opensuse:kernel.git
5 years agocpufreq / powernow-k8: Remove usage of smp_processor_id() in preemptible code
Andreas Herrmann [Mon, 22 Oct 2012 22:55:10 +0000 (00:55 +0200)]
cpufreq / powernow-k8: Remove usage of smp_processor_id() in preemptible code

commit e4df1cbcc1f329e53a1fff7450b2229e0addff20 upstream.

Commit 6889125b8b4e09c5e53e6ecab3433bed1ce198c9
(cpufreq/powernow-k8: workqueue user shouldn't migrate the kworker to another CPU)
causes powernow-k8 to trigger a preempt warning, e.g.:

  BUG: using smp_processor_id() in preemptible [00000000] code: cpufreq/3776
  caller is powernowk8_target+0x20/0x49
  Pid: 3776, comm: cpufreq Not tainted 3.6.0 #9
  Call Trace:
   [<ffffffff8125b447>] debug_smp_processor_id+0xc7/0xe0
   [<ffffffff814877e7>] powernowk8_target+0x20/0x49
   [<ffffffff81482b02>] __cpufreq_driver_target+0x82/0x8a
   [<ffffffff81484fc6>] cpufreq_governor_performance+0x4e/0x54
   [<ffffffff81482c50>] __cpufreq_governor+0x8c/0xc9
   [<ffffffff81482e6f>] __cpufreq_set_policy+0x1a9/0x21e
   [<ffffffff814839af>] store_scaling_governor+0x16f/0x19b
   [<ffffffff81484f16>] ? cpufreq_update_policy+0x124/0x124
   [<ffffffff8162b4a5>] ? _raw_spin_unlock_irqrestore+0x2c/0x49
   [<ffffffff81483640>] store+0x60/0x88
   [<ffffffff811708c0>] sysfs_write_file+0xf4/0x130
   [<ffffffff8111243b>] vfs_write+0xb5/0x151
   [<ffffffff811126e0>] sys_write+0x4a/0x71
   [<ffffffff816319a9>] system_call_fastpath+0x16/0x1b

Fix this by by always using work_on_cpu().

Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agobcma: fix unregistration of cores
Piotr Haber [Thu, 11 Oct 2012 12:05:15 +0000 (14:05 +0200)]
bcma: fix unregistration of cores

commit 1fffa905adffbf0d3767fc978ef09afb830275eb upstream.

When cores are unregistered, entries
need to be removed from cores list in a safe manner.

Reported-by: Stanislaw Gruszka <sgruszka@redhat.com>
Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Signed-off-by: Piotr Haber <phaber@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agomac80211: check if key has TKIP type before updating IV
Stanislaw Gruszka [Tue, 2 Oct 2012 19:34:23 +0000 (21:34 +0200)]
mac80211: check if key has TKIP type before updating IV

commit 4045f72bcf3c293c7c5932ef001742d8bb5ded76 upstream.

This patch fix corruption which can manifest itself by following crash
when switching on rfkill switch with rt2x00 driver:
https://bugzilla.redhat.com/attachment.cgi?id=615362

Pointer key->u.ccmp.tfm of group key get corrupted in:

ieee80211_rx_h_michael_mic_verify():

        /* update IV in key information to be able to detect replays */
        rx->key->u.tkip.rx[rx->security_idx].iv32 = rx->tkip_iv32;
        rx->key->u.tkip.rx[rx->security_idx].iv16 = rx->tkip_iv16;

because rt2x00 always set RX_FLAG_MMIC_STRIPPED, even if key is not TKIP.

We already check type of the key in different path in
ieee80211_rx_h_michael_mic_verify() function, so adding additional
check here is reasonable.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoARM: at91/i2c: change id to let i2c-gpio work
Bo Shen [Mon, 15 Oct 2012 09:30:27 +0000 (17:30 +0800)]
ARM: at91/i2c: change id to let i2c-gpio work

commit 7840487cd6298f9f931103b558290d8d98d41c49 upstream.

The i2c core driver will turn the platform device ID to busnum
When using platfrom device ID as -1, it means dynamically assigned
the busnum. When writing code, we need to make sure the busnum,
and call i2c_register_board_info(int busnum, ...) to register device
if using -1, we do not know the value of busnum

In order to solve this issue, set the platform device ID as a fix number
Here using 0 to match the busnum used in i2c_regsiter_board_info()

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agovhost: fix mergeable bufs on BE hosts
Michael S. Tsirkin [Wed, 24 Oct 2012 18:37:51 +0000 (20:37 +0200)]
vhost: fix mergeable bufs on BE hosts

commit 910a578f7e9400a78a3b13aba0b4d2df16a2cb05 upstream.

We copy head count to a 16 bit field, this works by chance on LE but on
BE guest gets 0. Fix it up.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Alexander Graf <agraf@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoxhci: Fix potential NULL ptr deref in command cancellation.
Sarah Sharp [Tue, 16 Oct 2012 20:17:43 +0000 (13:17 -0700)]
xhci: Fix potential NULL ptr deref in command cancellation.

commit 43a09f7fb01fa1e091416a2aa49b6c666458c1ee upstream.

The command cancellation code doesn't check whether find_trb_seg()
couldn't find the segment that contains the TRB to be canceled.  This
could cause a NULL pointer deference later in the function when next_trb
is called.  It's unlikely to happen unless something is wrong with the
command ring pointers, so add some debugging in case it happens.

This patch should be backported to stable kernels as old as 3.0, that
contain the commit b63f4053cc8aa22a98e3f9a97845afe6c15d0a0d "xHCI:
handle command after aborting the command ring".

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoUSB: mos7840: remove invalid disconnect handling
Johan Hovold [Thu, 25 Oct 2012 16:56:33 +0000 (18:56 +0200)]
USB: mos7840: remove invalid disconnect handling

commit e681b66f2e19fadbe8a7e2a17900978cb6bc921f upstream.

Remove private zombie flag used to signal disconnect and to prevent
control urb from being submitted from interrupt urb completion handler.

The control urb will not be re-submitted as both the control urb and the
interrupt urb is killed on disconnect.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoUSB: mos7840: remove NULL-urb submission
Johan Hovold [Thu, 25 Oct 2012 16:56:32 +0000 (18:56 +0200)]
USB: mos7840: remove NULL-urb submission

commit 28c3ae9a8cf45f439c9a0779ebd0256e2ae72813 upstream.

The private int_urb is never allocated so the submission from the
control completion handler will always fail. Remove this odd piece of
broken code.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoUSB: mos7840: fix port-device leak in error path
Johan Hovold [Thu, 25 Oct 2012 11:35:10 +0000 (13:35 +0200)]
USB: mos7840: fix port-device leak in error path

commit 3eb55cc4ed88eee3b5230f66abcdbd2a91639eda upstream.

The driver set the usb-serial port pointers to NULL on errors in attach,
effectively preventing usb-serial core from decrementing the port ref
counters and releasing the port devices and associated data.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoUSB: mos7840: fix urb leak at release
Johan Hovold [Thu, 25 Oct 2012 11:35:09 +0000 (13:35 +0200)]
USB: mos7840: fix urb leak at release

commit 65a4cdbb170e4ec1a7fa0e94936d47e24a17b0e8 upstream.

Make sure control urb is freed at release.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoUSB: sierra: fix memory leak in probe error path
Johan Hovold [Thu, 25 Oct 2012 08:29:18 +0000 (10:29 +0200)]
USB: sierra: fix memory leak in probe error path

commit 084817d79399ab5ccab2f90a148b0369912a8369 upstream.

Move interface data allocation to attach so that it is deallocated on
errors in usb-serial probe.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoUSB: sierra: fix memory leak in attach error path
Johan Hovold [Thu, 25 Oct 2012 08:29:17 +0000 (10:29 +0200)]
USB: sierra: fix memory leak in attach error path

commit 7e41f9bcdd2e813ea2a3c40db291d87ea06b559f upstream.

Make sure port private data is deallocated on errors in attach.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoUSB: serial: Fix memory leak in sierra_release()
Lennart Sorensen [Wed, 24 Oct 2012 14:23:09 +0000 (10:23 -0400)]
USB: serial: Fix memory leak in sierra_release()

commit f7bc5051667b74c3861f79eed98c60d5c3b883f7 upstream.

I found a memory leak in sierra_release() (well sierra_probe() I guess)
that looses 8 bytes each time the driver releases a device.

Signed-off-by: Len Sorensen <lsorense@csclub.uwaterloo.ca>
Acked-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoUSB: opticon: fix memory leak in error path
Johan Hovold [Thu, 25 Oct 2012 08:29:12 +0000 (10:29 +0200)]
USB: opticon: fix memory leak in error path

commit acbf0e5263de563e25f7c104868e4490b9e72b13 upstream.

Fix memory leak in write error path.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoUSB: opticon: fix DMA from stack
Johan Hovold [Thu, 25 Oct 2012 08:29:11 +0000 (10:29 +0200)]
USB: opticon: fix DMA from stack

commit ea0dbebffe118724cd4df7d9b071ea8ee48d48f0 upstream.

Make sure to allocate the control-message buffer dynamically as some
platforms cannot do DMA from stack.

Note that only the first byte of the old buffer was used.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoUSB: whiteheat: fix memory leak in error path
Johan Hovold [Thu, 25 Oct 2012 08:29:01 +0000 (10:29 +0200)]
USB: whiteheat: fix memory leak in error path

commit c129197c99550d356cf5f69b046994dd53cd1b9d upstream.

Make sure command buffer is deallocated in case of errors during attach.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Cc: <support@connecttech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agousb hub: send clear_tt_buffer_complete events when canceling TT clear work
Octavian Purdila [Mon, 1 Oct 2012 19:21:12 +0000 (22:21 +0300)]
usb hub: send clear_tt_buffer_complete events when canceling TT clear work

commit 3b6054da68f9b0d5ed6a7ed0f42a79e61904352c upstream.

There is a race condition in the USB hub code with regard to handling
TT clear requests that can get the HCD driver in a deadlock. Usually
when an TT clear request is scheduled it will be executed immediately:

<7>[    6.077583] usb 2-1.3: unlink qh1-0e01/f4d4db00 start 0 [1/2 us]
<3>[    6.078041] usb 2-1: clear tt buffer port 3, a3 ep2 t04048d82
<7>[    6.078299] hub_tt_work:731
<7>[    9.309089] usb 2-1.5: link qh1-0e01/f4d506c0 start 0 [1/2 us]
<7>[    9.324526] ehci_hcd 0000:00:1d.0: reused qh f4d4db00 schedule
<7>[    9.324539] usb 2-1.3: link qh1-0e01/f4d4db00 start 0 [1/2 us]
<7>[    9.341530] usb 1-1.1: link qh4-0e01/f397aec0 start 2 [1/2 us]
<7>[   10.116159] usb 2-1.3: unlink qh1-0e01/f4d4db00 start 0 [1/2 us]
<3>[   10.116459] usb 2-1: clear tt buffer port 3, a3 ep2 t04048d82
<7>[   10.116537] hub_tt_work:731

However, if a suspend operation is triggered before hub_tt_work is
scheduled, hub_quiesce will cancel the work without notifying the HCD
driver:

<3>[   35.033941] usb 2-1: clear tt buffer port 3, a3 ep2 t04048d80
<5>[   35.034022] sd 0:0:0:0: [sda] Stopping disk
<7>[   35.034039] hub 2-1:1.0: hub_suspend
<7>[   35.034067] usb 2-1: unlink qh256-0001/f3b1ab00 start 1 [1/0 us]
<7>[   35.035085] hub 1-0:1.0: hub_suspend
<7>[   35.035102] usb usb1: bus suspend, wakeup 0
<7>[   35.035106] ehci_hcd 0000:00:1a.0: suspend root hub
<7>[   35.035298] hub 2-0:1.0: hub_suspend
<7>[   35.035313] usb usb2: bus suspend, wakeup 0
<7>[   35.035315] ehci_hcd 0000:00:1d.0: suspend root hub
<6>[   35.250017] PM: suspend of devices complete after 216.979 msecs
<6>[   35.250822] PM: late suspend of devices complete after 0.799 msecs
<7>[   35.252343] ehci_hcd 0000:00:1d.0: wakeup: 1
<7>[   35.262923] ehci_hcd 0000:00:1d.0: --> PCI D3hot
<7>[   35.263302] ehci_hcd 0000:00:1a.0: wakeup: 1
<7>[   35.273912] ehci_hcd 0000:00:1a.0: --> PCI D3hot
<6>[   35.274254] PM: noirq suspend of devices complete after 23.442 msecs
<6>[   35.274975] ACPI: Preparing to enter system sleep state S3
<6>[   35.292666] PM: Saving platform NVS memory
<7>[   35.295030] Disabling non-boot CPUs ...
<6>[   35.297351] CPU 1 is now offline
<6>[   35.300345] CPU 2 is now offline
<6>[   35.303929] CPU 3 is now offline
<7>[   35.303931] lockdep: fixing up alternatives.
<6>[   35.304825] Extended CMOS year: 2000

When the device will resume the EHCI driver will get stuck in
ehci_endpoint_disable waiting for the tt_clearing flag to reset:

<0>[   47.610967] usb 2-1.3: **** DPM device timeout ****
<7>[   47.610972]  f2f11c60 00000092 f2f11c0c c10624a5 00000003 f4c6e880 c1c8a4c0 c1c8a4c0
<7>[   47.610983]  15c55698 0000000b f56b34c0 f2a45b70 f4c6e880 00000082 f2a4602c f2f11c30
<7>[   47.610993]  c10787f8 f4cac000 f2a45b70 00000000 f4cac010 f2f11c58 00000046 00000001
<7>[   47.611004] Call Trace:
<7>[   47.611006]  [<c10624a5>] ? sched_clock_cpu+0xf5/0x160
<7>[   47.611019]  [<c10787f8>] ? lock_release_holdtime.part.22+0x88/0xf0
<7>[   47.611026]  [<c103ed46>] ? lock_timer_base.isra.35+0x26/0x50
<7>[   47.611034]  [<c17592d3>] ? schedule_timeout+0x133/0x290
<7>[   47.611044]  [<c175b43e>] schedule+0x1e/0x50
<7>[   47.611051]  [<c17592d8>] schedule_timeout+0x138/0x290
<7>[   47.611057]  [<c10624a5>] ? sched_clock_cpu+0xf5/0x160
<7>[   47.611063]  [<c103e560>] ? usleep_range+0x40/0x40
<7>[   47.611070]  [<c1759445>] schedule_timeout_uninterruptible+0x15/0x20
<7>[   47.611077]  [<c14935f4>] ehci_endpoint_disable+0x64/0x160
<7>[   47.611084]  [<c147d1ee>] ? usb_hcd_flush_endpoint+0x10e/0x1d0
<7>[   47.611092]  [<c1165663>] ? sysfs_add_file+0x13/0x20
<7>[   47.611100]  [<c147d5a9>] usb_hcd_disable_endpoint+0x29/0x40
<7>[   47.611107]  [<c147fafc>] usb_disable_endpoint+0x5c/0x80
<7>[   47.611111]  [<c147fb57>] usb_disable_interface+0x37/0x50
<7>[   47.611116]  [<c1477650>] usb_reset_and_verify_device+0x4b0/0x640
<7>[   47.611122]  [<c1474665>] ? hub_port_status+0xb5/0x100
<7>[   47.611129]  [<c147a975>] usb_port_resume+0xd5/0x220
<7>[   47.611136]  [<c148877f>] generic_resume+0xf/0x30
<7>[   47.611142]  [<c14821a3>] usb_resume+0x133/0x180
<7>[   47.611147]  [<c1473b10>] ? usb_dev_thaw+0x10/0x10
<7>[   47.611152]  [<c1473b1d>] usb_dev_resume+0xd/0x10
<7>[   47.611157]  [<c13baa60>] dpm_run_callback+0x40/0xb0
<7>[   47.611164]  [<c13bdb03>] ? pm_runtime_enable+0x43/0x70
<7>[   47.611171]  [<c13bafc6>] device_resume+0x1a6/0x2c0
<7>[   47.611177]  [<c13ba940>] ? dpm_show_time+0xe0/0xe0
<7>[   47.611183]  [<c13bb0f9>] async_resume+0x19/0x40
<7>[   47.611189]  [<c10580c4>] async_run_entry_fn+0x64/0x160
<7>[   47.611196]  [<c104a244>] ? process_one_work+0x104/0x480
<7>[   47.611203]  [<c104a24c>] ? process_one_work+0x10c/0x480
<7>[   47.611209]  [<c104a2c0>] process_one_work+0x180/0x480
<7>[   47.611215]  [<c104a244>] ? process_one_work+0x104/0x480
<7>[   47.611220]  [<c1058060>] ? async_schedule+0x10/0x10
<7>[   47.611226]  [<c104c15c>] worker_thread+0x11c/0x2f0
<7>[   47.611233]  [<c104c040>] ? manage_workers.isra.27+0x1f0/0x1f0
<7>[   47.611239]  [<c10507f8>] kthread+0x78/0x80
<7>[   47.611244]  [<c1750000>] ? timer_cpu_notify+0xd6/0x20d
<7>[   47.611253]  [<c1050780>] ? __init_kthread_worker+0x60/0x60
<7>[   47.611258]  [<c176357e>] kernel_thread_helper+0x6/0xd
<7>[   47.611283] ------------[ cut here ]------------

This patch changes hub_quiesce behavior to flush the TT clear work
instead of canceling it, to make sure that no TT clear request remains
uncompleted before suspend.

Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agousb-storage: add unusual_devs entry for Casio EX-N1 digital camera
Michael Shigorin [Mon, 22 Oct 2012 09:18:56 +0000 (12:18 +0300)]
usb-storage: add unusual_devs entry for Casio EX-N1 digital camera

commit d7870af7e2e3a91b462075ec1ca669b482215187 upstream.

This commit sets removable subclass for Casio EX-N1 digital camera.

The patch has been tested within an ALT Linux kernel:
http://git.altlinux.org/people/led/packages/?p=kernel-image-3.0.git;a=commitdiff;h=c0fd891836e89fe0c93a4d536a59216d90e4e3e7

See also https://bugzilla.kernel.org/show_bug.cgi?id=49221

Signed-off-by: Oleksandr Chumachenko <ledest@gmail.com>
Signed-off-by: Michael Shigorin <mike@osdn.org.ua>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoehci: Add yet-another Lucid nohandoff pci quirk
Anisse Astier [Tue, 9 Oct 2012 10:22:37 +0000 (12:22 +0200)]
ehci: Add yet-another Lucid nohandoff pci quirk

commit 8daf8b6086f9d575200cd0aa3797e26137255609 upstream.

Board name changed on another shipping Lucid tablet.

Signed-off-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoehci: fix Lucid nohandoff pci quirk to be more generic with BIOS versions
Anisse Astier [Tue, 9 Oct 2012 10:22:36 +0000 (12:22 +0200)]
ehci: fix Lucid nohandoff pci quirk to be more generic with BIOS versions

commit c323dc023b9501e5d09582ec7efd1d40a9001d99 upstream.

BIOS vendors keep changing the BIOS versions. Only match the beginning
of the string to match all Lucid tablets with board name M11JB.

Signed-off-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agosysfs: sysfs_pathname/sysfs_add_one: Use strlcat() instead of strcat()
Geert Uytterhoeven [Sat, 29 Sep 2012 20:23:19 +0000 (22:23 +0200)]
sysfs: sysfs_pathname/sysfs_add_one: Use strlcat() instead of strcat()

commit 66081a72517a131430dcf986775f3268aafcb546 upstream.

The warning check for duplicate sysfs entries can cause a buffer overflow
when printing the warning, as strcat() doesn't check buffer sizes.
Use strlcat() instead.

Since strlcat() doesn't return a pointer to the passed buffer, unlike
strcat(), I had to convert the nested concatenation in sysfs_add_one() to
an admittedly more obscure comma operator construct, to avoid emitting code
for the concatenation if CONFIG_BUG is disabled.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoSUNRPC: Prevent races in xs_abort_connection()
Trond Myklebust [Tue, 23 Oct 2012 21:50:07 +0000 (17:50 -0400)]
SUNRPC: Prevent races in xs_abort_connection()

commit 4bc1e68ed6a8b59be8a79eb719be515a55c7bc68 upstream.

The call to xprt_disconnect_done() that is triggered by a successful
connection reset will trigger another automatic wakeup of all tasks
on the xprt->pending rpc_wait_queue. In particular it will cause an
early wake up of the task that called xprt_connect().

All we really want to do here is clear all the socket-specific state
flags, so we split that functionality out of xs_sock_mark_closed()
into a helper that can be called by xs_abort_connection()

Reported-by: Chris Perl <chris.perl@gmail.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Tested-by: Chris Perl <chris.perl@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoRevert "SUNRPC: Ensure we close the socket on EPIPE errors too..."
Trond Myklebust [Tue, 23 Oct 2012 15:40:02 +0000 (11:40 -0400)]
Revert "SUNRPC: Ensure we close the socket on EPIPE errors too..."

commit b9d2bb2ee537424a7f855e1f93eed44eb9ee0854 upstream.

This reverts commit 55420c24a0d4d1fce70ca713f84aa00b6b74a70e.
Now that we clear the connected flag when entering TCP_CLOSE_WAIT,
the deadlock described in this commit is no longer possible.
Instead, the resulting call to xs_tcp_shutdown() can interfere
with pending reconnection attempts.

Reported-by: Chris Perl <chris.perl@gmail.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Tested-by: Chris Perl <chris.perl@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoSUNRPC: Clear the connect flag when socket state is TCP_CLOSE_WAIT
Trond Myklebust [Tue, 23 Oct 2012 15:35:47 +0000 (11:35 -0400)]
SUNRPC: Clear the connect flag when socket state is TCP_CLOSE_WAIT

commit d0bea455dd48da1ecbd04fedf00eb89437455fdc upstream.

This is needed to ensure that we call xprt_connect() upon the next
call to call_connect().

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Tested-by: Chris Perl <chris.perl@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoSUNRPC: Get rid of the xs_error_report socket callback
Trond Myklebust [Mon, 22 Oct 2012 21:14:36 +0000 (17:14 -0400)]
SUNRPC: Get rid of the xs_error_report socket callback

commit f878b657ce8e7d3673afe48110ec208a29e38c4a upstream.

Chris Perl reports that we're seeing races between the wakeup call in
xs_error_report and the connect attempts. Basically, Chris has shown
that in certain circumstances, the call to xs_error_report causes the
rpc_task that is responsible for reconnecting to wake up early, thus
triggering a disconnect and retry.

Since the sk->sk_error_report() calls in the socket layer are always
followed by a tcp_done() in the cases where we care about waking up
the rpc_tasks, just let the state_change callbacks take responsibility
for those wake ups.

Reported-by: Chris Perl <chris.perl@gmail.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Tested-by: Chris Perl <chris.perl@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoARM: 7559/1: smp: switch away from the idmap before updating init_mm.mm_count
Will Deacon [Fri, 19 Oct 2012 16:53:01 +0000 (17:53 +0100)]
ARM: 7559/1: smp: switch away from the idmap before updating init_mm.mm_count

commit 5f40b909728ad784eb43aa309d3c4e9bdf050781 upstream.

When booting a secondary CPU, the primary CPU hands two sets of page
tables via the secondary_data struct:

(1) swapper_pg_dir: a normal, cacheable, shared (if SMP) mapping
    of the kernel image (i.e. the tables used by init_mm).

(2) idmap_pgd: an uncached mapping of the .idmap.text ELF
    section.

The idmap is generally used when enabling and disabling the MMU, which
includes early CPU boot. In this case, the secondary CPU switches to
swapper as soon as it enters C code:

struct mm_struct *mm = &init_mm;
unsigned int cpu = smp_processor_id();

/*
 * All kernel threads share the same mm context; grab a
 * reference and switch to it.
 */
atomic_inc(&mm->mm_count);
current->active_mm = mm;
cpumask_set_cpu(cpu, mm_cpumask(mm));
cpu_switch_mm(mm->pgd, mm);

This causes a problem on ARMv7, where the identity mapping is treated as
strongly-ordered leading to architecturally UNPREDICTABLE behaviour of
exclusive accesses, such as those used by atomic_inc.

This patch re-orders the secondary_start_kernel function so that we
switch to swapper before performing any exclusive accesses.

Reported-by: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>
Cc: David McKay <david.mckay@st.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agogenalloc: stop crashing the system when destroying a pool
Thadeu Lima de Souza Cascardo [Thu, 25 Oct 2012 20:37:51 +0000 (13:37 -0700)]
genalloc: stop crashing the system when destroying a pool

commit eedce141cd2dad8d0cefc5468ef41898949a7031 upstream.

The genalloc code uses the bitmap API from include/linux/bitmap.h and
lib/bitmap.c, which is based on long values.  Both bitmap_set from
lib/bitmap.c and bitmap_set_ll, which is the lockless version from
genalloc.c, use BITMAP_LAST_WORD_MASK to set the first bits in a long in
the bitmap.

That one uses (1 << bits) - 1, 0b111, if you are setting the first three
bits.  This means that the API counts from the least significant bits
(LSB from now on) to the MSB.  The LSB in the first long is bit 0, then.
The same works for the lookup functions.

The genalloc code uses longs for the bitmap, as it should.  In
include/linux/genalloc.h, struct gen_pool_chunk has unsigned long
bits[0] as its last member.  When allocating the struct, genalloc should
reserve enough space for the bitmap.  This should be a proper number of
longs that can fit the amount of bits in the bitmap.

However, genalloc allocates an integer number of bytes that fit the
amount of bits, but may not be an integer amount of longs.  9 bytes, for
example, could be allocated for 70 bits.

This is a problem in itself if the Least Significat Bit in a long is in
the byte with the largest address, which happens in Big Endian machines.
This means genalloc is not allocating the byte in which it will try to
set or check for a bit.

This may end up in memory corruption, where genalloc will try to set the
bits it has not allocated.  In fact, genalloc may not set these bits
because it may find them already set, because they were not zeroed since
they were not allocated.  And that's what causes a BUG when
gen_pool_destroy is called and check for any set bits.

What really happens is that genalloc uses kmalloc_node with __GFP_ZERO
on gen_pool_add_virt.  With SLAB and SLUB, this means the whole slab
will be cleared, not only the requested bytes.  Since struct
gen_pool_chunk has a size that is a multiple of 8, and slab sizes are
multiples of 8, we get lucky and allocate and clear the right amount of
bytes.

Hower, this is not the case with SLOB or with older code that did memset
after allocating instead of using __GFP_ZERO.

So, a simple module as this (running 3.6.0), will cause a crash when
rmmod'ed.

  [root@phantom-lp2 foo]# cat foo.c
  #include <linux/kernel.h>
  #include <linux/module.h>
  #include <linux/init.h>
  #include <linux/genalloc.h>

  MODULE_LICENSE("GPL");
  MODULE_VERSION("0.1");

  static struct gen_pool *foo_pool;

  static __init int foo_init(void)
  {
          int ret;
          foo_pool = gen_pool_create(10, -1);
          if (!foo_pool)
                  return -ENOMEM;
          ret = gen_pool_add(foo_pool, 0xa0000000, 32 << 10, -1);
          if (ret) {
                  gen_pool_destroy(foo_pool);
                  return ret;
          }
          return 0;
  }

  static __exit void foo_exit(void)
  {
          gen_pool_destroy(foo_pool);
  }

  module_init(foo_init);
  module_exit(foo_exit);
  [root@phantom-lp2 foo]# zcat /proc/config.gz | grep SLOB
  CONFIG_SLOB=y
  [root@phantom-lp2 foo]# insmod ./foo.ko
  [root@phantom-lp2 foo]# rmmod foo
  ------------[ cut here ]------------
  kernel BUG at lib/genalloc.c:243!
  cpu 0x4: Vector: 700 (Program Check) at [c0000000bb0e7960]
      pc: c0000000003cb50c: .gen_pool_destroy+0xac/0x110
      lr: c0000000003cb4fc: .gen_pool_destroy+0x9c/0x110
      sp: c0000000bb0e7be0
     msr: 8000000000029032
    current = 0xc0000000bb0e0000
    paca    = 0xc000000006d30e00   softe: 0        irq_happened: 0x01
      pid   = 13044, comm = rmmod
  kernel BUG at lib/genalloc.c:243!
  [c0000000bb0e7ca0d000000004b00020 .foo_exit+0x20/0x38 [foo]
  [c0000000bb0e7d20c0000000000dff98 .SyS_delete_module+0x1a8/0x290
  [c0000000bb0e7e30c0000000000097d4 syscall_exit+0x0/0x94
  --- Exception: c00 (System Call) at 000000800753d1a0
  SP (fffd0b0e640) is in userspace

Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Benjamin Gaignard <benjamin.gaignard@stericsson.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agodrivers/rtc/rtc-imxdi.c: add missing spin lock initialization
Jan Luebbe [Thu, 25 Oct 2012 20:38:11 +0000 (13:38 -0700)]
drivers/rtc/rtc-imxdi.c: add missing spin lock initialization

commit fee0de7791f967c2c5f0d43eb7b7261761b45e64 upstream.

Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Roland Stigge <stigge@antcom.de>
Cc: Grant Likely <grant.likely@secretlab.ca>
Tested-by: Roland Stigge <stigge@antcom.de>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agofs/compat_ioctl.c: VIDEO_SET_SPU_PALETTE missing error check
Kees Cook [Thu, 25 Oct 2012 20:38:16 +0000 (13:38 -0700)]
fs/compat_ioctl.c: VIDEO_SET_SPU_PALETTE missing error check

commit 12176503366885edd542389eed3aaf94be163fdb upstream.

The compat ioctl for VIDEO_SET_SPU_PALETTE was missing an error check
while converting ioctl arguments.  This could lead to leaking kernel
stack contents into userspace.

Patch extracted from existing fix in grsecurity.

Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: David Miller <davem@davemloft.net>
Cc: Brad Spengler <spender@grsecurity.net>
Cc: PaX Team <pageexec@freemail.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agogen_init_cpio: avoid stack overflow when expanding
Kees Cook [Thu, 25 Oct 2012 20:38:14 +0000 (13:38 -0700)]
gen_init_cpio: avoid stack overflow when expanding

commit 20f1de659b77364d55d4e7fad2ef657e7730323f upstream.

Fix possible overflow of the buffer used for expanding environment
variables when building file list.

In the extremely unlikely case of an attacker having control over the
environment variables visible to gen_init_cpio, control over the
contents of the file gen_init_cpio parses, and gen_init_cpio was built
without compiler hardening, the attacker can gain arbitrary execution
control via a stack buffer overflow.

  $ cat usr/crash.list
  file foo ${BIG}${BIG}${BIG}${BIG}${BIG}${BIG} 0755 0 0
  $ BIG=$(perl -e 'print "A" x 4096;') ./usr/gen_init_cpio usr/crash.list
  *** buffer overflow detected ***: ./usr/gen_init_cpio terminated

This also replaces the space-indenting with tabs.

Patch based on existing fix extracted from grsecurity.

Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Brad Spengler <spender@grsecurity.net>
Cc: PaX Team <pageexec@freemail.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoLinux 3.0.49
Greg Kroah-Hartman [Sun, 28 Oct 2012 17:03:00 +0000 (10:03 -0700)]
Linux 3.0.49

5 years agoxHCI: handle command after aborting the command ring
Elric Fu [Wed, 27 Jun 2012 08:55:43 +0000 (16:55 +0800)]
xHCI: handle command after aborting the command ring

commit b63f4053cc8aa22a98e3f9a97845afe6c15d0a0d upstream.

According to xHCI spec section 4.6.1.1 and section 4.6.1.2,
after aborting a command on the command ring, xHC will
generate a command completion event with its completion
code set to Command Ring Stopped at least. If a command is
currently executing at the time of aborting a command, xHC
also generate a command completion event with its completion
code set to Command Abort. When the command ring is stopped,
software may remove, add, or rearrage Command Descriptors.

To cancel a command, software will initialize a command
descriptor for the cancel command, and add it into a
cancel_cmd_list of xhci. When the command ring is stopped,
software will find the command trbs described by command
descriptors in cancel_cmd_list and modify it to No Op
command. If software can't find the matched trbs, we can
think it had been finished.

This patch should be backported to kernels as old as 3.0, that contain
the commit 7ed603ecf8b68ab81f4c83097d3063d43ec73bb8 "xhci: Add an
assertion to check for virt_dev=0 bug." That commit papers over a NULL
pointer dereference, and this patch fixes the underlying issue that
caused the NULL pointer dereference.

Note from Sarah: The TRB_TYPE_LINK_LE32 macro is not in the 3.0 stable
kernel, so I added it to this patch.

Signed-off-by: Elric Fu <elricfu1@gmail.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Tested-by: Miroslav Sabljic <miroslav.sabljic@avl.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoxHCI: cancel command after command timeout
Elric Fu [Wed, 27 Jun 2012 08:31:52 +0000 (16:31 +0800)]
xHCI: cancel command after command timeout

commit 6e4468b9a0793dfb53eb80d9fe52c739b13b27fd upstream.

The patch is used to cancel command when the command isn't
acknowledged and a timeout occurs.

This patch should be backported to kernels as old as 3.0, that contain
the commit 7ed603ecf8b68ab81f4c83097d3063d43ec73bb8 "xhci: Add an
assertion to check for virt_dev=0 bug." That commit papers over a NULL
pointer dereference, and this patch fixes the underlying issue that
caused the NULL pointer dereference.

Signed-off-by: Elric Fu <elricfu1@gmail.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Tested-by: Miroslav Sabljic <miroslav.sabljic@avl.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoxHCI: add aborting command ring function
Elric Fu [Wed, 27 Jun 2012 08:31:12 +0000 (16:31 +0800)]
xHCI: add aborting command ring function

commit b92cc66c047ff7cf587b318fe377061a353c120f upstream.

Software have to abort command ring and cancel command
when a command is failed or hang. Otherwise, the command
ring will hang up and can't handle the others. An example
of a command that may hang is the Address Device Command,
because waiting for a SET_ADDRESS request to be acknowledged
by a USB device is outside of the xHC's ability to control.

To cancel a command, software will initialize a command
descriptor for the cancel command, and add it into a
cancel_cmd_list of xhci.

Sarah: Fixed missing newline on "Have the command ring been stopped?"
debugging statement.

This patch should be backported to kernels as old as 3.0, that contain
the commit 7ed603ecf8b68ab81f4c83097d3063d43ec73bb8 "xhci: Add an
assertion to check for virt_dev=0 bug." That commit papers over a NULL
pointer dereference, and this patch fixes the underlying issue that
caused the NULL pointer dereference.

Signed-off-by: Elric Fu <elricfu1@gmail.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Tested-by: Miroslav Sabljic <miroslav.sabljic@avl.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoxHCI: add cmd_ring_state
Elric Fu [Wed, 27 Jun 2012 08:30:57 +0000 (16:30 +0800)]
xHCI: add cmd_ring_state

commit c181bc5b5d5c79b71203cd10cef97f802fb6f9c1 upstream.

Adding cmd_ring_state for command ring. It helps to verify
the current command ring state for controlling the command
ring operations.

This patch should be backported to kernels as old as 3.0.  The commit
7ed603ecf8b68ab81f4c83097d3063d43ec73bb8 "xhci: Add an assertion to
check for virt_dev=0 bug." papers over the NULL pointer dereference that
I now believe is related to a timed out Set Address command.  This (and
the four patches that follow it) contain the real fix that also allows
VIA USB 3.0 hubs to consistently re-enumerate during the plug/unplug
stress tests.

Signed-off-by: Elric Fu <elricfu1@gmail.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Tested-by: Miroslav Sabljic <miroslav.sabljic@avl.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agosparc64: Be less verbose during vmemmap population.
David S. Miller [Wed, 15 Aug 2012 07:37:29 +0000 (00:37 -0700)]
sparc64: Be less verbose during vmemmap population.

[ Upstream commit 2856cc2e4d0852c3ddaae9dcb19cb9396512eb08 ]

On a 2-node machine with 256GB of ram we get 512 lines of
console output, which is just too much.

This mimicks Yinghai Lu's x86 commit c2b91e2eec9678dbda274e906cc32ea8f711da3b
(x86_64/mm: check and print vmemmap allocation continuous) except that
we aren't ever going to get contiguous block pointers in between calls
so just print when the virtual address or node changes.

This decreases the output by an order of 16.

Also demote this to KERN_DEBUG.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agosparc64: do not clobber personality flags in sys_sparc64_personality()
Jiri Kosina [Wed, 1 Aug 2012 19:10:51 +0000 (21:10 +0200)]
sparc64: do not clobber personality flags in sys_sparc64_personality()

[ Upstream commit a27032eee8cb6e16516f13c8a9752e9d5d4cc430 ]

There are multiple errors in how sys_sparc64_personality() handles
personality flags stored in top three bytes.

- directly comparing current->personality against PER_LINUX32 doesn't work
  in cases when any of the personality flags stored in the top three bytes
  are used.
- directly forcefully setting personality to PER_LINUX32 or PER_LINUX
  discards any flags stored in the top three bytes

Fix the first one by properly using personality() macro to compare only
PER_MASK bytes.
Fix the second one by setting only the bits that should be set, instead of
overwriting the whole value.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agosparc64: Fix bit twiddling in sparc_pmu_enable_event().
David S. Miller [Tue, 16 Oct 2012 20:05:25 +0000 (13:05 -0700)]
sparc64: Fix bit twiddling in sparc_pmu_enable_event().

[ Upstream commit e793d8c6740f8fe704fa216e95685f4d92c4c4b9 ]

There was a serious disconnect in the logic happening in
sparc_pmu_disable_event() vs. sparc_pmu_enable_event().

Event disable is implemented by programming a NOP event into the PCR.

However, event enable was not reversing this operation.  Instead, it
was setting the User/Priv/Hypervisor trace enable bits.

That's not sparc_pmu_enable_event()'s job, that's what
sparc_pmu_enable() and sparc_pmu_disable() do .

The intent of sparc_pmu_enable_event() is clear, since it first clear
out the event type encoding field.  So fix this by OR'ing in the event
encoding rather than the trace enable bits.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agosparc64: Like x86 we should check current->mm during perf backtrace generation.
David S. Miller [Mon, 15 Oct 2012 00:59:40 +0000 (17:59 -0700)]
sparc64: Like x86 we should check current->mm during perf backtrace generation.

[ Upstream commit 08280e6c4c2e8049ac61d9e8e3536ec1df629c0d ]

If the MM is not active, only report the top-level PC.  Do not try to
access the address space.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agosparc64: fix ptrace interaction with force_successful_syscall_return()
Al Viro [Thu, 11 Oct 2012 00:25:00 +0000 (17:25 -0700)]
sparc64: fix ptrace interaction with force_successful_syscall_return()

[ Upstream commit 55c2770e413e96871147b9406a9c41fe9bc5209c ]

we want syscall_trace_leave() called on exit from any syscall;
skipping its call in case we'd done force_successful_syscall_return()
is broken...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agotcp: resets are misrouted
Alexey Kuznetsov [Fri, 12 Oct 2012 04:34:17 +0000 (04:34 +0000)]
tcp: resets are misrouted

[ Upstream commit 4c67525849e0b7f4bd4fab2487ec9e43ea52ef29 ]

After commit e2446eaa ("tcp_v4_send_reset: binding oif to iif in no
sock case").. tcp resets are always lost, when routing is asymmetric.
Yes, backing out that patch will result in misrouting of resets for
dead connections which used interface binding when were alive, but we
actually cannot do anything here.  What's died that's died and correct
handling normal unbound connections is obviously a priority.

Comment to comment:
> This has few benefits:
>   1. tcp_v6_send_reset already did that.

It was done to route resets for IPv6 link local addresses. It was a
mistake to do so for global addresses. The patch fixes this as well.

Actually, the problem appears to be even more serious than guaranteed
loss of resets.  As reported by Sergey Soloviev <sol@eqv.ru>, those
misrouted resets create a lot of arp traffic and huge amount of
unresolved arp entires putting down to knees NAT firewalls which use
asymmetric routing.

Signed-off-by: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoRDS: fix rds-ping spinlock recursion
jeff.liu [Mon, 8 Oct 2012 18:57:27 +0000 (18:57 +0000)]
RDS: fix rds-ping spinlock recursion

[ Upstream commit 5175a5e76bbdf20a614fb47ce7a38f0f39e70226 ]

This is the revised patch for fixing rds-ping spinlock recursion
according to Venkat's suggestions.

RDS ping/pong over TCP feature has been broken for years(2.6.39 to
3.6.0) since we have to set TCP cork and call kernel_sendmsg() between
ping/pong which both need to lock "struct sock *sk". However, this
lock has already been hold before rds_tcp_data_ready() callback is
triggerred. As a result, we always facing spinlock resursion which
would resulting in system panic.

Given that RDS ping is only used to test the connectivity and not for
serious performance measurements, we can queue the pong transmit to
rds_wq as a delayed response.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
CC: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com>
CC: David S. Miller <davem@davemloft.net>
CC: James Morris <james.l.morris@oracle.com>
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoskge: Add DMA mask quirk for Marvell 88E8001 on ASUS P5NSLI motherboard
Graham Gower [Mon, 8 Oct 2012 08:34:50 +0000 (08:34 +0000)]
skge: Add DMA mask quirk for Marvell 88E8001 on ASUS P5NSLI motherboard

[ Upstream commit a2af139ff1cd85df586690ff626619ab1ee88b0a ]

Marvell 88E8001 on an ASUS P5NSLI motherboard is unable to send/receive
packets on a system with >4gb ram unless a 32bit DMA mask is used.

This issue has been around for years and a fix was sent 3.5 years ago, but
there was some debate as to whether it should instead be fixed as a PCI quirk.
http://www.spinics.net/lists/netdev/msg88670.html

However, 18 months later a similar workaround was introduced for another
chipset exhibiting the same problem.
http://www.spinics.net/lists/netdev/msg142287.html

Signed-off-by: Graham Gower <graham.gower@gmail.com>
Signed-off-by: Jan Ceuleers <jan.ceuleers@computer.org>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agonet: Fix skb_under_panic oops in neigh_resolve_output
ramesh.nagappa@gmail.com [Fri, 5 Oct 2012 19:10:15 +0000 (19:10 +0000)]
net: Fix skb_under_panic oops in neigh_resolve_output

[ Upstream commit e1f165032c8bade3a6bdf546f8faf61fda4dd01c ]

The retry loop in neigh_resolve_output() and neigh_connected_output()
call dev_hard_header() with out reseting the skb to network_header.
This causes the retry to fail with skb_under_panic. The fix is to
reset the network_header within the retry loop.

Signed-off-by: Ramesh Nagappa <ramesh.nagappa@ericsson.com>
Reviewed-by: Shawn Lu <shawn.lu@ericsson.com>
Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
Reviewed-by: Billie Alsup <billie.alsup@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agodrm/i915: apply timing generator bug workaround on CPT and PPT
Jesse Barnes [Wed, 27 Jul 2011 18:51:40 +0000 (11:51 -0700)]
drm/i915: apply timing generator bug workaround on CPT and PPT

commit 3bcf603f6d5d18bd9d076dc280de71f48add4101 upstream.

On CougarPoint and PantherPoint PCH chips, the timing generator may fail
to start after DP training completes.  This is due to a bug in the
FDI autotraining detect logic (which will stall the timing generator and
re-enable it once training completes), so disable it to avoid silent DP
mode setting failures.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Timo Aaltonen <timo.aaltonen@canonical.com>
5 years agomedia: au0828: fix case where STREAMOFF being called on stopped stream causes BUG()
Devin Heitmueller [Tue, 7 Aug 2012 01:47:03 +0000 (22:47 -0300)]
media: au0828: fix case where STREAMOFF being called on stopped stream causes BUG()

commit a595c1ce4c9d572cf53513570b9f1a263d7867f2 upstream.

We weren't checking whether the resource was in use before calling
res_free(), so applications which called STREAMOFF on a v4l2 device that
wasn't already streaming would cause a BUG() to be hit (MythTV).

Reported-by: Larry Finger <larry.finger@lwfinger.net>
Reported-by: Jay Harbeston <jharbestonus@gmail.com>
Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
5 years agoamd64_edac:__amd64_set_scrub_rate(): avoid overindexing scrubrates[]
Andrew Morton [Tue, 23 Oct 2012 21:09:39 +0000 (14:09 -0700)]
amd64_edac:__amd64_set_scrub_rate(): avoid overindexing scrubrates[]

commit 168bfeef7bba3f9784f7540b053e4ac72b769ce9 upstream.

If none of the elements in scrubrates[] matches, this loop will cause
__amd64_set_scrub_rate() to incorrectly use the n+1th element.

As the function is designed to use the final scrubrates[] element in the
case of no match, we can fix this bug by simply terminating the array
search at the n-1th element.

Boris: this code is fragile anyway, see here why:
http://marc.info/?l=linux-kernel&m=135102834131236&w=2

It will be rewritten more robustly soonish.

Reported-by: Denis Kirjanov <kirjanov@gmail.com>
Cc: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agocgroup: notify_on_release may not be triggered in some cases
Daisuke Nishimura [Thu, 4 Oct 2012 07:37:16 +0000 (16:37 +0900)]
cgroup: notify_on_release may not be triggered in some cases

commit 1f5320d5972aa50d3e8d2b227b636b370e608359 upstream.

notify_on_release must be triggered when the last process in a cgroup is
move to another. But if the first(and only) process in a cgroup is moved to
another, notify_on_release is not triggered.

# mkdir /cgroup/cpu/SRC
# mkdir /cgroup/cpu/DST
#
# echo 1 >/cgroup/cpu/SRC/notify_on_release
# echo 1 >/cgroup/cpu/DST/notify_on_release
#
# sleep 300 &
[1] 8629
#
# echo 8629 >/cgroup/cpu/SRC/tasks
# echo 8629 >/cgroup/cpu/DST/tasks
-> notify_on_release for /SRC must be triggered at this point,
   but it isn't.

This is because put_css_set() is called before setting CGRP_RELEASABLE
in cgroup_task_migrate(), and is a regression introduce by the
commit:74a1166d(cgroups: make procs file writable), which was merged
into v3.0.

Acked-by: Li Zefan <lizefan@huawei.com>
Cc: Ben Blum <bblum@andrew.cmu.edu>
Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoUSB: option: add more ZTE devices
Bjørn Mork [Thu, 18 Oct 2012 15:14:17 +0000 (17:14 +0200)]
USB: option: add more ZTE devices

commit 4b35f1c52943851b310afb09047bfe991ac8f5ae upstream.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoUSB: option: blacklist net interface on ZTE devices
Bjørn Mork [Thu, 18 Oct 2012 15:19:53 +0000 (17:19 +0200)]
USB: option: blacklist net interface on ZTE devices

commit 1452df6f1b7e396d89c2a1fdbdc0e0e839f97671 upstream.

Based on information from the ZTE Windows drivers.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agousb: acm: fix the computation of the number of data bits
Nicolas Boullis [Mon, 15 Oct 2012 22:06:23 +0000 (00:06 +0200)]
usb: acm: fix the computation of the number of data bits

commit 301a29da6e891e7eb95c843af0ecdbe86d01f723 upstream.

The current code assumes that CSIZE is 0000060, which appears to be
wrong on some arches (such as powerpc).

Signed-off-by: Nicolas Boullis <nboullis@debian.org>
Acked-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoUSB: cdc-acm: fix pipe type of write endpoint
Ming Lei [Tue, 16 Oct 2012 13:21:21 +0000 (21:21 +0800)]
USB: cdc-acm: fix pipe type of write endpoint

commit c5211187f7ff8e8dbff4ebf7c011ac4c0ffe319c upstream.

If the write endpoint is interrupt type, usb_sndintpipe() should
be passed to usb_fill_int_urb() instead of usb_sndbulkpipe().

Signed-off-by: Ming Lei <ming.lei@canonical.com>
Cc: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoxen/x86: don't corrupt %eip when returning from a signal handler
David Vrabel [Fri, 19 Oct 2012 16:29:07 +0000 (17:29 +0100)]
xen/x86: don't corrupt %eip when returning from a signal handler

commit a349e23d1cf746f8bdc603dcc61fae9ee4a695f6 upstream.

In 32 bit guests, if a userspace process has %eax == -ERESTARTSYS
(-512) or -ERESTARTNOINTR (-513) when it is interrupted by an event
/and/ the process has a pending signal then %eip (and %eax) are
corrupted when returning to the main process after handling the
signal.  The application may then crash with SIGSEGV or a SIGILL or it
may have subtly incorrect behaviour (depending on what instruction it
returned to).

The occurs because handle_signal() is incorrectly thinking that there
is a system call that needs to restarted so it adjusts %eip and %eax
to re-execute the system call instruction (even though user space had
not done a system call).

If %eax == -514 (-ERESTARTNOHAND (-514) or -ERESTART_RESTARTBLOCK
(-516) then handle_signal() only corrupted %eax (by setting it to
-EINTR).  This may cause the application to crash or have incorrect
behaviour.

handle_signal() assumes that regs->orig_ax >= 0 means a system call so
any kernel entry point that is not for a system call must push a
negative value for orig_ax.  For example, for physical interrupts on
bare metal the inverse of the vector is pushed and page_fault() sets
regs->orig_ax to -1, overwriting the hardware provided error code.

xen_hypervisor_callback() was incorrectly pushing 0 for orig_ax
instead of -1.

Classic Xen kernels pushed %eax which works as %eax cannot be both
non-negative and -RESTARTSYS (etc.), but using -1 is consistent with
other non-system call entry points and avoids some of the tests in
handle_signal().

There were similar bugs in xen_failsafe_callback() of both 32 and
64-bit guests. If the fault was corrected and the normal return path
was used then 0 was incorrectly pushed as the value for orig_ax.

Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Acked-by: Jan Beulich <JBeulich@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agox86: Exclude E820_RESERVED regions and memory holes above 4 GB from direct mapping.
Jacob Shin [Thu, 20 Oct 2011 21:15:26 +0000 (16:15 -0500)]
x86: Exclude E820_RESERVED regions and memory holes above 4 GB from direct mapping.

commit 1bbbbe779aabe1f0768c2bf8f8c0a5583679b54a upstream.

On systems with very large memory (1 TB in our case), BIOS may report a
reserved region or a hole in the E820 map, even above the 4 GB range. Exclude
these from the direct mapping.

[ hpa: this should be done not just for > 4 GB but for everything above the legacy
  region (1 MB), at the very least.  That, however, turns out to require significant
  restructuring.  That work is well underway, but is not suitable for rc/stable. ]

Signed-off-by: Jacob Shin <jacob.shin@amd.com>
Link: http://lkml.kernel.org/r/1319145326-13902-1-git-send-email-jacob.shin@amd.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agouse clamp_t in UNAME26 fix
Kees Cook [Sat, 20 Oct 2012 01:45:53 +0000 (18:45 -0700)]
use clamp_t in UNAME26 fix

commit 31fd84b95eb211d5db460a1dda85e004800a7b52 upstream.

The min/max call needed to have explicit types on some architectures
(e.g. mn10300). Use clamp_t instead to avoid the warning:

  kernel/sys.c: In function 'override_release':
  kernel/sys.c:1287:10: warning: comparison of distinct pointer types lacks a cast [enabled by default]

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agokernel/sys.c: fix stack memory content leak via UNAME26
Kees Cook [Fri, 19 Oct 2012 20:56:51 +0000 (13:56 -0700)]
kernel/sys.c: fix stack memory content leak via UNAME26

commit 2702b1526c7278c4d65d78de209a465d4de2885e upstream.

Calling uname() with the UNAME26 personality set allows a leak of kernel
stack contents.  This fixes it by defensively calculating the length of
copy_to_user() call, making the len argument unsigned, and initializing
the stack buffer to zero (now technically unneeded, but hey, overkill).

CVE-2012-0957

Reported-by: PaX Team <pageexec@freemail.hu>
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: PaX Team <pageexec@freemail.hu>
Cc: Brad Spengler <spender@grsecurity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agopcmcia: sharpsl: don't discard sharpsl_pcmcia_ops
Arnd Bergmann [Mon, 30 Apr 2012 13:50:56 +0000 (13:50 +0000)]
pcmcia: sharpsl: don't discard sharpsl_pcmcia_ops

commit fdc858a466b738d35d3492bc7cf77b1dac98bf7c upstream.

The sharpsl_pcmcia_ops structure gets passed into
sa11xx_drv_pcmcia_probe, where it gets accessed at run-time,
unlike all other pcmcia drivers that pass their structures
into platform_device_add_data, which makes a copy.

This means the gcc warning is valid and the structure
must not be marked as __initdata.

Without this patch, building collie_defconfig results in:

drivers/pcmcia/pxa2xx_sharpsl.c:22:31: fatal error: mach-pxa/hardware.h: No such file or directory
compilation terminated.
make[3]: *** [drivers/pcmcia/pxa2xx_sharpsl.o] Error 1
make[2]: *** [drivers/pcmcia] Error 2
make[1]: *** [drivers] Error 2
make: *** [sub-make] Error 2

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Pavel Machek <pavel@suse.cz>
Cc: linux-pcmcia@lists.infradead.org
Cc: Jochen Friedrich <jochen@scram.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoRevert: lockd: use rpc client's cl_nodename for id encoding
Greg Kroah-Hartman [Tue, 18 Sep 2012 09:37:18 +0000 (13:37 +0400)]
Revert: lockd: use rpc client's cl_nodename for id encoding

This reverts 12d63702c53bc2230dfc997e91ca891f39cb6446 which was commit
303a7ce92064c285a04c870f2dc0192fdb2968cb upstream.

Taking hostname from uts namespace if not safe, because this cuold be
performind during umount operation on child reaper death. And in this case
current->nsproxy is NULL already.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Stanislav Kinsbursky <skinsbursky@parallels.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
5 years agoSUNRPC: Prevent kernel stack corruption on long values of flush
Sasha Levin [Mon, 16 Jul 2012 22:01:26 +0000 (00:01 +0200)]
SUNRPC: Prevent kernel stack corruption on long values of flush

commit 212ba90696ab4884e2025b0b13726d67aadc2cd4 upstream.

The buffer size in read_flush() is too small for the longest possible values
for it. This can lead to a kernel stack corruption:

[   43.047329] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: ffffffff833e64b4
[   43.047329]
[   43.049030] Pid: 6015, comm: trinity-child18 Tainted: G        W    3.5.0-rc7-next-20120716-sasha #221
[   43.050038] Call Trace:
[   43.050435]  [<ffffffff836c60c2>] panic+0xcd/0x1f4
[   43.050931]  [<ffffffff833e64b4>] ? read_flush.isra.7+0xe4/0x100
[   43.051602]  [<ffffffff810e94e6>] __stack_chk_fail+0x16/0x20
[   43.052206]  [<ffffffff833e64b4>] read_flush.isra.7+0xe4/0x100
[   43.052951]  [<ffffffff833e6500>] ? read_flush_pipefs+0x30/0x30
[   43.053594]  [<ffffffff833e652c>] read_flush_procfs+0x2c/0x30
[   43.053596]  [<ffffffff812b9a8c>] proc_reg_read+0x9c/0xd0
[   43.053596]  [<ffffffff812b99f0>] ? proc_reg_write+0xd0/0xd0
[   43.053596]  [<ffffffff81250d5b>] do_loop_readv_writev+0x4b/0x90
[   43.053596]  [<ffffffff81250fd6>] do_readv_writev+0xf6/0x1d0
[   43.053596]  [<ffffffff812510ee>] vfs_readv+0x3e/0x60
[   43.053596]  [<ffffffff812511b8>] sys_readv+0x48/0xb0
[   43.053596]  [<ffffffff8378167d>] system_call_fastpath+0x1a/0x1f

Signed-off-by: Sasha Levin <levinsasha928@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agooprofile, x86: Fix wrapping bug in op_x86_get_ctrl()
Dan Carpenter [Wed, 10 Oct 2012 07:18:35 +0000 (10:18 +0300)]
oprofile, x86: Fix wrapping bug in op_x86_get_ctrl()

commit 44009105081b51417f311f4c3be0061870b6b8ed upstream.

The "event" variable is a u16 so the shift will always wrap to zero
making the line a no-op.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoNLM: nlm_lookup_file() may return NLMv4-specific error codes
Trond Myklebust [Sat, 13 Oct 2012 04:30:28 +0000 (00:30 -0400)]
NLM: nlm_lookup_file() may return NLMv4-specific error codes

commit cd0b16c1c3cda12dbed1f8de8f1a9b0591990724 upstream.

If the filehandle is stale, or open access is denied for some reason,
nlm_fopen() may return one of the NLMv4-specific error codes nlm4_stale_fh
or nlm4_failed. These get passed right through nlm_lookup_file(),
and so when nlmsvc_retrieve_args() calls the latter, it needs to filter
the result through the cast_status() machinery.

Failure to do so, will trigger the BUG_ON() in encode_nlm_stat...

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Reported-by: Larry McVoy <lm@bitmover.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoarch/tile: avoid generating .eh_frame information in modules
Chris Metcalf [Fri, 19 Oct 2012 15:43:11 +0000 (11:43 -0400)]
arch/tile: avoid generating .eh_frame information in modules

commit 627072b06c362bbe7dc256f618aaa63351f0cfe6 upstream.

The tile tool chain uses the .eh_frame information for backtracing.
The vmlinux build drops any .eh_frame sections at link time, but when
present in kernel modules, it causes a module load failure due to the
presence of unsupported pc-relative relocations.  When compiling to
use compiler feedback support, the compiler by default omits .eh_frame
information, so we don't see this problem.  But when not using feedback,
we need to explicitly suppress the .eh_frame.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoLinux 3.0.48
Greg Kroah-Hartman [Mon, 22 Oct 2012 15:36:19 +0000 (08:36 -0700)]
Linux 3.0.48

5 years agoRevert "block: fix request_queue->flags initialization"
Greg Kroah-Hartman [Mon, 22 Oct 2012 15:33:26 +0000 (08:33 -0700)]
Revert "block: fix request_queue->flags initialization"

This reverts commit 2101aa5bb084931f22fa08cacd6d69c80afade7f which is
commit 60ea8226cbd5c8301f9a39edc574ddabcb8150e0 upstream.

To quote Ben:
This is not needed, as there is no QUEUE_FLAG_BYPASS in 3.0.y.

To quote Tejun:
I don't think it will break anything as it simply changes
assignment to |= to avoid overwriting existing flags.  That
said, any patch can break anything, so if possible it would be
better to drop for 3.0.y.

So I'll revert this to be safe.

Cc: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoLinux 3.0.47
Greg Kroah-Hartman [Sun, 21 Oct 2012 16:17:50 +0000 (09:17 -0700)]
Linux 3.0.47

5 years agoALSA: emu10k1: add chip details for E-mu 1010 PCIe card
Maxim Kachur [Wed, 17 Oct 2012 16:18:10 +0000 (18:18 +0200)]
ALSA: emu10k1: add chip details for E-mu 1010 PCIe card

commit 10f571d09106c3eb85951896522c9650596eff2e upstream.

Add chip details for E-mu 1010 PCIe card. It has the same
chip as found in E-mu 1010b but it uses different PCI id.

Signed-off-by: Maxim Kachur <mcdebugger@duganet.ru>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoALSA: ac97 - Fix missing NULL check in snd_ac97_cvol_new()
Takashi Iwai [Thu, 11 Oct 2012 14:43:40 +0000 (16:43 +0200)]
ALSA: ac97 - Fix missing NULL check in snd_ac97_cvol_new()

commit 733a48e5ae5bf28b046fad984d458c747cbb8c21 upstream.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=44721

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoudf: fix retun value on error path in udf_load_logicalvol
Nikola Pajkovsky [Tue, 14 Aug 2012 22:38:08 +0000 (00:38 +0200)]
udf: fix retun value on error path in udf_load_logicalvol

commit 68766a2edcd5cd744262a70a2f67a320ac944760 upstream.

In case we detect a problem and bail out, we fail to set "ret" to a
nonzero value, and udf_load_logicalvol will mistakenly report success.

Signed-off-by: Nikola Pajkovsky <npajkovs@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agotpm: Propagate error from tpm_transmit to fix a timeout hang
Peter Huewe [Thu, 27 Sep 2012 14:09:33 +0000 (16:09 +0200)]
tpm: Propagate error from tpm_transmit to fix a timeout hang

commit abce9ac292e13da367bbd22c1f7669f988d931ac upstream.

tpm_write calls tpm_transmit without checking the return value and
assigns the return value unconditionally to chip->pending_data, even if
it's an error value.
This causes three bugs.

So if we write to /dev/tpm0 with a tpm_param_size bigger than
TPM_BUFSIZE=0x1000 (e.g. 0x100a)
and a bufsize also bigger than TPM_BUFSIZE (e.g. 0x100a)
tpm_transmit returns -E2BIG which is assigned to chip->pending_data as
-7, but tpm_write returns that TPM_BUFSIZE bytes have been successfully
been written to the TPM, altough this is not true (bug #1).

As we did write more than than TPM_BUFSIZE bytes but tpm_write reports
that only TPM_BUFSIZE bytes have been written the vfs tries to write
the remaining bytes (in this case 10 bytes) to the tpm device driver via
tpm_write which then blocks at

 /* cannot perform a write until the read has cleared
 either via tpm_read or a user_read_timer timeout */
 while (atomic_read(&chip->data_pending) != 0)
 msleep(TPM_TIMEOUT);

for 60 seconds, since data_pending is -7 and nobody is able to
read it (since tpm_read luckily checks if data_pending is greater than
0) (#bug 2).

After that the remaining bytes are written to the TPM which are
interpreted by the tpm as a normal command. (bug #3)
So if the last bytes of the command stream happen to be a e.g.
tpm_force_clear this gets accidentally sent to the TPM.

This patch fixes all three bugs, by propagating the error code of
tpm_write and returning -E2BIG if the input buffer is too big,
since the response from the tpm for a truncated value is bogus anyway.
Moreover it returns -EBUSY to userspace if there is a response ready to be
read.

Signed-off-by: Peter Huewe <peter.huewe@infineon.com>
Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agox86, random: Verify RDRAND functionality and allow it to be disabled
H. Peter Anvin [Sun, 31 Jul 2011 21:02:19 +0000 (14:02 -0700)]
x86, random: Verify RDRAND functionality and allow it to be disabled

commit 49d859d78c5aeb998b6936fcb5f288f78d713489 upstream.

If the CPU declares that RDRAND is available, go through a guranteed
reseed sequence, and make sure that it is actually working (producing
data.)   If it does not, disable the CPU feature flag.

Allow RDRAND to be disabled on the command line (as opposed to at
compile time) for a user who has special requirements with regards to
random numbers.

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agox86, random: Architectural inlines to get random integers with RDRAND
H. Peter Anvin [Sun, 31 Jul 2011 20:59:29 +0000 (13:59 -0700)]
x86, random: Architectural inlines to get random integers with RDRAND

commit 628c6246d47b85f5357298601df2444d7f4dd3fd upstream.

Architectural inlines to get random ints and longs using the RDRAND
instruction.

Intel has introduced a new RDRAND instruction, a Digital Random Number
Generator (DRNG), which is functionally an high bandwidth entropy
source, cryptographic whitener, and integrity monitor all built into
hardware.  This enables RDRAND to be used directly, bypassing the
kernel random number pool.

For technical documentation, see:

http://software.intel.com/en-us/articles/download-the-latest-bull-mountain-software-implementation-guide/

In this patch, this is *only* used for the nonblocking random number
pool.  RDRAND is a nonblocking source, similar to our /dev/urandom,
and is therefore not a direct replacement for /dev/random.  The
architectural hooks presented in the previous patch only feed the
kernel internal users, which only use the nonblocking pool, and so
this is not a problem.

Since this instruction is available in userspace, there is no reason
to have a /dev/hw_rng device driver for the purpose of feeding rngd.
This is especially so since RDRAND is a nonblocking source, and needs
additional whitening and reduction (see the above technical
documentation for details) in order to be of "pure entropy source"
quality.

The CONFIG_EXPERT compile-time option can be used to disable this use
of RDRAND.

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Originally-by: Fenghua Yu <fenghua.yu@intel.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agojbd: Fix assertion failure in commit code due to lacking transaction credits
Jan Kara [Wed, 11 Jul 2012 21:16:25 +0000 (23:16 +0200)]
jbd: Fix assertion failure in commit code due to lacking transaction credits

commit 09e05d4805e6c524c1af74e524e5d0528bb3fef3 upstream.

ext3 users of data=journal mode with blocksize < pagesize were occasionally
hitting assertion failure in journal_commit_transaction() checking whether the
transaction has at least as many credits reserved as buffers attached.  The
core of the problem is that when a file gets truncated, buffers that still need
checkpointing or that are attached to the committing transaction are left with
buffer_mapped set. When this happens to buffers beyond i_size attached to a
page stradding i_size, subsequent write extending the file will see these
buffers and as they are mapped (but underlying blocks were freed) things go
awry from here.

The assertion failure just coincidentally (and in this case luckily as we would
start corrupting filesystem) triggers due to journal_head not being properly
cleaned up as well.

Under some rare circumstances this bug could even hit data=ordered mode users.
There the assertion won't trigger and we would end up corrupting the
filesystem.

We fix the problem by unmapping buffers if possible (in lots of cases we just
need a buffer attached to a transaction as a place holder but it must not be
written out anyway). And in one case, we just have to bite the bullet and wait
for transaction commit to finish.

Reviewed-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agodrm/radeon: Don't destroy I2C Bus Rec in radeon_ext_tmds_enc_destroy().
Egbert Eich [Mon, 15 Oct 2012 06:21:39 +0000 (08:21 +0200)]
drm/radeon: Don't destroy I2C Bus Rec in radeon_ext_tmds_enc_destroy().

commit 082918471139b07964967cfe5f70230909c82ae1 upstream.

radeon_i2c_fini() walks thru the list of I2C bus recs rdev->i2c_bus[]
to destroy each of them.
radeon_ext_tmds_enc_destroy() however also has code to destroy it's
associated I2C bus rec which has been obtained by radeon_i2c_lookup()
and is therefore also in the i2c_bus[] list.
This causes a double free resulting in a kernel panic when unloading
the radeon driver.
Removing destroy code from radeon_ext_tmds_enc_destroy() fixes this
problem.

agd5f: fix compiler warning

Signed-off-by: Egbert Eich <eich@suse.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoAdd CDC-ACM support for the CX93010-2x UCMxx USB Modem
Jean-Christian de Rivaz [Wed, 10 Oct 2012 12:49:02 +0000 (12:49 +0000)]
Add CDC-ACM support for the CX93010-2x UCMxx USB Modem

commit e7d491a19d3e3aac544070293891a2542ae0c565 upstream.

This USB V.92/V.32bis Controllered Modem have the USB vendor ID 0x0572
and device ID 0x1340. It need the NO_UNION_NORMAL quirk to be recognized.

Reference:
http://www.conexant.com/servlets/DownloadServlet/DSH-201723-005.pdf?docid=1725&revid=5
See idVendor and idProduct in table 6-1. Device Descriptors

Signed-off-by: Jean-Christian de Rivaz <jc@eclis.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agonetfilter: xt_limit: have r->cost != 0 case work
Jan Engelhardt [Fri, 21 Sep 2012 22:26:52 +0000 (22:26 +0000)]
netfilter: xt_limit: have r->cost != 0 case work

commit 82e6bfe2fbc4d48852114c4f979137cd5bf1d1a8 upstream.

Commit v2.6.19-rc1~1272^2~41 tells us that r->cost != 0 can happen when
a running state is saved to userspace and then reinstated from there.

Make sure that private xt_limit area is initialized with correct values.
Otherwise, random matchings due to use of uninitialized memory.

Signed-off-by: Jan Engelhardt <jengelh@inai.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: David Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agonetfilter: limit, hashlimit: avoid duplicated inline
Florian Westphal [Mon, 7 May 2012 10:51:43 +0000 (10:51 +0000)]
netfilter: limit, hashlimit: avoid duplicated inline

commit 7a909ac70f6b0823d9f23a43f19598d4b57ac901 upstream.

credit_cap can be set to credit, which avoids inlining user2credits
twice. Also, remove inline keyword and let compiler decide.

old:
    684     192       0     876     36c net/netfilter/xt_limit.o
   4927     344      32    5303    14b7 net/netfilter/xt_hashlimit.o
now:
    668     192       0     860     35c net/netfilter/xt_limit.o
   4793     344      32    5169    1431 net/netfilter/xt_hashlimit.o

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: David Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agonetfilter: nf_ct_expect: fix possible access to uninitialized timer
Pablo Neira Ayuso [Thu, 16 Aug 2012 00:25:24 +0000 (02:25 +0200)]
netfilter: nf_ct_expect: fix possible access to uninitialized timer

commit 2614f86490122bf51eb7c12ec73927f1900f4e7d upstream.

In __nf_ct_expect_check, the function refresh_timer returns 1
if a matching expectation is found and its timer is successfully
refreshed. This results in nf_ct_expect_related returning 0.
Note that at this point:

- the passed expectation is not inserted in the expectation table
  and its timer was not initialized, since we have refreshed one
  matching/existing expectation.

- nf_ct_expect_alloc uses kmem_cache_alloc, so the expectation
  timer is in some undefined state just after the allocation,
  until it is appropriately initialized.

This can be a problem for the SIP helper during the expectation
addition:

 ...
 if (nf_ct_expect_related(rtp_exp) == 0) {
         if (nf_ct_expect_related(rtcp_exp) != 0)
                 nf_ct_unexpect_related(rtp_exp);
 ...

Note that nf_ct_expect_related(rtp_exp) may return 0 for the timer refresh
case that is detailed above. Then, if nf_ct_unexpect_related(rtcp_exp)
returns != 0, nf_ct_unexpect_related(rtp_exp) is called, which does:

 spin_lock_bh(&nf_conntrack_lock);
 if (del_timer(&exp->timeout)) {
         nf_ct_unlink_expect(exp);
         nf_ct_expect_put(exp);
 }
 spin_unlock_bh(&nf_conntrack_lock);

Note that del_timer always returns false if the timer has been
initialized.  However, the timer was not initialized since setup_timer
was not called, therefore, the expectation timer remains in some
undefined state. If I'm not missing anything, this may lead to the
removal an unexistent expectation.

To fix this, the optimization that allows refreshing an expectation
is removed. Now nf_conntrack_expect_related looks more consistent
to me since it always add the expectation in case that it returns
success.

Thanks to Patrick McHardy for participating in the discussion of
this patch.

I think this may be the source of the problem described by:
http://marc.info/?l=netfilter-devel&m=134073514719421&w=2

Reported-by: Rafal Fitt <rafalf@aplusc.com.pl>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: David Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agonetfilter: nf_nat_sip: fix via header translation with multiple parameters
Patrick McHardy [Thu, 9 Aug 2012 10:08:47 +0000 (10:08 +0000)]
netfilter: nf_nat_sip: fix via header translation with multiple parameters

commit f22eb25cf5b1157b29ef88c793b71972efc47143 upstream.

Via-headers are parsed beginning at the first character after the Via-address.
When the address is translated first and its length decreases, the offset to
start parsing at is incorrect and header parameters might be missed.

Update the offset after translating the Via-address to fix this.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: David Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoipvs: fix oops on NAT reply in br_nf context
Lin Ming [Sat, 7 Jul 2012 10:26:10 +0000 (18:26 +0800)]
ipvs: fix oops on NAT reply in br_nf context

commit 9e33ce453f8ac8452649802bee1f410319408f4b upstream.

IPVS should not reset skb->nf_bridge in FORWARD hook
by calling nf_reset for NAT replies. It triggers oops in
br_nf_forward_finish.

[  579.781508] BUG: unable to handle kernel NULL pointer dereference at 0000000000000004
[  579.781669] IP: [<ffffffff817b1ca5>] br_nf_forward_finish+0x58/0x112
[  579.781792] PGD 218f9067 PUD 0
[  579.781865] Oops: 0000 [#1] SMP
[  579.781945] CPU 0
[  579.781983] Modules linked in:
[  579.782047]
[  579.782080]
[  579.782114] Pid: 4644, comm: qemu Tainted: G        W    3.5.0-rc5-00006-g95e69f9 #282 Hewlett-Packard  /30E8
[  579.782300] RIP: 0010:[<ffffffff817b1ca5>]  [<ffffffff817b1ca5>] br_nf_forward_finish+0x58/0x112
[  579.782455] RSP: 0018:ffff88007b003a98  EFLAGS: 00010287
[  579.782541] RAX: 0000000000000008 RBX: ffff8800762ead00 RCX: 000000000001670a
[  579.782653] RDX: 0000000000000000 RSI: 000000000000000a RDI: ffff8800762ead00
[  579.782845] RBP: ffff88007b003ac8 R08: 0000000000016630 R09: ffff88007b003a90
[  579.782957] R10: ffff88007b0038e8 R11: ffff88002da37540 R12: ffff88002da01a02
[  579.783066] R13: ffff88002da01a80 R14: ffff88002d83c000 R15: ffff88002d82a000
[  579.783177] FS:  0000000000000000(0000) GS:ffff88007b000000(0063) knlGS:00000000f62d1b70
[  579.783306] CS:  0010 DS: 002b ES: 002b CR0: 000000008005003b
[  579.783395] CR2: 0000000000000004 CR3: 00000000218fe000 CR4: 00000000000027f0
[  579.783505] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  579.783684] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[  579.783795] Process qemu (pid: 4644, threadinfo ffff880021b20000, task ffff880021aba760)
[  579.783919] Stack:
[  579.783959]  ffff88007693cedc ffff8800762ead00 ffff88002da01a02 ffff8800762ead00
[  579.784110]  ffff88002da01a02 ffff88002da01a80 ffff88007b003b18 ffffffff817b26c7
[  579.784260]  ffff880080000000 ffffffff81ef59f0 ffff8800762ead00 ffffffff81ef58b0
[  579.784477] Call Trace:
[  579.784523]  <IRQ>
[  579.784562]
[  579.784603]  [<ffffffff817b26c7>] br_nf_forward_ip+0x275/0x2c8
[  579.784707]  [<ffffffff81704b58>] nf_iterate+0x47/0x7d
[  579.784797]  [<ffffffff817ac32e>] ? br_dev_queue_push_xmit+0xae/0xae
[  579.784906]  [<ffffffff81704bfb>] nf_hook_slow+0x6d/0x102
[  579.784995]  [<ffffffff817ac32e>] ? br_dev_queue_push_xmit+0xae/0xae
[  579.785175]  [<ffffffff8187fa95>] ? _raw_write_unlock_bh+0x19/0x1b
[  579.785179]  [<ffffffff817ac417>] __br_forward+0x97/0xa2
[  579.785179]  [<ffffffff817ad366>] br_handle_frame_finish+0x1a6/0x257
[  579.785179]  [<ffffffff817b2386>] br_nf_pre_routing_finish+0x26d/0x2cb
[  579.785179]  [<ffffffff817b2cf0>] br_nf_pre_routing+0x55d/0x5c1
[  579.785179]  [<ffffffff81704b58>] nf_iterate+0x47/0x7d
[  579.785179]  [<ffffffff817ad1c0>] ? br_handle_local_finish+0x44/0x44
[  579.785179]  [<ffffffff81704bfb>] nf_hook_slow+0x6d/0x102
[  579.785179]  [<ffffffff817ad1c0>] ? br_handle_local_finish+0x44/0x44
[  579.785179]  [<ffffffff81551525>] ? sky2_poll+0xb35/0xb54
[  579.785179]  [<ffffffff817ad62a>] br_handle_frame+0x213/0x229
[  579.785179]  [<ffffffff817ad417>] ? br_handle_frame_finish+0x257/0x257
[  579.785179]  [<ffffffff816e3b47>] __netif_receive_skb+0x2b4/0x3f1
[  579.785179]  [<ffffffff816e69fc>] process_backlog+0x99/0x1e2
[  579.785179]  [<ffffffff816e6800>] net_rx_action+0xdf/0x242
[  579.785179]  [<ffffffff8107e8a8>] __do_softirq+0xc1/0x1e0
[  579.785179]  [<ffffffff8135a5ba>] ? trace_hardirqs_off_thunk+0x3a/0x6c
[  579.785179]  [<ffffffff8188812c>] call_softirq+0x1c/0x30

The steps to reproduce as follow,

1. On Host1, setup brige br0(192.168.1.106)
2. Boot a kvm guest(192.168.1.105) on Host1 and start httpd
3. Start IPVS service on Host1
   ipvsadm -A -t 192.168.1.106:80 -s rr
   ipvsadm -a -t 192.168.1.106:80 -r 192.168.1.105:80 -m
4. Run apache benchmark on Host2(192.168.1.101)
   ab -n 1000 http://192.168.1.106/

ip_vs_reply4
  ip_vs_out
    handle_response
      ip_vs_notrack
        nf_reset()
        {
          skb->nf_bridge = NULL;
        }

Actually, IPVS wants in this case just to replace nfct
with untracked version. So replace the nf_reset(skb) call
in ip_vs_notrack() with a nf_conntrack_put(skb->nfct) call.

Signed-off-by: Lin Ming <mlin@ss.pku.edu.cn>
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: David Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agonetfilter: nf_nat_sip: fix incorrect handling of EBUSY for RTCP expectation
Pablo Neira Ayuso [Wed, 29 Aug 2012 15:24:09 +0000 (15:24 +0000)]
netfilter: nf_nat_sip: fix incorrect handling of EBUSY for RTCP expectation

commit 3f509c689a07a4aa989b426893d8491a7ffcc410 upstream.

We're hitting bug while trying to reinsert an already existing
expectation:

kernel BUG at kernel/timer.c:895!
invalid opcode: 0000 [#1] SMP
[...]
Call Trace:
 <IRQ>
 [<ffffffffa0069563>] nf_ct_expect_related_report+0x4a0/0x57a [nf_conntrack]
 [<ffffffff812d423a>] ? in4_pton+0x72/0x131
 [<ffffffffa00ca69e>] ip_nat_sdp_media+0xeb/0x185 [nf_nat_sip]
 [<ffffffffa00b5b9b>] set_expected_rtp_rtcp+0x32d/0x39b [nf_conntrack_sip]
 [<ffffffffa00b5f15>] process_sdp+0x30c/0x3ec [nf_conntrack_sip]
 [<ffffffff8103f1eb>] ? irq_exit+0x9a/0x9c
 [<ffffffffa00ca738>] ? ip_nat_sdp_media+0x185/0x185 [nf_nat_sip]

We have to remove the RTP expectation if the RTCP expectation hits EBUSY
since we keep trying with other ports until we succeed.

Reported-by: Rafal Fitt <rafalf@aplusc.com.pl>
Acked-by: David Miller <davem@davemloft.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agonetfilter: nf_ct_ipv4: packets with wrong ihl are invalid
Jozsef Kadlecsik [Tue, 3 Apr 2012 20:02:01 +0000 (22:02 +0200)]
netfilter: nf_ct_ipv4: packets with wrong ihl are invalid

commit 07153c6ec074257ade76a461429b567cff2b3a1e upstream.

It was reported that the Linux kernel sometimes logs:

klogd: [2629147.402413] kernel BUG at net / netfilter /
nf_conntrack_proto_tcp.c: 447!
klogd: [1072212.887368] kernel BUG at net / netfilter /
nf_conntrack_proto_tcp.c: 392

ipv4_get_l4proto() in nf_conntrack_l3proto_ipv4.c and tcp_error() in
nf_conntrack_proto_tcp.c should catch malformed packets, so the errors
at the indicated lines - TCP options parsing - should not happen.
However, tcp_error() relies on the "dataoff" offset to the TCP header,
calculated by ipv4_get_l4proto().  But ipv4_get_l4proto() does not check
bogus ihl values in IPv4 packets, which then can slip through tcp_error()
and get caught at the TCP options parsing routines.

The patch fixes ipv4_get_l4proto() by invalidating packets with bogus
ihl value.

The patch closes netfilter bugzilla id 771.

Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: David Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agonetfilter: nf_conntrack: fix racy timer handling with reliable events
Pablo Neira Ayuso [Wed, 29 Aug 2012 16:25:49 +0000 (16:25 +0000)]
netfilter: nf_conntrack: fix racy timer handling with reliable events

commit 5b423f6a40a0327f9d40bc8b97ce9be266f74368 upstream.

Existing code assumes that del_timer returns true for alive conntrack
entries. However, this is not true if reliable events are enabled.
In that case, del_timer may return true for entries that were
just inserted in the dying list. Note that packets / ctnetlink may
hold references to conntrack entries that were just inserted to such
list.

This patch fixes the issue by adding an independent timer for
event delivery. This increases the size of the ecache extension.
Still we can revisit this later and use variable size extensions
to allocate this area on demand.

Tested-by: Oliver Smith <olipro@8.c.9.b.0.7.4.0.1.0.0.2.ip6.arpa>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: David Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoipvs: fix oops in ip_vs_dst_event on rmmod
Julian Anastasov [Sat, 7 Jul 2012 17:30:11 +0000 (20:30 +0300)]
ipvs: fix oops in ip_vs_dst_event on rmmod

commit 283283c4da91adc44b03519f434ee1e7e91d6fdb upstream.

After commit 39f618b4fd95ae243d940ec64c961009c74e3333 (3.4)
"ipvs: reset ipvs pointer in netns" we can oops in
ip_vs_dst_event on rmmod ip_vs because ip_vs_control_cleanup
is called after the ipvs_core_ops subsys is unregistered and
net->ipvs is NULL. Fix it by exiting early from ip_vs_dst_event
if ipvs is NULL. It is safe because all services and dests
for the net are already freed.

Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: David Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agotg3: Apply short DMA frag workaround to 5906
Matt Carlson [Thu, 7 Jun 2012 12:56:54 +0000 (12:56 +0000)]
tg3: Apply short DMA frag workaround to 5906

commit b7abee6ef888117f92db370620ebf116a38e3f4d upstream.

5906 devices also need the short DMA fragment workaround.  This patch
makes the necessary change.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Tested-by: Christian Kujau <lists@nerdbynature.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Mike Pagano <mpagano@gentoo.org>
5 years agopktgen: fix crash when generating IPv6 packets
Amerigo Wang [Tue, 9 Oct 2012 17:48:16 +0000 (17:48 +0000)]
pktgen: fix crash when generating IPv6 packets

commit 5aa8b572007c4bca1e6d3dd4c4820f1ae49d6bb2 upstream.

For IPv6, sizeof(struct ipv6hdr) = 40, thus the following
expression will result negative:

        datalen = pkt_dev->cur_pkt_size - 14 -
                  sizeof(struct ipv6hdr) - sizeof(struct udphdr) -
                  pkt_dev->pkt_overhead;

And,  the check "if (datalen < sizeof(struct pktgen_hdr))" will be
passed as "datalen" is promoted to unsigned, therefore will cause
a crash later.

This is a quick fix by checking if "datalen" is negative. The following
patch will increase the default value of 'min_pkt_size' for IPv6.

This bug should exist for a long time, so Cc -stable too.

Signed-off-by: Cong Wang <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agotimers: Fix endless looping between cascade() and internal_add_timer()
Hildner, Christian [Mon, 8 Oct 2012 13:49:03 +0000 (15:49 +0200)]
timers: Fix endless looping between cascade() and internal_add_timer()

commit 26cff4e2aa4d666dc6a120ea34336b5057e3e187 upstream.

Adding two (or more) timers with large values for "expires" (they have
to reside within tv5 in the same list) leads to endless looping
between cascade() and internal_add_timer() in case CONFIG_BASE_SMALL
is one and jiffies are crossing the value 1 << 18. The bug was
introduced between 2.6.11 and 2.6.12 (and survived for quite some
time).

This patch ensures that when cascade() is called timers within tv5 are
not added endlessly to their own list again, instead they are added to
the next lower tv level tv4 (as expected).

Signed-off-by: Christian Hildner <christian.hildner@siemens.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Link: http://lkml.kernel.org/r/98673C87CB31274881CFFE0B65ECC87B0F5FC1963E@DEFTHW99EA4MSX.ww902.siemens.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoviafb: don't touch clock state on OLPC XO-1.5
Daniel Drake [Tue, 4 Sep 2012 15:45:32 +0000 (11:45 -0400)]
viafb: don't touch clock state on OLPC XO-1.5

commit 012a1211845eab69a5488d59eb87d24cc518c627 upstream.

As detailed in the thread titled "viafb PLL/clock tweaking causes XO-1.5
instability," enabling or disabling the IGA1/IGA2 clocks causes occasional
stability problems during suspend/resume cycles on this platform.

This is rather odd, as the documentation suggests that clocks have two
states (on/off) and the default (stable) configuration is configured to
enable the clock only when it is needed. However, explicitly enabling *or*
disabling the clock triggers this system instability, suggesting that there
is a 3rd state at play here.

Leaving the clock enable/disable registers alone solves this problem.
This fixes spurious reboots during suspend/resume behaviour introduced by
commit b692a63a.

Signed-off-by: Daniel Drake <dsd@laptop.org>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agovideo/udlfb: fix line counting in fb_write
Alexander Holler [Tue, 14 Aug 2012 07:11:09 +0000 (09:11 +0200)]
video/udlfb: fix line counting in fb_write

commit b8c4321f3d194469007f5f5f2b34ec278c264a04 upstream.

Line 0 and 1 were both written to line 0 (on the display) and all subsequent
lines had an offset of -1. The result was that the last line on the display
was never overwritten by writes to /dev/fbN.

Signed-off-by: Alexander Holler <holler@ahsoftware.de>
Acked-by: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agomodule: taint kernel when lve module is loaded
Matthew Garrett [Fri, 22 Jun 2012 17:49:31 +0000 (13:49 -0400)]
module: taint kernel when lve module is loaded

commit c99af3752bb52ba3aece5315279a57a477edfaf1 upstream.

Cloudlinux have a product called lve that includes a kernel module. This
was previously GPLed but is now under a proprietary license, but the
module continues to declare MODULE_LICENSE("GPL") and makes use of some
EXPORT_SYMBOL_GPL symbols. Forcibly taint it in order to avoid this.

Signed-off-by: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Alex Lyashkov <umka@cloudlinux.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoautofs4 - fix reset pending flag on mount fail
Ian Kent [Thu, 11 Oct 2012 00:00:33 +0000 (08:00 +0800)]
autofs4 - fix reset pending flag on mount fail

commit 49999ab27eab6289a8e4f450e148bdab521361b2 upstream.

In autofs4_d_automount(), if a mount fail occurs the AUTOFS_INF_PENDING
mount pending flag is not cleared.

One effect of this is when using the "browse" option, directory entry
attributes show up with all "?"s due to the incorrect callback and
subsequent failure return (when in fact no callback should be made).

Signed-off-by: Ian Kent <ikent@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoblock: fix request_queue->flags initialization
Tejun Heo [Thu, 20 Sep 2012 21:09:30 +0000 (14:09 -0700)]
block: fix request_queue->flags initialization

commit 60ea8226cbd5c8301f9a39edc574ddabcb8150e0 upstream.

A queue newly allocated with blk_alloc_queue_node() has only
QUEUE_FLAG_BYPASS set.  For request-based drivers,
blk_init_allocated_queue() is called and q->queue_flags is overwritten
with QUEUE_FLAG_DEFAULT which doesn't include BYPASS even though the
initial bypass is still in effect.

In blk_init_allocated_queue(), or QUEUE_FLAG_DEFAULT to q->queue_flags
instead of overwriting.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoxen/bootup: allow read_tscp call for Xen PV guests.
Konrad Rzeszutek Wilk [Wed, 10 Oct 2012 17:30:47 +0000 (13:30 -0400)]
xen/bootup: allow read_tscp call for Xen PV guests.

commit cd0608e71e9757f4dae35bcfb4e88f4d1a03a8ab upstream.

The hypervisor will trap it. However without this patch,
we would crash as the .read_tscp is set to NULL. This patch
fixes it and sets it to the native_read_tscp call.

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoxen/bootup: allow {read|write}_cr8 pvops call.
Konrad Rzeszutek Wilk [Wed, 10 Oct 2012 17:25:48 +0000 (13:25 -0400)]
xen/bootup: allow {read|write}_cr8 pvops call.

commit 1a7bbda5b1ab0e02622761305a32dc38735b90b2 upstream.

We actually do not do anything about it. Just return a default
value of zero and if the kernel tries to write anything but 0
we BUG_ON.

This fixes the case when an user tries to suspend the machine
and it blows up in save_processor_state b/c 'read_cr8' is set
to NULL and we get:

kernel BUG at /home/konrad/ssd/linux/arch/x86/include/asm/paravirt.h:100!
invalid opcode: 0000 [#1] SMP
Pid: 2687, comm: init.late Tainted: G           O 3.6.0upstream-00002-gac264ac-dirty #4 Bochs Bochs
RIP: e030:[<ffffffff814d5f42>]  [<ffffffff814d5f42>] save_processor_state+0x212/0x270

.. snip..
Call Trace:
 [<ffffffff810733bf>] do_suspend_lowlevel+0xf/0xac
 [<ffffffff8107330c>] ? x86_acpi_suspend_lowlevel+0x10c/0x150
 [<ffffffff81342ee2>] acpi_suspend_enter+0x57/0xd5

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoSUNRPC: Ensure that the TCP socket is closed when in CLOSE_WAIT
Trond Myklebust [Wed, 12 Sep 2012 20:49:15 +0000 (16:49 -0400)]
SUNRPC: Ensure that the TCP socket is closed when in CLOSE_WAIT

commit a519fc7a70d1a918574bb826cc6905b87b482eb9 upstream.

Instead of doing a shutdown() call, we need to do an actual close().
Ditto if/when the server is sending us junk RPC headers.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Tested-by: Simon Kirby <sim@hostway.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agofirewire: cdev: fix user memory corruption (i386 userland on amd64 kernel)
Stefan Richter [Sat, 6 Oct 2012 12:12:56 +0000 (14:12 +0200)]
firewire: cdev: fix user memory corruption (i386 userland on amd64 kernel)

commit 790198f74c9d1b46b6a89504361b1a844670d050 upstream.

Fix two bugs of the /dev/fw* character device concerning the
FW_CDEV_IOC_GET_INFO ioctl with nonzero fw_cdev_get_info.bus_reset.
(Practically all /dev/fw* clients issue this ioctl right after opening
the device.)

Both bugs are caused by sizeof(struct fw_cdev_event_bus_reset) being 36
without natural alignment and 40 with natural alignment.

 1) Memory corruption, affecting i386 userland on amd64 kernel:
    Userland reserves a 36 bytes large buffer, kernel writes 40 bytes.
    This has been first found and reported against libraw1394 if
    compiled with gcc 4.7 which happens to order libraw1394's stack such
    that the bug became visible as data corruption.

 2) Information leak, affecting all kernel architectures except i386:
    4 bytes of random kernel stack data were leaked to userspace.

Hence limit the respective copy_to_user() to the 32-bit aligned size of
struct fw_cdev_event_bus_reset.

Reported-by: Simon Kirby <sim@hostway.ca>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoARM: 7541/1: Add ARM ERRATA 775420 workaround
Simon Horman [Fri, 28 Sep 2012 01:12:45 +0000 (02:12 +0100)]
ARM: 7541/1: Add ARM ERRATA 775420 workaround

commit 7253b85cc62d6ff84143d96fe6cd54f73736f4d7 upstream.

arm: Add ARM ERRATA 775420 workaround

Workaround for the 775420 Cortex-A9 (r2p2, r2p6,r2p8,r2p10,r3p0) erratum.
In case a date cache maintenance operation aborts with MMU exception, it
might cause the processor to deadlock. This workaround puts DSB before
executing ISB if an abort may occur on cache maintenance.

Based on work by Kouei Abe and feedback from Catalin Marinas.

Signed-off-by: Kouei Abe <kouei.abe.cp@rms.renesas.com>
[ horms@verge.net.au: Changed to implementation
  suggested by catalin.marinas@arm.com ]
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agotmpfs,ceph,gfs2,isofs,reiserfs,xfs: fix fh_len checking
Hugh Dickins [Mon, 8 Oct 2012 03:32:51 +0000 (20:32 -0700)]
tmpfs,ceph,gfs2,isofs,reiserfs,xfs: fix fh_len checking

commit 35c2a7f4908d404c9124c2efc6ada4640ca4d5d5 upstream.

Fuzzing with trinity oopsed on the 1st instruction of shmem_fh_to_dentry(),
u64 inum = fid->raw[2];
which is unhelpfully reported as at the end of shmem_alloc_inode():

BUG: unable to handle kernel paging request at ffff880061cd3000
IP: [<ffffffff812190d0>] shmem_alloc_inode+0x40/0x40
Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
Call Trace:
 [<ffffffff81488649>] ? exportfs_decode_fh+0x79/0x2d0
 [<ffffffff812d77c3>] do_handle_open+0x163/0x2c0
 [<ffffffff812d792c>] sys_open_by_handle_at+0xc/0x10
 [<ffffffff83a5f3f8>] tracesys+0xe1/0xe6

Right, tmpfs is being stupid to access fid->raw[2] before validating that
fh_len includes it: the buffer kmalloc'ed by do_sys_name_to_handle() may
fall at the end of a page, and the next page not be present.

But some other filesystems (ceph, gfs2, isofs, reiserfs, xfs) are being
careless about fh_len too, in fh_to_dentry() and/or fh_to_parent(), and
could oops in the same way: add the missing fh_len checks to those.

Reported-by: Sasha Levin <levinsasha928@gmail.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Sage Weil <sage@inktank.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agomips,kgdb: fix recursive page fault with CONFIG_KPROBES
Jason Wessel [Fri, 10 Aug 2012 17:21:15 +0000 (12:21 -0500)]
mips,kgdb: fix recursive page fault with CONFIG_KPROBES

commit f0a996eeeda214f4293e234df33b29bec003b536 upstream.

This fault was detected using the kgdb test suite on boot and it
crashes recursively due to the fact that CONFIG_KPROBES on mips adds
an extra die notifier in the page fault handler.  The crash signature
looks like this:

kgdbts:RUN bad memory access test
KGDB: re-enter exception: ALL breakpoints killed
Call Trace:
[<807b7548>] dump_stack+0x20/0x54
[<807b7548>] dump_stack+0x20/0x54

The fix for now is to have kgdb return immediately if the fault type
is DIE_PAGE_FAULT and allow the kprobe code to decide what is supposed
to happen.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoACPI: EC: Add a quirk for CLEVO M720T/M730T laptop
Feng Tang [Fri, 28 Sep 2012 07:22:01 +0000 (15:22 +0800)]
ACPI: EC: Add a quirk for CLEVO M720T/M730T laptop

commit 67bfa9b60bd689601554526d144b21d529f78a09 upstream.

By enlarging the GPE storm threshold back to 20, that laptop's
EC works fine with interrupt mode instead of polling mode.

https://bugzilla.kernel.org/show_bug.cgi?id=45151

Reported-and-Tested-by: Francesco <trentini@dei.unipd.it>
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoACPI: EC: Make the GPE storm threshold a module parameter
Feng Tang [Fri, 28 Sep 2012 07:22:00 +0000 (15:22 +0800)]
ACPI: EC: Make the GPE storm threshold a module parameter

commit a520d52e99b14ba7db135e916348f12f2a6e09be upstream.

The Linux EC driver includes a mechanism to detect GPE storms,
and switch from interrupt-mode to polling mode.  However, polling
mode sometimes doesn't work, so the workaround is problematic.
Also, different systems seem to need the threshold for detecting
the GPE storm at different levels.

ACPI_EC_STORM_THRESHOLD was initially 20 when it's created, and
was changed to 8 in 2.6.28 commit 06cf7d3c7 "ACPI: EC: lower interrupt storm
threshold" to fix kernel bug 11892 by forcing the laptop in that bug to
work in polling mode. However in bug 45151, it works fine in interrupt
mode if we lift the threshold back to 20.

This patch makes the threshold a module parameter so that user has a
flexible option to debug/workaround this issue.

The default is unchanged.

This is also a preparation patch to fix specific systems:
https://bugzilla.kernel.org/show_bug.cgi?id=45151

Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>