madc sequence
Andreas Müller [Sat, 2 Mar 2013 21:05:10 +0000 (22:05 +0100)]
linux-mainline-3.8: add generic TWL reset / madc sequence

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
4 years agolinux-mainline-3.8: don't set Host as OTG default
Andreas Müller [Sat, 2 Mar 2013 22:13:17 +0000 (23:13 +0100)]
linux-mainline-3.8: don't set Host as OTG default

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
4 years agolinux-mainline-3.8: defconfig remove unused SMC91X / PWM backlight
Andreas Müller [Tue, 26 Feb 2013 11:54:48 +0000 (12:54 +0100)]
linux-mainline-3.8: defconfig remove unused SMC91X / PWM backlight

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
4 years agolinux-mainline-3.8: update to 3.8.1
Andreas Müller [Thu, 28 Feb 2013 16:53:03 +0000 (17:53 +0100)]
linux-mainline-3.8: update to 3.8.1

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
4 years agolinux-mainline-3.8: remove patch applied mainline
Andreas Müller [Thu, 28 Feb 2013 16:15:28 +0000 (17:15 +0100)]
linux-mainline-3.8: remove patch applied mainline

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
4 years agolinux-omap-3.5: do not soft-reset EHCI USB PHY - it causes 1s boot delay
Andreas Müller [Thu, 28 Feb 2013 16:01:59 +0000 (17:01 +0100)]
linux-omap-3.5: do not soft-reset EHCI USB PHY - it causes 1s boot delay

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
4 years agolinux-mainline-3.8: do not soft-reset EHCI USB PHY - it causes 1s boot delay
Andreas Müller [Thu, 28 Feb 2013 15:50:30 +0000 (16:50 +0100)]
linux-mainline-3.8: do not soft-reset EHCI USB PHY - it causes 1s boot delay

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
4 years agolinux-mainline-3.8: enable TWL4030 power off
Andreas Müller [Thu, 28 Feb 2013 13:16:33 +0000 (14:16 +0100)]
linux-mainline-3.8: enable TWL4030 power off

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
4 years agolinux-mainline-3.8: disable USB suspend
Andreas Müller [Wed, 27 Feb 2013 14:36:51 +0000 (15:36 +0100)]
linux-mainline-3.8: disable USB suspend

some hubs are lost when no devices are connected

a good old friend - see fe09baad389e4e113fba363dc56ade2e7422210d

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
4 years agolinux-mainline-3.8: Add 720/800MHz OPP support
Andreas Müller [Wed, 27 Feb 2013 14:10:45 +0000 (15:10 +0100)]
linux-mainline-3.8: Add 720/800MHz OPP support

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
4 years agolinux-mainline-3.8: add AVS (Smartreflex) support
Andreas Müller [Tue, 26 Feb 2013 19:25:30 +0000 (20:25 +0100)]
linux-mainline-3.8: add AVS (Smartreflex) support

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
4 years agolinux-omap-3.5/-mainline-3.8: proper handling of missing network cable at boot
Andreas Müller [Tue, 26 Feb 2013 18:10:42 +0000 (19:10 +0100)]
linux-omap-3.5/-mainline-3.8: proper handling of missing network cable at boot

motivated by [1]

[1] http://marc.info/?l=linux-omap&m=133227294721813&w=2

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
4 years agocard-kernel-write.sh: make script work for renamed module tarballs
Andreas Müller [Tue, 26 Feb 2013 17:23:49 +0000 (18:23 +0100)]
card-kernel-write.sh: make script work for renamed module tarballs

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
4 years agolinux-mainline-3.8: defconfig alignment
Andreas Müller [Tue, 26 Feb 2013 02:03:47 +0000 (03:03 +0100)]
linux-mainline-3.8: defconfig alignment

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
4 years agolinux-mainline-3.8: add OMAP USB Host cleanup series
Andreas Müller [Mon, 25 Feb 2013 22:17:26 +0000 (23:17 +0100)]
linux-mainline-3.8: add OMAP USB Host cleanup series

as long as this series is not in stable branch, fix it here

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
4 years agolinux-versions-overo.inc: linux-mainline-3.8 move to stable branch
Andreas Müller [Mon, 25 Feb 2013 14:34:25 +0000 (15:34 +0100)]
linux-versions-overo.inc: linux-mainline-3.8 move to stable branch

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
4 years agolinux-mainline-3.8: remove unused sgx patch
Andreas Müller [Fri, 22 Feb 2013 11:49:50 +0000 (12:49 +0100)]
linux-mainline-3.8: remove unused sgx patch

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
4 years agolinux-mainline-3.8: Make it build
Andreas Müller [Thu, 21 Feb 2013 17:32:57 +0000 (18:32 +0100)]
linux-mainline-3.8: Make it build

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
5 years agolinux-versions-overo.inc: set linux-mainline-3.8 to 3.8.0
Andreas Müller [Wed, 20 Feb 2013 12:10:25 +0000 (13:10 +0100)]
linux-versions-overo.inc: set linux-mainline-3.8 to 3.8.0

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
5 years agou-boot-variables: correct screensaver setting / add journalctl to console
Andreas Müller [Thu, 14 Feb 2013 12:17:27 +0000 (13:17 +0100)]
u-boot-variables: correct screensaver setting / add journalctl to console

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
5 years agoovero.conf: remove omap3-sgx-modules
Andreas Müller [Wed, 13 Feb 2013 15:21:29 +0000 (16:21 +0100)]
overo.conf: remove omap3-sgx-modules

* they are useles without libgles
* libgles should be pulled in by virtual/*gl*

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
5 years agoCard tools: ignore empty card reader slots
Samuel Stirtzel [Tue, 12 Feb 2013 12:04:47 +0000 (13:04 +0100)]
Card tools: ignore empty card reader slots

Some card readers register devices even for empty slots making it hard to find the right one.
With this patch only the filled slots will be shown in the device selection.

Signed-off-by: Samuel Stirtzel <s.stirtzel@googlemail.com>
5 years agolinux.inc: restore linux drivers/gpu/drm/*.c for X11 part of omap3-sgx-modules
Andreas Müller [Thu, 7 Feb 2013 17:56:10 +0000 (18:56 +0100)]
linux.inc: restore linux drivers/gpu/drm/*.c for X11 part of omap3-sgx-modules

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
5 years agolinux-common.inc: avoid cheanging meta-ti SRCREV
Andreas Müller [Thu, 7 Feb 2013 08:08:11 +0000 (09:08 +0100)]
linux-common.inc: avoid cheanging meta-ti SRCREV

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
5 years agoMerge branch 'master' of gitorious.org:schnitzeltony-oe-meta/meta-gumstix-community
Andreas Müller [Thu, 7 Feb 2013 07:35:33 +0000 (08:35 +0100)]
Merge branch 'master' of gitorious.org:schnitzeltony-oe-meta/meta-gumstix-community

5 years agolinux-mainline_3.2: PV don't conflict with meta-ti
Andreas Müller [Thu, 7 Feb 2013 07:34:35 +0000 (08:34 +0100)]
linux-mainline_3.2: PV don't conflict with meta-ti

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
5 years agocard-*.sh: force to bash / align copyright
Andreas Müller [Wed, 6 Feb 2013 12:06:57 +0000 (13:06 +0100)]
card-*.sh: force to bash / align copyright

5 years agou-boot-variables: fix consoleblank entry
Andreas Müller [Wed, 6 Feb 2013 12:05:01 +0000 (13:05 +0100)]
u-boot-variables: fix consoleblank entry

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
5 years agou-boot: Add consoleblank=0 to default parameters to avoid screensaver
Andreas Müller [Wed, 6 Feb 2013 12:03:48 +0000 (13:03 +0100)]
u-boot: Add consoleblank=0 to default parameters to avoid screensaver

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
5 years agoovero.conf: replace libgles-omap3 by omap3-sgx-modules
Andreas Müller [Fri, 25 Jan 2013 11:09:50 +0000 (12:09 +0100)]
overo.conf: replace libgles-omap3 by omap3-sgx-modules

powervr init service lasts...

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
5 years agou-boot-variables: add consoleblank
Andreas Müller [Fri, 25 Jan 2013 11:09:07 +0000 (12:09 +0100)]
u-boot-variables: add consoleblank

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
5 years agolinux-mainline-3.8: remove multiline comments
Andreas Müller [Wed, 23 Jan 2013 07:40:51 +0000 (08:40 +0100)]
linux-mainline-3.8: remove multiline comments

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
5 years agolinux-mainline-3.8: prepare latest kernel
Andreas Müller [Fri, 11 Jan 2013 07:29:57 +0000 (08:29 +0100)]
linux-mainline-3.8: prepare latest kernel

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
5 years agolinux-versions-overo.inc: location of sakoman linux git has changed
Andreas Müller [Thu, 10 Jan 2013 15:34:39 +0000 (16:34 +0100)]
linux-versions-overo.inc: location of sakoman linux git has changed

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
5 years agolinux-omap-3.6: remove
Andreas Müller [Thu, 10 Jan 2013 12:39:10 +0000 (13:39 +0100)]
linux-omap-3.6: remove

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
5 years agoremove linux-libc-headers
Andreas Müller [Mon, 7 Jan 2013 21:39:50 +0000 (22:39 +0100)]
remove linux-libc-headers

In case of mismatch distro / available the dynamic framework causes strange
effects.

5 years agolayer.conf: prepare auto-appending layers
Andreas Müller [Wed, 2 Jan 2013 00:20:47 +0000 (01:20 +0100)]
layer.conf: prepare auto-appending layers

taken from meta-systemd [1]

[1] http://cgit.openembedded.org/meta-openembedded/commit/?id=3c21a46020bd0816579648f684c41dbd6333583e

5 years agolayer.conf: replace meta-gumstix by meta-gumstix-community
Andreas Müller [Wed, 2 Jan 2013 00:19:58 +0000 (01:19 +0100)]
layer.conf: replace meta-gumstix by meta-gumstix-community

5 years agocard-kernel-write.sh: fix typo
Andreas Müller [Tue, 1 Jan 2013 23:04:06 +0000 (00:04 +0100)]
card-kernel-write.sh: fix typo

5 years agoREADME: update meta-ti dependency information
Andreas Müller [Tue, 1 Jan 2013 23:03:18 +0000 (00:03 +0100)]
README: update meta-ti dependency information

5 years agolinux-*: meta-oe's kernel.bbclass is gone ensure proper PRBump
Andreas Müller [Fri, 30 Nov 2012 18:56:50 +0000 (19:56 +0100)]
linux-*: meta-oe's kernel.bbclass is gone ensure proper PRBump

MACHINE_KERNEL_PR was removed - I never understood that...

5 years agolinux-mainline-3.6: update 3.6.6
Andreas Müller [Mon, 5 Nov 2012 14:27:45 +0000 (15:27 +0100)]
linux-mainline-3.6: update 3.6.6

5 years agolinux-mainline-3.6: ensure vsynch isr registering
Andreas Müller [Mon, 22 Oct 2012 06:06:52 +0000 (08:06 +0200)]
linux-mainline-3.6: ensure vsynch isr registering

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
5 years agolinux-mainline-3.6: update to 3.6.3
Andreas Müller [Sun, 21 Oct 2012 18:30:26 +0000 (20:30 +0200)]
linux-mainline-3.6: update to 3.6.3

5 years agolinux-mainline-3.6: update to 3.6.2 / patch cleanup / linux-mainline-3.6 / remove...
Andreas Müller [Sat, 13 Oct 2012 00:26:03 +0000 (02:26 +0200)]
linux-mainline-3.6: update to 3.6.2 / patch cleanup / linux-mainline-3.6 / remove CONFIG_ARCH_OMAP_OTG

5 years agou-boot-variables: Undo last changes on lcd43 dvimode
Andreas Müller [Thu, 11 Oct 2012 13:12:14 +0000 (15:12 +0200)]
u-boot-variables: Undo last changes on lcd43 dvimode

5 years agolinux-mainline: initial add 3.6.1
Andreas Müller [Mon, 8 Oct 2012 00:47:17 +0000 (02:47 +0200)]
linux-mainline: initial add 3.6.1

5 years agou-boot-variables: change timings for lcd43 to avoid wrong pixels in first line
Andreas Müller [Thu, 4 Oct 2012 07:59:29 +0000 (09:59 +0200)]
u-boot-variables: change timings for lcd43 to avoid wrong pixels in first line

5 years agolinux-omap-3.5: disable USB suspend
Andreas Müller [Thu, 27 Sep 2012 15:15:41 +0000 (17:15 +0200)]
linux-omap-3.5: disable USB suspend

some hubs are lost when no devices are connected

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
5 years agolinux: restructure recipe names to avoid PREFERRED_VERSION mess
Andreas Müller [Thu, 27 Sep 2012 14:46:55 +0000 (16:46 +0200)]
linux: restructure recipe names to avoid PREFERRED_VERSION mess

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
5 years agolinux-omap-3.6: move to rc7
Andreas Müller [Wed, 26 Sep 2012 16:01:27 +0000 (18:01 +0200)]
linux-omap-3.6: move to rc7

5 years agolinux-versions-overo.inc: 3.6-rc4 -> 3.6-rc6
Andreas Müller [Mon, 17 Sep 2012 06:57:31 +0000 (08:57 +0200)]
linux-versions-overo.inc: 3.6-rc4 -> 3.6-rc6

5 years agolinux-omap-3.5 / mmc: add sdio interrupt support
Andreas Müller [Sat, 15 Sep 2012 00:08:57 +0000 (02:08 +0200)]
linux-omap-3.5 / mmc: add sdio interrupt support

5 years agolinux-omap: ADS7846 dejitter / unthrottle
Andreas Müller [Fri, 14 Sep 2012 22:46:47 +0000 (00:46 +0200)]
linux-omap: ADS7846 dejitter / unthrottle

5 years agocard-kernel-write.sh: new helper script to write only kernel+modules to SDCard
Andreas Müller [Mon, 10 Sep 2012 11:16:28 +0000 (13:16 +0200)]
card-kernel-write.sh: new helper script to write only kernel+modules to SDCard

5 years agolinux-3.5: ads7846/smsc911x return ENODEV if no device found
Andreas Müller [Sun, 9 Sep 2012 10:21:56 +0000 (12:21 +0200)]
linux-3.5: ads7846/smsc911x return ENODEV if no device found

5 years agolinux-3.6: smsc911x return ENODEV if no device found
Andreas Müller [Sun, 9 Sep 2012 10:20:37 +0000 (12:20 +0200)]
linux-3.6: smsc911x return ENODEV if no device found

5 years agoscript-and-docs/u-boot-variables: add video params for dvi/lcd43
Andreas Müller [Sun, 9 Sep 2012 10:16:27 +0000 (12:16 +0200)]
script-and-docs/u-boot-variables: add video params for dvi/lcd43

5 years agolinux-3.5: move back to governor performance / storm max freq. 800MHz
Andreas Müller [Sat, 8 Sep 2012 00:13:11 +0000 (02:13 +0200)]
linux-3.5: move back to governor performance / storm max freq. 800MHz

5 years agoovero.conf: reenable xf86-input-tslib
Andreas Müller [Fri, 7 Sep 2012 11:03:59 +0000 (13:03 +0200)]
overo.conf: reenable xf86-input-tslib

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
5 years agolinux-omap-3.6: move rc4 to fix ADS7876 always pendown
Andreas Müller [Fri, 7 Sep 2012 11:01:40 +0000 (13:01 +0200)]
linux-omap-3.6: move rc4 to fix ADS7876 always pendown

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
5 years agolinux-libc-headers: make dynamic version switching optional
Andreas Müller [Thu, 6 Sep 2012 16:41:23 +0000 (18:41 +0200)]
linux-libc-headers: make dynamic version switching optional

5 years agolinux: take also linux-mainline under control of linux-versions-overo.inc + cosmetics
Andreas Müller [Thu, 6 Sep 2012 14:15:57 +0000 (16:15 +0200)]
linux: take also linux-mainline under control of linux-versions-overo.inc + cosmetics

5 years agolinux-sakoman: rename variables / set correct version
Andreas Müller [Thu, 6 Sep 2012 07:14:09 +0000 (09:14 +0200)]
linux-sakoman: rename variables / set correct version

5 years agolinux: put PV in linux-recipes to fix building wrong recipes
Andreas Müller [Thu, 6 Sep 2012 06:50:03 +0000 (08:50 +0200)]
linux: put PV in linux-recipes to fix building wrong recipes

5 years agolinux configuration: restructure
Andreas Müller [Wed, 5 Sep 2012 13:27:19 +0000 (15:27 +0200)]
linux configuration: restructure

* add linux-libc-headers based on the same source as kernel
* switch kernels / update git in linux-versions-overo.inc
* keep splash screens only once

5 years agolinux-3.0: remove
Andreas Müller [Wed, 5 Sep 2012 09:26:07 +0000 (11:26 +0200)]
linux-3.0: remove

5 years agoovero-storm.conf: remove - there is no need for extra configuration
Andreas Müller [Wed, 5 Sep 2012 09:20:41 +0000 (11:20 +0200)]
overo-storm.conf: remove - there is no need for extra configuration

5 years agolinux-omap-3.6: Do not register ADS7846 if not present
Andreas Müller [Tue, 4 Sep 2012 23:53:03 +0000 (01:53 +0200)]
linux-omap-3.6: Do not register ADS7846 if not present

5 years agoomap3-sgx-modules: FILESEXTRAPATHS -> FILESEXTRAPATHS_prepend
Andreas Müller [Tue, 4 Sep 2012 12:21:20 +0000 (14:21 +0200)]
omap3-sgx-modules: FILESEXTRAPATHS -> FILESEXTRAPATHS_prepend

5 years agolinux-omap-3.6: disable smartreflex / gouvernor performance
Andreas Müller [Fri, 31 Aug 2012 11:09:43 +0000 (13:09 +0200)]
linux-omap-3.6: disable smartreflex / gouvernor performance

* smartreflex: caused performace loss
* gouvernor ondemand could not be rebooted/resetted
* gouvernor performance @1GHz caused overheating

5 years agolinux-3.6: fix ADS7846 backtrace
Andreas Müller [Thu, 30 Aug 2012 16:09:47 +0000 (18:09 +0200)]
linux-3.6: fix ADS7846 backtrace

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
5 years agolinux-omap-3.6: reenable 1GHz / enable smartreflex
Andreas Müller [Thu, 30 Aug 2012 13:22:05 +0000 (15:22 +0200)]
linux-omap-3.6: reenable 1GHz / enable smartreflex

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
5 years agolinux-omap-3.5: reenable 1GHz / use ondemand governor / enable smartreflex
Andreas Müller [Thu, 30 Aug 2012 13:14:34 +0000 (15:14 +0200)]
linux-omap-3.5: reenable 1GHz / use ondemand governor / enable smartreflex

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
5 years agolinux-omap-3.6: Initial add
Andreas Müller [Wed, 29 Aug 2012 23:32:55 +0000 (01:32 +0200)]
linux-omap-3.6: Initial add

since OMAP DMA engine got lost somwhere after 3.5-rc6 and it was not possible
to re-patch, start following 3.6.

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
5 years agou-boot: move to 2012.07
Andreas Müller [Thu, 30 Aug 2012 13:00:55 +0000 (15:00 +0200)]
u-boot: move to 2012.07

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
5 years agolinux-omap-3.5: fix 800MHz corrupted by last commit
Andreas Müller [Wed, 29 Aug 2012 15:00:07 +0000 (17:00 +0200)]
linux-omap-3.5: fix 800MHz corrupted by last commit

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
5 years agolinux-omap-3.5: Follow Gumstix suggestion to have max 800MHz [1]
Andreas Müller [Wed, 29 Aug 2012 13:12:59 +0000 (15:12 +0200)]
linux-omap-3.5: Follow Gumstix suggestion to have max 800MHz [1]

https://www.gumstix.com/store/product_info.php?products_id=267

5 years agolinux-omap-3.5: Add opp table support
Andreas Müller [Wed, 29 Aug 2012 12:04:54 +0000 (14:04 +0200)]
linux-omap-3.5: Add opp table support

grabbed from sakoman's 3.5 kernel [1]

[1] http://www.sakoman.com/cgi-bin/gitweb.cgi?p=linux-omap-2.6.git;a=shortlog;h=refs/heads/omap-3.5

5 years agoovero.inc: add udev-udisks-rules-overo to MACHINE_EXTRA_RRECOMMENDS
Andreas Müller [Tue, 28 Aug 2012 13:57:41 +0000 (15:57 +0200)]
overo.inc: add udev-udisks-rules-overo to MACHINE_EXTRA_RRECOMMENDS

5 years agoudev-udisks-rules-overo: add udev rule to hide boot partition to udisks
Andreas Müller [Tue, 28 Aug 2012 13:55:35 +0000 (15:55 +0200)]
udev-udisks-rules-overo: add udev rule to hide boot partition to udisks

5 years agoovero.inc: move to linux-omap-3.5
Andreas Müller [Fri, 24 Aug 2012 08:40:11 +0000 (10:40 +0200)]
overo.inc: move to linux-omap-3.5

5 years agoOMAPFB: fix framebuffer console colors for resolutions > 16bpp
Andreas Müller [Fri, 17 Aug 2012 11:37:43 +0000 (13:37 +0200)]
OMAPFB: fix framebuffer console colors for resolutions > 16bpp

5 years agolinux-omap: fix race during install
Andreas Müller [Thu, 16 Aug 2012 09:42:29 +0000 (11:42 +0200)]
linux-omap: fix race during install

5 years agolinux-omap: cleanup
Andreas Müller [Thu, 16 Aug 2012 09:40:48 +0000 (11:40 +0200)]
linux-omap: cleanup

5 years agoomap3-sgx-modules: Fix crashes for overo storm COMs
Andreas Müller [Mon, 13 Aug 2012 17:47:25 +0000 (19:47 +0200)]
omap3-sgx-modules: Fix crashes for overo storm COMs

5 years agolinux-firmware: new append so that a later version of firmware (sd8686-9.70.20.p0...
Andreas Müller [Mon, 13 Aug 2012 13:28:26 +0000 (15:28 +0200)]
linux-firmware: new append so that a later version of firmware (sd8686-9.70.20.p0.bin) is used

5 years agolinux-omap: Fix USB EHCI (was broken at transition to 3.5)
Andreas Müller [Mon, 13 Aug 2012 14:44:07 +0000 (16:44 +0200)]
linux-omap: Fix USB EHCI (was broken at transition to 3.5)

5 years agolinux-omap: update to v3.5
Andreas Müller [Fri, 10 Aug 2012 13:47:41 +0000 (15:47 +0200)]
linux-omap: update to v3.5

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
5 years agoovero.inc: Use the linux-firmware-sd8686 instead of marvell-sdio-fw_9.70.3-p37.bb
Samuel Stirtzel [Mon, 6 Aug 2012 08:20:29 +0000 (10:20 +0200)]
overo.inc: Use the linux-firmware-sd8686 instead of marvell-sdio-fw_9.70.3-p37.bb

They should be identic so the marvell-sdio-fw_9.70.3-p37.bb is redundant.
Also deletes the marvell-sdio-fw_9.70.3-p37.bb files.

Signed-off-by: Samuel Stirtzel <s.stirtzel@googlemail.com>
Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>