run arm_pci_init after relocation
[pandaboard:cader1s-u-boot-mainline.git] / Makefile
1 #
2 # (C) Copyright 2000-2010
3 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4 #
5 # See file CREDITS for list of people who contributed to this
6 # project.
7 #
8 # This program is free software; you can redistribute it and/or
9 # modify it under the terms of the GNU General Public License as
10 # published by the Free Software Foundatio; either version 2 of
11 # the License, or (at your option) any later version.
12 #
13 # This program is distributed in the hope that it will be useful,
14 # but WITHOUT ANY WARRANTY; without even the implied warranty of
15 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16 # GNU General Public License for more details.
17 #
18 # You should have received a copy of the GNU General Public License
19 # along with this program; if not, write to the Free Software
20 # Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 # MA 02111-1307 USA
22 #
23
24 VERSION = 2011
25 PATCHLEVEL = 06
26 SUBLEVEL =
27 EXTRAVERSION = -rc3
28 ifneq "$(SUBLEVEL)" ""
29 U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
30 else
31 U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL)$(EXTRAVERSION)
32 endif
33 TIMESTAMP_FILE = $(obj)include/timestamp_autogenerated.h
34 VERSION_FILE = $(obj)include/version_autogenerated.h
35
36 HOSTARCH := $(shell uname -m | \
37         sed -e s/i.86/x86/ \
38             -e s/sun4u/sparc64/ \
39             -e s/arm.*/arm/ \
40             -e s/sa110/arm/ \
41             -e s/ppc64/powerpc/ \
42             -e s/ppc/powerpc/ \
43             -e s/macppc/powerpc/\
44             -e s/sh.*/sh/)
45
46 HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
47             sed -e 's/\(cygwin\).*/cygwin/')
48
49 # Set shell to bash if possible, otherwise fall back to sh
50 SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
51         else if [ -x /bin/bash ]; then echo /bin/bash; \
52         else echo sh; fi; fi)
53
54 export  HOSTARCH HOSTOS SHELL
55
56 # Deal with colliding definitions from tcsh etc.
57 VENDOR=
58
59 #########################################################################
60 # Allow for silent builds
61 ifeq (,$(findstring s,$(MAKEFLAGS)))
62 XECHO = echo
63 else
64 XECHO = :
65 endif
66
67 #########################################################################
68 #
69 # U-boot build supports producing a object files to the separate external
70 # directory. Two use cases are supported:
71 #
72 # 1) Add O= to the make command line
73 # 'make O=/tmp/build all'
74 #
75 # 2) Set environement variable BUILD_DIR to point to the desired location
76 # 'export BUILD_DIR=/tmp/build'
77 # 'make'
78 #
79 # The second approach can also be used with a MAKEALL script
80 # 'export BUILD_DIR=/tmp/build'
81 # './MAKEALL'
82 #
83 # Command line 'O=' setting overrides BUILD_DIR environent variable.
84 #
85 # When none of the above methods is used the local build is performed and
86 # the object files are placed in the source directory.
87 #
88
89 ifdef O
90 ifeq ("$(origin O)", "command line")
91 BUILD_DIR := $(O)
92 endif
93 endif
94
95 ifneq ($(BUILD_DIR),)
96 saved-output := $(BUILD_DIR)
97
98 # Attempt to create a output directory.
99 $(shell [ -d ${BUILD_DIR} ] || mkdir -p ${BUILD_DIR})
100
101 # Verify if it was successful.
102 BUILD_DIR := $(shell cd $(BUILD_DIR) && /bin/pwd)
103 $(if $(BUILD_DIR),,$(error output directory "$(saved-output)" does not exist))
104 endif # ifneq ($(BUILD_DIR),)
105
106 OBJTREE         := $(if $(BUILD_DIR),$(BUILD_DIR),$(CURDIR))
107 SRCTREE         := $(CURDIR)
108 TOPDIR          := $(SRCTREE)
109 LNDIR           := $(OBJTREE)
110 export  TOPDIR SRCTREE OBJTREE
111
112 MKCONFIG        := $(SRCTREE)/mkconfig
113 export MKCONFIG
114
115 ifneq ($(OBJTREE),$(SRCTREE))
116 REMOTE_BUILD    := 1
117 export REMOTE_BUILD
118 endif
119
120 # $(obj) and (src) are defined in config.mk but here in main Makefile
121 # we also need them before config.mk is included which is the case for
122 # some targets like unconfig, clean, clobber, distclean, etc.
123 ifneq ($(OBJTREE),$(SRCTREE))
124 obj := $(OBJTREE)/
125 src := $(SRCTREE)/
126 else
127 obj :=
128 src :=
129 endif
130 export obj src
131
132 # Make sure CDPATH settings don't interfere
133 unexport CDPATH
134
135 #########################################################################
136
137 # The "tools" are needed early, so put this first
138 # Don't include stuff already done in $(LIBS)
139 SUBDIRS = tools \
140           examples/standalone \
141           examples/api
142
143 .PHONY : $(SUBDIRS)
144
145 ifeq ($(obj)include/config.mk,$(wildcard $(obj)include/config.mk))
146
147 # Include autoconf.mk before config.mk so that the config options are available
148 # to all top level build files.  We need the dummy all: target to prevent the
149 # dependency target in autoconf.mk.dep from being the default.
150 all:
151 sinclude $(obj)include/autoconf.mk.dep
152 sinclude $(obj)include/autoconf.mk
153
154 # load ARCH, BOARD, and CPU configuration
155 include $(obj)include/config.mk
156 export  ARCH CPU BOARD VENDOR SOC
157
158 # set default to nothing for native builds
159 ifeq ($(HOSTARCH),$(ARCH))
160 CROSS_COMPILE ?=
161 endif
162
163 # load other configuration
164 include $(TOPDIR)/config.mk
165
166 #########################################################################
167 # U-Boot objects....order is important (i.e. start must be first)
168
169 OBJS  = $(CPUDIR)/start.o
170 ifeq ($(CPU),x86)
171 OBJS += $(CPUDIR)/start16.o
172 OBJS += $(CPUDIR)/resetvec.o
173 endif
174 ifeq ($(CPU),ppc4xx)
175 OBJS += $(CPUDIR)/resetvec.o
176 endif
177 ifeq ($(CPU),mpc85xx)
178 OBJS += $(CPUDIR)/resetvec.o
179 endif
180
181 OBJS := $(addprefix $(obj),$(OBJS))
182
183 LIBS  = lib/libgeneric.o
184 LIBS += lib/lzma/liblzma.o
185 LIBS += lib/lzo/liblzo.o
186 LIBS += lib/zlib/libz.o
187 LIBS += $(shell if [ -f board/$(VENDOR)/common/Makefile ]; then echo \
188         "board/$(VENDOR)/common/lib$(VENDOR).o"; fi)
189 LIBS += $(CPUDIR)/lib$(CPU).o
190 ifdef SOC
191 LIBS += $(CPUDIR)/$(SOC)/lib$(SOC).o
192 endif
193 ifeq ($(CPU),ixp)
194 LIBS += arch/arm/cpu/ixp/npe/libnpe.o
195 endif
196 LIBS += arch/$(ARCH)/lib/lib$(ARCH).o
197 LIBS += fs/cramfs/libcramfs.o fs/fat/libfat.o fs/fdos/libfdos.o fs/jffs2/libjffs2.o \
198         fs/reiserfs/libreiserfs.o fs/ext2/libext2fs.o fs/yaffs2/libyaffs2.o \
199         fs/ubifs/libubifs.o
200 LIBS += net/libnet.o
201 LIBS += disk/libdisk.o
202 LIBS += drivers/bios_emulator/libatibiosemu.o
203 LIBS += drivers/block/libblock.o
204 LIBS += drivers/dma/libdma.o
205 LIBS += drivers/fpga/libfpga.o
206 LIBS += drivers/gpio/libgpio.o
207 LIBS += drivers/hwmon/libhwmon.o
208 LIBS += drivers/i2c/libi2c.o
209 LIBS += drivers/input/libinput.o
210 LIBS += drivers/misc/libmisc.o
211 LIBS += drivers/mmc/libmmc.o
212 LIBS += drivers/mtd/libmtd.o
213 LIBS += drivers/mtd/nand/libnand.o
214 LIBS += drivers/mtd/onenand/libonenand.o
215 LIBS += drivers/mtd/ubi/libubi.o
216 LIBS += drivers/mtd/spi/libspi_flash.o
217 LIBS += drivers/net/libnet.o
218 LIBS += drivers/net/phy/libphy.o
219 LIBS += drivers/pci/libpci.o
220 LIBS += drivers/pcmcia/libpcmcia.o
221 LIBS += drivers/power/libpower.o
222 LIBS += drivers/spi/libspi.o
223 ifeq ($(CPU),mpc83xx)
224 LIBS += drivers/qe/libqe.o
225 LIBS += arch/powerpc/cpu/mpc8xxx/lib8xxx.o
226 endif
227 ifeq ($(CPU),mpc85xx)
228 LIBS += drivers/qe/libqe.o
229 LIBS += arch/powerpc/cpu/mpc8xxx/ddr/libddr.o
230 LIBS += arch/powerpc/cpu/mpc8xxx/lib8xxx.o
231 endif
232 ifeq ($(CPU),mpc86xx)
233 LIBS += arch/powerpc/cpu/mpc8xxx/ddr/libddr.o
234 LIBS += arch/powerpc/cpu/mpc8xxx/lib8xxx.o
235 endif
236 LIBS += drivers/rtc/librtc.o
237 LIBS += drivers/serial/libserial.o
238 LIBS += drivers/twserial/libtws.o
239 LIBS += drivers/usb/eth/libusb_eth.a
240 LIBS += drivers/usb/gadget/libusb_gadget.o
241 LIBS += drivers/usb/host/libusb_host.o
242 LIBS += drivers/usb/musb/libusb_musb.o
243 LIBS += drivers/usb/phy/libusb_phy.o
244 LIBS += drivers/video/libvideo.o
245 LIBS += drivers/watchdog/libwatchdog.o
246 LIBS += common/libcommon.o
247 LIBS += lib/libfdt/libfdt.o
248 LIBS += api/libapi.o
249 LIBS += post/libpost.o
250
251 ifeq ($(SOC),omap3)
252 LIBS += $(CPUDIR)/omap-common/libomap-common.o
253 endif
254 ifeq ($(SOC),omap4)
255 LIBS += $(CPUDIR)/omap-common/libomap-common.o
256 endif
257
258 ifeq ($(SOC),s5pc1xx)
259 LIBS += $(CPUDIR)/s5p-common/libs5p-common.o
260 endif
261 ifeq ($(SOC),s5pc2xx)
262 LIBS += $(CPUDIR)/s5p-common/libs5p-common.o
263 endif
264
265 LIBS := $(addprefix $(obj),$(sort $(LIBS)))
266 .PHONY : $(LIBS) $(TIMESTAMP_FILE) $(VERSION_FILE)
267
268 LIBBOARD = board/$(BOARDDIR)/lib$(BOARD).o
269 LIBBOARD := $(addprefix $(obj),$(LIBBOARD))
270
271 # Add GCC lib
272 ifdef USE_PRIVATE_LIBGCC
273 ifeq ("$(USE_PRIVATE_LIBGCC)", "yes")
274 PLATFORM_LIBGCC = $(OBJTREE)/arch/$(ARCH)/lib/libgcc.o
275 else
276 PLATFORM_LIBGCC = -L $(USE_PRIVATE_LIBGCC) -lgcc
277 endif
278 else
279 PLATFORM_LIBGCC = -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc
280 endif
281 PLATFORM_LIBS += $(PLATFORM_LIBGCC)
282 export PLATFORM_LIBS
283
284 # Special flags for CPP when processing the linker script.
285 # Pass the version down so we can handle backwards compatibility
286 # on the fly.
287 LDPPFLAGS += \
288         -include $(TOPDIR)/include/u-boot/u-boot.lds.h \
289         $(shell $(LD) --version | \
290           sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
291
292 __OBJS := $(subst $(obj),,$(OBJS))
293 __LIBS := $(subst $(obj),,$(LIBS)) $(subst $(obj),,$(LIBBOARD))
294
295 #########################################################################
296 #########################################################################
297
298 ifneq ($(CONFIG_BOARD_SIZE_LIMIT),)
299 BOARD_SIZE_CHECK = \
300         @actual=`wc -c $@ | awk '{print $$1}'`; \
301         limit=$(CONFIG_BOARD_SIZE_LIMIT); \
302         if test $$actual -gt $$limit; then \
303                 echo "$@ exceeds file size limit:"; \
304                 echo "  limit:  $$limit bytes"; \
305                 echo "  actual: $$actual bytes"; \
306                 echo "  excess: $$((actual - limit)) bytes"; \
307                 exit 1; \
308         fi
309 else
310 BOARD_SIZE_CHECK =
311 endif
312
313 # Always append ALL so that arch config.mk's can add custom ones
314 ALL += $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map
315
316 ifeq ($(CONFIG_NAND_U_BOOT),y)
317 ALL += $(obj)u-boot-nand.bin
318 endif
319
320 ifeq ($(CONFIG_ONENAND_U_BOOT),y)
321 ALL += $(obj)u-boot-onenand.bin
322 ONENAND_BIN ?= $(obj)onenand_ipl/onenand-ipl-2k.bin
323 endif
324
325 ifeq ($(CONFIG_MMC_U_BOOT),y)
326 ALL += $(obj)mmc_spl/u-boot-mmc-spl.bin
327 endif
328
329 all:            $(ALL)
330
331 $(obj)u-boot.hex:       $(obj)u-boot
332                 $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@
333
334 $(obj)u-boot.srec:      $(obj)u-boot
335                 $(OBJCOPY) -O srec $< $@
336
337 $(obj)u-boot.bin:       $(obj)u-boot
338                 $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
339                 $(BOARD_SIZE_CHECK)
340
341 $(obj)u-boot.ldr:       $(obj)u-boot
342                 $(CREATE_LDR_ENV)
343                 $(LDR) -T $(CONFIG_BFIN_CPU) -c $@ $< $(LDR_FLAGS)
344                 $(BOARD_SIZE_CHECK)
345
346 $(obj)u-boot.ldr.hex:   $(obj)u-boot.ldr
347                 $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@ -I binary
348
349 $(obj)u-boot.ldr.srec:  $(obj)u-boot.ldr
350                 $(OBJCOPY) ${OBJCFLAGS} -O srec $< $@ -I binary
351
352 $(obj)u-boot.img:       $(obj)u-boot.bin
353                 $(obj)tools/mkimage -A $(ARCH) -T firmware -C none \
354                 -a $(CONFIG_SYS_TEXT_BASE) -e 0 \
355                 -n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' $(VERSION_FILE) | \
356                         sed -e 's/"[     ]*$$/ for $(BOARD) board"/') \
357                 -d $< $@
358
359 $(obj)u-boot.imx:       $(obj)u-boot.bin
360                 $(obj)tools/mkimage -n  $(CONFIG_IMX_CONFIG) -T imximage \
361                 -e $(CONFIG_SYS_TEXT_BASE) -d $< $@
362
363 $(obj)u-boot.kwb:       $(obj)u-boot.bin
364                 $(obj)tools/mkimage -n $(CONFIG_SYS_KWD_CONFIG) -T kwbimage \
365                 -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) -d $< $@
366
367 $(obj)u-boot.sha1:      $(obj)u-boot.bin
368                 $(obj)tools/ubsha1 $(obj)u-boot.bin
369
370 $(obj)u-boot.dis:       $(obj)u-boot
371                 $(OBJDUMP) -d $< > $@
372
373 GEN_UBOOT = \
374                 UNDEF_SYM=`$(OBJDUMP) -x $(LIBBOARD) $(LIBS) | \
375                 sed  -n -e 's/.*\($(SYM_PREFIX)__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\
376                 cd $(LNDIR) && $(LD) $(LDFLAGS) $(LDFLAGS_$(@F)) $$UNDEF_SYM $(__OBJS) \
377                         --start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \
378                         -Map u-boot.map -o u-boot
379 $(obj)u-boot:   depend \
380                 $(SUBDIRS) $(OBJS) $(LIBBOARD) $(LIBS) $(LDSCRIPT) $(obj)u-boot.lds
381                 $(GEN_UBOOT)
382 ifeq ($(CONFIG_KALLSYMS),y)
383                 smap=`$(call SYSTEM_MAP,u-boot) | \
384                         awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \
385                 $(CC) $(CFLAGS) -DSYSTEM_MAP="\"$${smap}\"" \
386                         -c common/system_map.c -o $(obj)common/system_map.o
387                 $(GEN_UBOOT) $(obj)common/system_map.o
388 endif
389
390 $(OBJS):        depend
391                 $(MAKE) -C $(CPUDIR) $(if $(REMOTE_BUILD),$@,$(notdir $@))
392
393 $(LIBS):        depend $(SUBDIRS)
394                 $(MAKE) -C $(dir $(subst $(obj),,$@))
395
396 $(LIBBOARD):    depend $(LIBS)
397                 $(MAKE) -C $(dir $(subst $(obj),,$@))
398
399 $(SUBDIRS):     depend
400                 $(MAKE) -C $@ all
401
402 $(LDSCRIPT):    depend
403                 $(MAKE) -C $(dir $@) $(notdir $@)
404
405 $(obj)u-boot.lds: $(LDSCRIPT)
406                 $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@
407
408 nand_spl:       $(TIMESTAMP_FILE) $(VERSION_FILE) depend
409                 $(MAKE) -C nand_spl/board/$(BOARDDIR) all
410
411 $(obj)u-boot-nand.bin:  nand_spl $(obj)u-boot.bin
412                 cat $(obj)nand_spl/u-boot-spl-16k.bin $(obj)u-boot.bin > $(obj)u-boot-nand.bin
413
414 onenand_ipl:    $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk
415                 $(MAKE) -C onenand_ipl/board/$(BOARDDIR) all
416
417 $(obj)u-boot-onenand.bin:       onenand_ipl $(obj)u-boot.bin
418                 cat $(ONENAND_BIN) $(obj)u-boot.bin > $(obj)u-boot-onenand.bin
419
420 mmc_spl:        $(TIMESTAMP_FILE) $(VERSION_FILE) depend
421                 $(MAKE) -C mmc_spl/board/$(BOARDDIR) all
422
423 $(obj)mmc_spl/u-boot-mmc-spl.bin:       mmc_spl
424
425 $(VERSION_FILE):
426                 @( localvers='$(shell $(TOPDIR)/tools/setlocalversion $(TOPDIR))' ; \
427                    printf '#define PLAIN_VERSION "%s%s"\n' \
428                         "$(U_BOOT_VERSION)" "$${localvers}" ; \
429                    printf '#define U_BOOT_VERSION "U-Boot %s%s"\n' \
430                         "$(U_BOOT_VERSION)" "$${localvers}" ; \
431                 ) > $@.tmp
432                 @( printf '#define CC_VERSION_STRING "%s"\n' \
433                  '$(shell $(CC) --version | head -n 1)' )>>  $@.tmp
434                 @( printf '#define LD_VERSION_STRING "%s"\n' \
435                  '$(shell $(LD) -v | head -n 1)' )>>  $@.tmp
436                 @cmp -s $@ $@.tmp && rm -f $@.tmp || mv -f $@.tmp $@
437
438 $(TIMESTAMP_FILE):
439                 @LC_ALL=C date +'#define U_BOOT_DATE "%b %d %C%y"' > $@
440                 @LC_ALL=C date +'#define U_BOOT_TIME "%T"' >> $@
441
442 updater:
443                 $(MAKE) -C tools/updater all
444
445 # Explicitly make _depend in subdirs containing multiple targets to prevent
446 # parallel sub-makes creating .depend files simultaneously.
447 depend dep:     $(TIMESTAMP_FILE) $(VERSION_FILE) \
448                 $(obj)include/autoconf.mk \
449                 $(obj)include/generated/generic-asm-offsets.h
450                 for dir in $(SUBDIRS) $(CPUDIR) $(dir $(LDSCRIPT)) ; do \
451                         $(MAKE) -C $$dir _depend ; done
452
453 TAG_SUBDIRS = $(SUBDIRS)
454 TAG_SUBDIRS += $(dir $(__LIBS))
455 TAG_SUBDIRS += include
456
457 tags ctags:
458                 ctags -w -o $(obj)ctags `find $(TAG_SUBDIRS) \
459                                                 -name '*.[chS]' -print`
460
461 etags:
462                 etags -a -o $(obj)etags `find $(TAG_SUBDIRS) \
463                                                 -name '*.[chS]' -print`
464 cscope:
465                 find $(TAG_SUBDIRS) -name '*.[chS]' -print > cscope.files
466                 cscope -b -q -k
467
468 SYSTEM_MAP = \
469                 $(NM) $1 | \
470                 grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
471                 LC_ALL=C sort
472 $(obj)System.map:       $(obj)u-boot
473                 @$(call SYSTEM_MAP,$<) > $(obj)System.map
474
475 #
476 # Auto-generate the autoconf.mk file (which is included by all makefiles)
477 #
478 # This target actually generates 2 files; autoconf.mk and autoconf.mk.dep.
479 # the dep file is only include in this top level makefile to determine when
480 # to regenerate the autoconf.mk file.
481 $(obj)include/autoconf.mk.dep: $(obj)include/config.h include/common.h
482         @$(XECHO) Generating $@ ; \
483         set -e ; \
484         : Generate the dependancies ; \
485         $(CC) -x c -DDO_DEPS_ONLY -M $(HOSTCFLAGS) $(CPPFLAGS) \
486                 -MQ $(obj)include/autoconf.mk include/common.h > $@
487
488 $(obj)include/autoconf.mk: $(obj)include/config.h
489         @$(XECHO) Generating $@ ; \
490         set -e ; \
491         : Extract the config macros ; \
492         $(CPP) $(CFLAGS) -DDO_DEPS_ONLY -dM include/common.h | \
493                 sed -n -f tools/scripts/define2mk.sed > $@.tmp && \
494         mv $@.tmp $@
495
496 $(obj)include/generated/generic-asm-offsets.h:  $(obj)include/autoconf.mk.dep \
497         $(obj)lib/asm-offsets.s
498         @$(XECHO) Generating $@
499         tools/scripts/make-asm-offsets $(obj)lib/asm-offsets.s $@
500
501 $(obj)lib/asm-offsets.s:        $(obj)include/autoconf.mk.dep \
502         $(src)lib/asm-offsets.c
503         @mkdir -p $(obj)lib
504         $(CC) -DDO_DEPS_ONLY \
505                 $(CFLAGS) $(CFLAGS_$(BCURDIR)/$(@F)) $(CFLAGS_$(BCURDIR)) \
506                 -o $@ $(src)lib/asm-offsets.c -c -S
507
508 #########################################################################
509 else    # !config.mk
510 all $(obj)u-boot.hex $(obj)u-boot.srec $(obj)u-boot.bin \
511 $(obj)u-boot.img $(obj)u-boot.dis $(obj)u-boot \
512 $(filter-out tools,$(SUBDIRS)) $(TIMESTAMP_FILE) $(VERSION_FILE) \
513 updater depend dep tags ctags etags cscope $(obj)System.map:
514         @echo "System not configured - see README" >&2
515         @ exit 1
516
517 tools:
518         $(MAKE) -C $@ all
519 endif   # config.mk
520
521 easylogo env gdb:
522         $(MAKE) -C tools/$@ all MTD_VERSION=${MTD_VERSION}
523 gdbtools: gdb
524
525 tools-all: easylogo env gdb
526         $(MAKE) -C tools HOST_TOOLS_ALL=y
527
528 .PHONY : CHANGELOG
529 CHANGELOG:
530         git log --no-merges U-Boot-1_1_5.. | \
531         unexpand -a | sed -e 's/\s\s*$$//' > $@
532
533 include/license.h: tools/bin2header COPYING
534         cat COPYING | gzip -9 -c | ./tools/bin2header license_gzip > include/license.h
535 #########################################################################
536
537 unconfig:
538         @rm -f $(obj)include/config.h $(obj)include/config.mk \
539                 $(obj)board/*/config.tmp $(obj)board/*/*/config.tmp \
540                 $(obj)include/autoconf.mk $(obj)include/autoconf.mk.dep
541
542 %_config::      unconfig
543         @$(MKCONFIG) -A $(@:_config=)
544
545 sinclude $(obj).boards.depend
546 $(obj).boards.depend:   boards.cfg
547         awk '(NF && $$1 !~ /^#/) { print $$1 ": " $$1 "_config; $$(MAKE)" }' $< > $@
548
549 #
550 # Functions to generate common board directory names
551 #
552 lcname  = $(shell echo $(1) | sed -e 's/\(.*\)_config/\L\1/')
553 ucname  = $(shell echo $(1) | sed -e 's/\(.*\)_config/\U\1/')
554
555 #########################################################################
556 ## Coldfire
557 #########################################################################
558
559 astro_mcf5373l_config \
560 astro_mcf5373l_RAM_config :     unconfig
561         @$(MKCONFIG) -n $@ -t $@ astro_mcf5373l m68k mcf532x mcf5373l astro
562
563 M52277EVB_config \
564 M52277EVB_spansion_config \
565 M52277EVB_stmicro_config :      unconfig
566         @case "$@" in \
567         M52277EVB_config)               FLASH=SPANSION;; \
568         M52277EVB_spansion_config)      FLASH=SPANSION;; \
569         M52277EVB_stmicro_config)       FLASH=STMICRO;; \
570         esac; \
571         if [ "$${FLASH}" = "SPANSION" ] ; then \
572                 echo "#define CONFIG_SYS_SPANSION_BOOT" >> $(obj)include/config.h ; \
573                 echo "CONFIG_SYS_TEXT_BASE = 0x00000000" > $(obj)board/freescale/m52277evb/config.tmp ; \
574                 cp $(obj)board/freescale/m52277evb/u-boot.spa $(obj)board/freescale/m52277evb/u-boot.lds ; \
575         fi; \
576         if [ "$${FLASH}" = "STMICRO" ] ; then \
577                 echo "#define CONFIG_CF_SBF"    >> $(obj)include/config.h ; \
578                 echo "#define CONFIG_SYS_STMICRO_BOOT"  >> $(obj)include/config.h ; \
579                 echo "CONFIG_SYS_TEXT_BASE = 0x43E00000" > $(obj)board/freescale/m52277evb/config.tmp ; \
580                 cp $(obj)board/freescale/m52277evb/u-boot.stm $(obj)board/freescale/m52277evb/u-boot.lds ; \
581         fi
582         @$(MKCONFIG) -n $@ -a M52277EVB m68k mcf5227x m52277evb freescale
583
584 M5235EVB_config \
585 M5235EVB_Flash16_config \
586 M5235EVB_Flash32_config:        unconfig
587         @case "$@" in \
588         M5235EVB_config)                FLASH=16;; \
589         M5235EVB_Flash16_config)        FLASH=16;; \
590         M5235EVB_Flash32_config)        FLASH=32;; \
591         esac; \
592         if [ "$${FLASH}" != "16" ] ; then \
593                 echo "#define NORFLASH_PS32BIT  1" >> $(obj)include/config.h ; \
594                 echo "CONFIG_SYS_TEXT_BASE = 0xFFC00000" > $(obj)board/freescale/m5235evb/config.tmp ; \
595                 cp $(obj)board/freescale/m5235evb/u-boot.32 $(obj)board/freescale/m5235evb/u-boot.lds ; \
596         else \
597                 echo "CONFIG_SYS_TEXT_BASE = 0xFFE00000" > $(obj)board/freescale/m5235evb/config.tmp ; \
598                 cp $(obj)board/freescale/m5235evb/u-boot.16 $(obj)board/freescale/m5235evb/u-boot.lds ; \
599         fi
600         @$(MKCONFIG) -n $@ -a M5235EVB m68k mcf523x m5235evb freescale
601
602 cobra5272_config :              unconfig
603         @$(MKCONFIG) $@ m68k mcf52x2 cobra5272
604
605 EB+MCF-EV123_config :           unconfig
606         @mkdir -p $(obj)include
607         @mkdir -p $(obj)board/BuS/EB+MCF-EV123
608         @echo "CONFIG_SYS_TEXT_BASE = 0xFFE00000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk
609         @$(MKCONFIG) -n $@ EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
610
611 EB+MCF-EV123_internal_config :  unconfig
612         @mkdir -p $(obj)include
613         @mkdir -p $(obj)board/BuS/EB+MCF-EV123
614         @echo "CONFIG_SYS_TEXT_BASE = 0xF0000000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk
615         @$(MKCONFIG) -n $@ EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
616
617 M5329AFEE_config \
618 M5329BFEE_config :      unconfig
619         @case "$@" in \
620         M5329AFEE_config)       NAND=0;; \
621         M5329BFEE_config)       NAND=16;; \
622         esac; \
623         if [ "$${NAND}" != "0" ] ; then \
624                 echo "#define NANDFLASH_SIZE    $${NAND}" > $(obj)include/config.h ; \
625         fi
626         @$(MKCONFIG) -n $@ -a M5329EVB m68k mcf532x m5329evb freescale
627
628 M5373EVB_config :       unconfig
629         @case "$@" in \
630         M5373EVB_config)        NAND=16;; \
631         esac; \
632         if [ "$${NAND}" != "0" ] ; then \
633                 echo "#define NANDFLASH_SIZE    $${NAND}" > $(obj)include/config.h ; \
634         fi
635         @$(MKCONFIG) -a M5373EVB m68k mcf532x m5373evb freescale
636
637 M54451EVB_config \
638 M54451EVB_stmicro_config :      unconfig
639         @case "$@" in \
640         M54451EVB_config)               FLASH=NOR;; \
641         M54451EVB_stmicro_config)       FLASH=STMICRO;; \
642         esac; \
643         if [ "$${FLASH}" = "NOR" ] ; then \
644                 echo "CONFIG_SYS_TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54451evb/config.tmp ; \
645                 cp $(obj)board/freescale/m54451evb/u-boot.spa $(obj)board/freescale/m54451evb/u-boot.lds ; \
646         fi; \
647         if [ "$${FLASH}" = "STMICRO" ] ; then \
648                 echo "#define CONFIG_CF_SBF"    >> $(obj)include/config.h ; \
649                 echo "#define CONFIG_SYS_STMICRO_BOOT"  >> $(obj)include/config.h ; \
650                 echo "CONFIG_SYS_TEXT_BASE = 0x47E00000" > $(obj)board/freescale/m54451evb/config.tmp ; \
651                 cp $(obj)board/freescale/m54451evb/u-boot.stm $(obj)board/freescale/m54451evb/u-boot.lds ; \
652         fi; \
653         echo "#define CONFIG_SYS_INPUT_CLKSRC 24000000" >> $(obj)include/config.h ;
654         @$(MKCONFIG) -n $@ -a M54451EVB m68k mcf5445x m54451evb freescale
655
656 M54455EVB_config \
657 M54455EVB_atmel_config \
658 M54455EVB_intel_config \
659 M54455EVB_a33_config \
660 M54455EVB_a66_config \
661 M54455EVB_i33_config \
662 M54455EVB_i66_config \
663 M54455EVB_stm33_config :        unconfig
664         @case "$@" in \
665         M54455EVB_config)               FLASH=ATMEL; FREQ=33333333;; \
666         M54455EVB_atmel_config)         FLASH=ATMEL; FREQ=33333333;; \
667         M54455EVB_intel_config)         FLASH=INTEL; FREQ=33333333;; \
668         M54455EVB_a33_config)           FLASH=ATMEL; FREQ=33333333;; \
669         M54455EVB_a66_config)           FLASH=ATMEL; FREQ=66666666;; \
670         M54455EVB_i33_config)           FLASH=INTEL; FREQ=33333333;; \
671         M54455EVB_i66_config)           FLASH=INTEL; FREQ=66666666;; \
672         M54455EVB_stm33_config)         FLASH=STMICRO; FREQ=33333333;; \
673         esac; \
674         if [ "$${FLASH}" = "INTEL" ] ; then \
675                 echo "#define CONFIG_SYS_INTEL_BOOT" >> $(obj)include/config.h ; \
676                 echo "CONFIG_SYS_TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
677                 cp $(obj)board/freescale/m54455evb/u-boot.int $(obj)board/freescale/m54455evb/u-boot.lds ; \
678         fi; \
679         if [ "$${FLASH}" = "ATMEL" ] ; then \
680                 echo "#define CONFIG_SYS_ATMEL_BOOT"    >> $(obj)include/config.h ; \
681                 echo "CONFIG_SYS_TEXT_BASE = 0x04000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
682                 cp $(obj)board/freescale/m54455evb/u-boot.atm $(obj)board/freescale/m54455evb/u-boot.lds ; \
683         fi; \
684         if [ "$${FLASH}" = "STMICRO" ] ; then \
685                 echo "#define CONFIG_CF_SBF"    >> $(obj)include/config.h ; \
686                 echo "#define CONFIG_SYS_STMICRO_BOOT"  >> $(obj)include/config.h ; \
687                 echo "CONFIG_SYS_TEXT_BASE = 0x4FE00000" > $(obj)board/freescale/m54455evb/config.tmp ; \
688                 cp $(obj)board/freescale/m54455evb/u-boot.stm $(obj)board/freescale/m54455evb/u-boot.lds ; \
689         fi; \
690         echo "#define CONFIG_SYS_INPUT_CLKSRC $${FREQ}" >> $(obj)include/config.h ; \
691         @$(MKCONFIG) -n $@ -a M54455EVB m68k mcf5445x m54455evb freescale
692
693 M5475AFE_config \
694 M5475BFE_config \
695 M5475CFE_config \
696 M5475DFE_config \
697 M5475EFE_config \
698 M5475FFE_config \
699 M5475GFE_config :       unconfig
700         @case "$@" in \
701         M5475AFE_config)        BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
702         M5475BFE_config)        BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \
703         M5475CFE_config)        BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \
704         M5475DFE_config)        BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \
705         M5475EFE_config)        BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \
706         M5475FFE_config)        BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \
707         M5475GFE_config)        BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
708         esac; \
709         echo "#define CONFIG_SYS_BUSCLK 133333333" > $(obj)include/config.h ; \
710         echo "#define CONFIG_SYS_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \
711         echo "#define CONFIG_SYS_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \
712         if [ "$${RAM1}" != "0" ] ; then \
713                 echo "#define CONFIG_SYS_DRAMSZ1        $${RAM1}" >> $(obj)include/config.h ; \
714         fi; \
715         if [ "$${CODE}" != "0" ] ; then \
716                 echo "#define CONFIG_SYS_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \
717         fi; \
718         if [ "$${VID}" == "1" ] ; then \
719                 echo "#define CONFIG_SYS_VIDEO" >> $(obj)include/config.h ; \
720         fi; \
721         if [ "$${USB}" == "1" ] ; then \
722                 echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \
723         fi
724         @$(MKCONFIG) -n $@ -a M5475EVB m68k mcf547x_8x m547xevb freescale
725
726 M5485AFE_config \
727 M5485BFE_config \
728 M5485CFE_config \
729 M5485DFE_config \
730 M5485EFE_config \
731 M5485FFE_config \
732 M5485GFE_config \
733 M5485HFE_config :       unconfig
734         @case "$@" in \
735         M5485AFE_config)        BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
736         M5485BFE_config)        BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \
737         M5485CFE_config)        BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \
738         M5485DFE_config)        BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \
739         M5485EFE_config)        BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \
740         M5485FFE_config)        BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \
741         M5485GFE_config)        BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
742         M5485HFE_config)        BOOT=2;CODE=16;VID=1;USB=0;RAM=64;RAM1=0;; \
743         esac; \
744         echo "#define CONFIG_SYS_BUSCLK 100000000" > $(obj)include/config.h ; \
745         echo "#define CONFIG_SYS_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \
746         echo "#define CONFIG_SYS_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \
747         if [ "$${RAM1}" != "0" ] ; then \
748                 echo "#define CONFIG_SYS_DRAMSZ1        $${RAM1}" >> $(obj)include/config.h ; \
749         fi; \
750         if [ "$${CODE}" != "0" ] ; then \
751                 echo "#define CONFIG_SYS_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \
752         fi; \
753         if [ "$${VID}" == "1" ] ; then \
754                 echo "#define CONFIG_SYS_VIDEO" >> $(obj)include/config.h ; \
755         fi; \
756         if [ "$${USB}" == "1" ] ; then \
757                 echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \
758         fi
759         @$(MKCONFIG) -n $@ -a M5485EVB m68k mcf547x_8x m548xevb freescale
760
761 #========================================================================
762 # ARM
763 #========================================================================
764
765 #########################################################################
766 ## ARM926EJ-S Systems
767 #########################################################################
768
769 at91sam9261ek_nandflash_config \
770 at91sam9261ek_dataflash_cs0_config \
771 at91sam9261ek_dataflash_cs3_config \
772 at91sam9261ek_config \
773 at91sam9g10ek_nandflash_config \
774 at91sam9g10ek_dataflash_cs0_config \
775 at91sam9g10ek_dataflash_cs3_config \
776 at91sam9g10ek_config    :       unconfig
777         @mkdir -p $(obj)include
778         @if [ "$(findstring 9g10,$@)" ] ; then \
779                 echo "#define CONFIG_AT91SAM9G10EK 1"   >>$(obj)include/config.h ; \
780         else \
781                 echo "#define CONFIG_AT91SAM9261EK 1"   >>$(obj)include/config.h ; \
782         fi;
783         @if [ "$(findstring _nandflash,$@)" ] ; then \
784                 echo "#define CONFIG_SYS_USE_NANDFLASH 1"       >>$(obj)include/config.h ; \
785         elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
786                 echo "#define CONFIG_SYS_USE_DATAFLASH_CS3 1"   >>$(obj)include/config.h ; \
787         else \
788                 echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1"   >>$(obj)include/config.h ; \
789         fi;
790         @$(MKCONFIG) -n $@ -a at91sam9261ek arm arm926ejs at91sam9261ek atmel at91
791
792 at91sam9263ek_norflash_config \
793 at91sam9263ek_norflash_boot_config \
794 at91sam9263ek_nandflash_config \
795 at91sam9263ek_dataflash_config \
796 at91sam9263ek_dataflash_cs0_config \
797 at91sam9263ek_config    :       unconfig
798         @mkdir -p $(obj)include
799         @if [ "$(findstring _nandflash,$@)" ] ; then \
800                 echo "#define CONFIG_SYS_USE_NANDFLASH 1"       >>$(obj)include/config.h ; \
801         elif [ "$(findstring norflash,$@)" ] ; then \
802                 echo "#define CONFIG_SYS_USE_NORFLASH 1"        >>$(obj)include/config.h ; \
803         else \
804                 echo "#define CONFIG_SYS_USE_DATAFLASH 1"       >>$(obj)include/config.h ; \
805         fi;
806         @if [ "$(findstring norflash_boot,$@)" ] ; then \
807                 echo "#define CONFIG_SYS_USE_BOOT_NORFLASH 1"   >>$(obj)include/config.h ; \
808         fi;
809         @$(MKCONFIG) -n $@ -a at91sam9263ek arm arm926ejs at91sam9263ek atmel at91
810
811 at91sam9rlek_nandflash_config \
812 at91sam9rlek_dataflash_config \
813 at91sam9rlek_dataflash_cs0_config \
814 at91sam9rlek_config     :       unconfig
815         @mkdir -p $(obj)include
816         @if [ "$(findstring _nandflash,$@)" ] ; then \
817                 echo "#define CONFIG_SYS_USE_NANDFLASH 1"       >>$(obj)include/config.h ; \
818         else \
819                 echo "#define CONFIG_SYS_USE_DATAFLASH 1"       >>$(obj)include/config.h ; \
820         fi;
821         @$(MKCONFIG) -n $@ -a at91sam9rlek arm arm926ejs at91sam9rlek atmel at91
822
823 at91sam9m10g45ek_nandflash_config \
824 at91sam9m10g45ek_dataflash_config \
825 at91sam9m10g45ek_dataflash_cs0_config \
826 at91sam9m10g45ek_config \
827 at91sam9g45ekes_nandflash_config \
828 at91sam9g45ekes_dataflash_config \
829 at91sam9g45ekes_dataflash_cs0_config \
830 at91sam9g45ekes_config  :       unconfig
831         @mkdir -p $(obj)include
832                 @if [ "$(findstring 9m10,$@)" ] ; then \
833                 echo "#define CONFIG_AT91SAM9M10G45EK 1"        >>$(obj)include/config.h ; \
834         else \
835                 echo "#define CONFIG_AT91SAM9G45EKES 1" >>$(obj)include/config.h ; \
836         fi;
837         @if [ "$(findstring _nandflash,$@)" ] ; then \
838                 echo "#define CONFIG_SYS_USE_NANDFLASH 1"       >>$(obj)include/config.h ; \
839         else \
840                 echo "#define CONFIG_ATMEL_SPI 1"       >>$(obj)include/config.h ; \
841         fi;
842         @$(MKCONFIG) -n $@ -a at91sam9m10g45ek arm arm926ejs at91sam9m10g45ek atmel at91
843
844 pm9g45_config   :       unconfig
845         @mkdir -p $(obj)include
846         @$(MKCONFIG) -a pm9g45 arm arm926ejs pm9g45 ronetix at91
847
848 SBC35_A9G20_NANDFLASH_config \
849 SBC35_A9G20_EEPROM_config \
850 SBC35_A9G20_config      :       unconfig
851         @mkdir -p $(obj)include
852         @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
853         @$(MKCONFIG) -n $@ -a sbc35_a9g20 arm arm926ejs sbc35_a9g20 calao at91
854
855 TNY_A9G20_NANDFLASH_config \
856 TNY_A9G20_EEPROM_config \
857 TNY_A9G20_config \
858 TNY_A9260_NANDFLASH_config \
859 TNY_A9260_EEPROM_config \
860 TNY_A9260_config        :       unconfig
861         @mkdir -p $(obj)include
862         @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
863         @$(MKCONFIG) -n $@ -a tny_a9260 arm arm926ejs tny_a9260 calao at91
864
865 ########################################################################
866 ## ARM Integrator boards - see doc/README-integrator for more info.
867 integratorap_config     \
868 ap_config               \
869 ap966_config            \
870 ap922_config            \
871 ap922_XA10_config       \
872 ap7_config              \
873 ap720t_config           \
874 ap920t_config           \
875 ap926ejs_config         \
876 ap946es_config: unconfig
877         @board/armltd/integrator/split_by_variant.sh ap $@
878
879 integratorcp_config     \
880 cp_config               \
881 cp920t_config           \
882 cp926ejs_config         \
883 cp946es_config          \
884 cp1136_config           \
885 cp966_config            \
886 cp922_config            \
887 cp922_XA10_config       \
888 cp1026_config: unconfig
889         @board/armltd/integrator/split_by_variant.sh cp $@
890
891 xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$(subst _config,,$1))))
892
893 omap1610inn_config \
894 omap1610inn_cs0boot_config \
895 omap1610inn_cs3boot_config \
896 omap1610inn_cs_autoboot_config \
897 omap1610h2_config \
898 omap1610h2_cs0boot_config \
899 omap1610h2_cs3boot_config \
900 omap1610h2_cs_autoboot_config:  unconfig
901         @mkdir -p $(obj)include
902         @if [ "$(findstring _cs0boot_, $@)" ] ; then \
903                 echo "#define CONFIG_CS0_BOOT" >> .$(obj)include/config.h ; \
904         elif [ "$(findstring _cs_autoboot_, $@)" ] ; then \
905                 echo "#define CONFIG_CS_AUTOBOOT" >> $(obj)include/config.h ; \
906         else \
907                 echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \
908         fi;
909         @$(MKCONFIG) -n $@ -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn ti omap
910
911 omap730p2_config \
912 omap730p2_cs0boot_config \
913 omap730p2_cs3boot_config :      unconfig
914         @mkdir -p $(obj)include
915         @if [ "$(findstring _cs0boot_, $@)" ] ; then \
916                 echo "#define CONFIG_CS0_BOOT" >> $(obj)include/config.h ; \
917         else \
918                 echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \
919         fi;
920         @$(MKCONFIG) -n $@ -a omap730p2 arm arm926ejs omap730p2 ti omap
921
922 spear300_config \
923 spear310_config \
924 spear320_config :       unconfig
925         @$(MKCONFIG) -n $@ -t $@ spear3xx arm arm926ejs $(@:_config=) spear spear
926
927 spear600_config :       unconfig
928         @$(MKCONFIG) -n $@ -t $@ spear6xx arm arm926ejs $(@:_config=) spear spear
929
930 SX1_stdout_serial_config \
931 SX1_config:             unconfig
932         @mkdir -p $(obj)include
933         @if [ "$(findstring _stdout_serial_, $@)" ] ; then \
934                 echo "#undef CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \
935         else \
936                 echo "#define CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \
937         fi;
938         @$(MKCONFIG) -n $@ SX1 arm arm925t sx1
939
940 # TRAB default configuration:   8 MB Flash, 32 MB RAM
941 trab_config \
942 trab_bigram_config \
943 trab_bigflash_config \
944 trab_old_config:        unconfig
945         @mkdir -p $(obj)include
946         @mkdir -p $(obj)board/trab
947         @[ -z "$(findstring _bigram,$@)" ] || \
948                 { echo "#define CONFIG_FLASH_8MB"  >>$(obj)include/config.h ; \
949                   echo "#define CONFIG_RAM_32MB"   >>$(obj)include/config.h ; \
950                 }
951         @[ -z "$(findstring _bigflash,$@)" ] || \
952                 { echo "#define CONFIG_FLASH_16MB" >>$(obj)include/config.h ; \
953                   echo "#define CONFIG_RAM_16MB"   >>$(obj)include/config.h ; \
954                   echo "CONFIG_SYS_TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \
955                 }
956         @[ -z "$(findstring _old,$@)" ] || \
957                 { echo "#define CONFIG_FLASH_8MB"  >>$(obj)include/config.h ; \
958                   echo "#define CONFIG_RAM_16MB"   >>$(obj)include/config.h ; \
959                   echo "CONFIG_SYS_TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \
960                 }
961         @$(MKCONFIG) -n $@ -a trab arm arm920t trab - s3c24x0
962
963 tx25_config     : unconfig
964         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
965         @$(MKCONFIG) $@ arm arm926ejs tx25 karo mx25
966
967 edb9301_config \
968 edb9302_config \
969 edb9302a_config \
970 edb9307_config \
971 edb9307a_config \
972 edb9312_config \
973 edb9315_config \
974 edb9315a_config: unconfig
975         @$(MKCONFIG) -n $@ -t $(@:_config=) edb93xx arm arm920t edb93xx - ep93xx
976
977 #########################################################################
978 # ARM supplied Versatile development boards
979 #########################################################################
980
981 versatile_config        \
982 versatileab_config      \
983 versatilepb_config :    unconfig
984         @board/armltd/versatile/split_by_variant.sh $@
985
986 #########################################################################
987 ## XScale Systems
988 #########################################################################
989
990 pdnb3_config \
991 scpu_config:    unconfig
992         @mkdir -p $(obj)include
993         @if [ "$(findstring scpu_,$@)" ] ; then \
994                 echo "#define CONFIG_SCPU"      >>$(obj)include/config.h ; \
995         fi
996         @$(MKCONFIG) -n $@ -a pdnb3 arm ixp pdnb3 prodrive
997
998 #########################################################################
999 ## ARM1136 Systems
1000 #########################################################################
1001
1002 apollon_config          : unconfig
1003         @mkdir -p $(obj)include
1004         @echo "#define CONFIG_ONENAND_U_BOOT" > $(obj)include/config.h
1005         @echo "CONFIG_ONENAND_U_BOOT = y" >> $(obj)include/config.mk
1006         @$(MKCONFIG) $@ arm arm1136 apollon - omap24xx
1007
1008 imx31_phycore_eet_config \
1009 imx31_phycore_config    : unconfig
1010         @mkdir -p $(obj)include
1011         @if [ -n "$(findstring _eet_,$@)" ]; then                       \
1012                 echo "#define CONFIG_IMX31_PHYCORE_EET" >> $(obj)include/config.h;      \
1013         fi
1014         @$(MKCONFIG) -n $@ -a imx31_phycore arm arm1136 imx31_phycore - mx31
1015
1016 mx31pdk_config \
1017 mx31pdk_nand_config     : unconfig
1018         @mkdir -p $(obj)include
1019         @if [ -n "$(findstring _nand_,$@)" ]; then                                      \
1020                 echo "#define CONFIG_NAND_U_BOOT" >> $(obj)include/config.h;            \
1021         else                                                                            \
1022                 echo "#define CONFIG_SKIP_LOWLEVEL_INIT" >> $(obj)include/config.h;     \
1023         fi
1024         @$(MKCONFIG) -n $@ -a mx31pdk arm arm1136 mx31pdk freescale mx31
1025
1026 #########################################################################
1027 ## ARM1176 Systems
1028 #########################################################################
1029 smdk6400_noUSB_config   \
1030 smdk6400_config :       unconfig
1031         @mkdir -p $(obj)include $(obj)board/samsung/smdk6400
1032         @mkdir -p $(obj)nand_spl/board/samsung/smdk6400
1033         @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
1034         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
1035         @if [ -z "$(findstring smdk6400_noUSB_config,$@)" ]; then                       \
1036                 echo "RAM_TEXT = 0x57e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\
1037         else                                                                            \
1038                 echo "RAM_TEXT = 0xc7e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\
1039         fi
1040         @$(MKCONFIG) smdk6400 arm arm1176 smdk6400 samsung s3c64xx
1041         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
1042
1043 #========================================================================
1044 # Nios
1045 #========================================================================
1046
1047 #########################################################################
1048 ## Nios-II
1049 #########################################################################
1050
1051 # nios2 generic boards
1052 NIOS2_GENERIC = nios2-generic
1053
1054 $(NIOS2_GENERIC:%=%_config) : unconfig
1055         @$(MKCONFIG) $@ nios2 nios2 nios2-generic altera
1056
1057 #########################################################################
1058 #########################################################################
1059
1060 clean:
1061         @rm -f $(obj)examples/standalone/82559_eeprom                     \
1062                $(obj)examples/standalone/atmel_df_pow2                    \
1063                $(obj)examples/standalone/eepro100_eeprom                  \
1064                $(obj)examples/standalone/hello_world                      \
1065                $(obj)examples/standalone/interrupt                        \
1066                $(obj)examples/standalone/mem_to_mem_idma2intr             \
1067                $(obj)examples/standalone/sched                            \
1068                $(obj)examples/standalone/smc911{11,x}_eeprom              \
1069                $(obj)examples/standalone/test_burst                       \
1070                $(obj)examples/standalone/timer
1071         @rm -f $(obj)examples/api/demo{,.bin}
1072         @rm -f $(obj)tools/bmp_logo        $(obj)tools/easylogo/easylogo  \
1073                $(obj)tools/env/{fw_printenv,fw_setenv}                    \
1074                $(obj)tools/envcrc                                         \
1075                $(obj)tools/gdb/{astest,gdbcont,gdbsend}                   \
1076                $(obj)tools/gen_eth_addr    $(obj)tools/img2srec           \
1077                $(obj)tools/mkimage         $(obj)tools/mpc86x_clk         \
1078                $(obj)tools/ncb             $(obj)tools/ubsha1
1079         @rm -f $(obj)board/cray/L1/{bootscript.c,bootscript.image}        \
1080                $(obj)board/matrix_vision/*/bootscript.img                 \
1081                $(obj)board/netstar/{eeprom,crcek,crcit,*.srec,*.bin}      \
1082                $(obj)board/trab/trab_fkt   $(obj)board/voiceblue/eeprom   \
1083                $(obj)board/armltd/{integratorap,integratorcp}/u-boot.lds  \
1084                $(obj)u-boot.lds                                           \
1085                $(obj)arch/blackfin/cpu/bootrom-asm-offsets.[chs]
1086         @rm -f $(obj)include/bmp_logo.h
1087         @rm -f $(obj)lib/asm-offsets.s
1088         @rm -f $(obj)nand_spl/{u-boot.lds,u-boot-spl,u-boot-spl.map,System.map}
1089         @rm -f $(obj)onenand_ipl/onenand-{ipl,ipl.bin,ipl.map}
1090         @rm -f $(obj)mmc_spl/{u-boot.lds,u-boot-spl,u-boot-spl.map,u-boot-spl.bin,u-boot-mmc-spl.bin}
1091         @rm -f $(ONENAND_BIN)
1092         @rm -f $(obj)onenand_ipl/u-boot.lds
1093         @rm -f $(TIMESTAMP_FILE) $(VERSION_FILE)
1094         @find $(OBJTREE) -type f \
1095                 \( -name 'core' -o -name '*.bak' -o -name '*~' \
1096                 -o -name '*.o'  -o -name '*.a' -o -name '*.exe' \) -print \
1097                 | xargs rm -f
1098
1099 clobber:        clean
1100         @find $(OBJTREE) -type f \( -name '*.depend' \
1101                 -o -name '*.srec' -o -name '*.bin' -o -name u-boot.img \) \
1102                 -print0 \
1103                 | xargs -0 rm -f
1104         @rm -f $(OBJS) $(obj)*.bak $(obj)ctags $(obj)etags $(obj)TAGS \
1105                 $(obj)cscope.* $(obj)*.*~
1106         @rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL)
1107         @rm -f $(obj)u-boot.kwb
1108         @rm -f $(obj)u-boot.imx
1109         @rm -f $(obj)tools/{env/crc32.c,inca-swap-bytes}
1110         @rm -f $(obj)arch/powerpc/cpu/mpc824x/bedbug_603e.c
1111         @rm -fr $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm
1112         @rm -fr $(obj)include/generated
1113         @[ ! -d $(obj)nand_spl ] || find $(obj)nand_spl -name "*" -type l -print | xargs rm -f
1114         @[ ! -d $(obj)onenand_ipl ] || find $(obj)onenand_ipl -name "*" -type l -print | xargs rm -f
1115         @[ ! -d $(obj)mmc_spl ] || find $(obj)mmc_spl -name "*" -type l -print | xargs rm -f
1116
1117 ifeq ($(OBJTREE),$(SRCTREE))
1118 mrproper \
1119 distclean:      clobber unconfig
1120 else
1121 mrproper \
1122 distclean:      clobber unconfig
1123         rm -rf $(obj)*
1124 endif
1125
1126 backup:
1127         F=`basename $(TOPDIR)` ; cd .. ; \
1128         gtar --force-local -zcvf `LC_ALL=C date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F
1129
1130 #########################################################################