opensuse:kernel.git
3 years agoSCSI: qla4xxx: overflow in qla4xxx_set_chap_entry()
Dan Carpenter [Wed, 13 Nov 2013 07:48:11 +0000 (10:48 +0300)]
SCSI: qla4xxx: overflow in qla4xxx_set_chap_entry()

commit 3c60cfd73966797746530768d66597d025a69804 upstream.

We should cap the size of memcpy() because it comes from the network
and can't be trusted.

Fixes: 26ffd7b45fe9 ('[SCSI] qla4xxx: Add support to set CHAP entries')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoSCSI: bfa: Chinook quad port 16G FC HBA claim issue
Vijaya Mohan Guvva [Wed, 4 Dec 2013 13:43:58 +0000 (05:43 -0800)]
SCSI: bfa: Chinook quad port 16G FC HBA claim issue

commit dcaf9aed995c2b2a49fb86bbbcfa2f92c797ab5d upstream.

Bfa driver crash is observed while pushing the firmware on to chinook
quad port card due to uninitialized bfi_image_ct2 access which gets
initialized only for CT2 ASIC based cards after request_firmware().
For quard port chinook (CT2 ASIC based), bfi_image_ct2 is not getting
initialized as there is no check for chinook PCI device ID before
request_firmware and instead bfi_image_cb is initialized as it is the
default case for card type check.

This patch includes changes to read the right firmware for quad port chinook.

Signed-off-by: Vijaya Mohan Guvva <vmohan@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agousb: core: get config and string descriptors for unauthorized devices
Thomas Pugliese [Mon, 9 Dec 2013 19:40:29 +0000 (13:40 -0600)]
usb: core: get config and string descriptors for unauthorized devices

commit 83e83ecb79a8225e79bc8e54e9aff3e0e27658a2 upstream.

There is no need to skip querying the config and string descriptors for
unauthorized WUSB devices when usb_new_device is called.  It is allowed
by WUSB spec.  The only action that needs to be delayed until
authorization time is the set config.  This change allows user mode
tools to see the config and string descriptors earlier in enumeration
which is needed for some WUSB devices to function properly on Android
systems.  It also reduces the amount of divergent code paths needed
for WUSB devices.

Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agohpfs: remember free space
Mikulas Patocka [Tue, 28 Jan 2014 23:10:44 +0000 (00:10 +0100)]
hpfs: remember free space

commit 2cbe5c76fc5e38e9af4b709593146e4b8272b69e upstream.

Previously, hpfs scanned all bitmaps each time the user asked for free
space using statfs.  This patch changes it so that hpfs scans the
bitmaps only once, remembes the free space and on next invocation of
statfs it returns the value instantly.

New versions of wine are hammering on the statfs syscall very heavily,
making some games unplayable when they're stored on hpfs, with load
times in minutes.

This should be backported to the stable kernels because it fixes
user-visible problem (excessive level load times in wine).

Signed-off-by: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoALSA: hda - Don't set indep_hp flag for old AD codecs
Takashi Iwai [Mon, 13 Jan 2014 11:40:07 +0000 (12:40 +0100)]
ALSA: hda - Don't set indep_hp flag for old AD codecs

commit cbd209f41ea5f39394de5c1fe2dd9aa54a9c5744 upstream.

Some old AD codecs don't like the independent HP handling, either it
contains a single DAC (AD1981) or it mandates the mixer routing
(AD1986A).  This patch removes the indep_hp flag for such codecs.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=68081
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoKVM: PPC: e500: Fix bad address type in deliver_tlb_misss()
Mihai Caraman [Thu, 9 Jan 2014 15:01:05 +0000 (17:01 +0200)]
KVM: PPC: e500: Fix bad address type in deliver_tlb_misss()

commit 70713fe315ed14cd1bb07d1a7f33e973d136ae3d upstream.

Use gva_t instead of unsigned int for eaddr in deliver_tlb_miss().

Signed-off-by: Mihai Caraman <mihai.caraman@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoKVM: PPC: Book3S HV: use xics_wake_cpu only when defined
Andreas Schwab [Mon, 30 Dec 2013 14:36:56 +0000 (15:36 +0100)]
KVM: PPC: Book3S HV: use xics_wake_cpu only when defined

commit 48eaef0518a565d3852e301c860e1af6a6db5a84 upstream.

Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoparisc: fix cache-flushing
Helge Deller [Fri, 31 Jan 2014 20:33:17 +0000 (21:33 +0100)]
parisc: fix cache-flushing

commit 57737c49dd72c96cfbcd4f66559f3ffc399aeb4f upstream.

This commit:
f8dae00684d678afa13041ef170cecfd1297ed40: parisc: Ensure full cache coherency for kmap/kunmap
caused negative caching side-effects, e.g. hanging processes with expect and
too many inequivalent alias messages from flush_dcache_page() on Debian 5 systems.

This patch now partly reverts it and has been in production use on our debian buildd
makeservers since a week without any major problems.

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoparisc/sti_console: prefer Linux fonts over built-in ROM fonts
Helge Deller [Fri, 31 Jan 2014 14:39:40 +0000 (15:39 +0100)]
parisc/sti_console: prefer Linux fonts over built-in ROM fonts

commit 8a10bc9d27ceb084b0d8be621a033a475eb9fdfd upstream.

The built-in ROM fonts lack many necessary ASCII characters, which is
why it makes sens to prefer the Linux fonts instead if they are
available.  This makes consoles on STI graphics cards which are not
supported by the stifb driver (e.g. Visualize FXe) looks much nicer.

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoalpha: fix broken network checksum
Mikulas Patocka [Thu, 23 Jan 2014 04:04:33 +0000 (23:04 -0500)]
alpha: fix broken network checksum

commit 0ef38d70d4118b2ce1a538d14357be5ff9dc2bbd upstream.

The patch 3ddc5b46a8e90f3c9251338b60191d0a804b0d92 breaks networking on
alpha (there is a follow-up fix 5cfe8f1ba5eebe6f4b6e5858cdb1a5be4f3272a6,
but networking is still broken even with the second patch).

The patch 3ddc5b46a8e90f3c9251338b60191d0a804b0d92 makes
csum_partial_copy_from_user check the pointer with access_ok. However,
csum_partial_copy_from_user is called also from csum_partial_copy_nocheck
and csum_partial_copy_nocheck is called on kernel pointers and it is
supposed not to check pointer validity.

This bug results in ssh session hangs if the system is loaded and bulk
data are printed to ssh terminal.

This patch fixes csum_partial_copy_nocheck to call set_fs(KERNEL_DS), so
that access_ok in csum_partial_copy_from_user accepts kernel-space
addresses.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agommc: sdhci-esdhc-imx: fix access hardirq-unsafe lock in atomic context
Dong Aisheng [Thu, 26 Dec 2013 07:23:53 +0000 (15:23 +0800)]
mmc: sdhci-esdhc-imx: fix access hardirq-unsafe lock in atomic context

commit a974862faee199cba3ff36b5a148df5fd34bd1e7 upstream.

Sometimes we may meet the following lockdep issue.
The root cause is .set_clock callback is executed with spin_lock_irqsave
in sdhci_do_set_ios. However, the IMX set_clock callback will try to access
clk_get_rate which is using a mutex lock.

The fix avoids access mutex in .set_clock callback by initializing the
pltfm_host->clock at probe time and use it later instead of calling
clk_get_rate again in atomic context.

[ INFO: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected ]
3.13.0-rc1+ #285 Not tainted
------------------------------------------------------
kworker/u8:1/29 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
 (prepare_lock){+.+...}, at: [<80480b08>] clk_prepare_lock+0x44/0xe4

and this task is already holding:
 (&(&host->lock)->rlock#2){-.-...}, at: [<804611f4>] sdhci_do_set_ios+0x20/0x720
which would create a new lock dependency:
 (&(&host->lock)->rlock#2){-.-...} -> (prepare_lock){+.+...}

but this new dependency connects a HARDIRQ-irq-safe lock:
 (&(&host->lock)->rlock#2){-.-...}
... which became HARDIRQ-irq-safe at:
  [<8005f030>] mark_lock+0x140/0x6ac
  [<80060760>] __lock_acquire+0xb30/0x1cbc
  [<800620d0>] lock_acquire+0x70/0x84
  [<8061d2f0>] _raw_spin_lock+0x30/0x40
  [<80460668>] sdhci_irq+0x24/0xa68
  [<8006b1d4>] handle_irq_event_percpu+0x54/0x18c
  [<8006b350>] handle_irq_event+0x44/0x64
  [<8006e50c>] handle_fasteoi_irq+0xa0/0x170
  [<8006a8f0>] generic_handle_irq+0x30/0x44
  [<8000f238>] handle_IRQ+0x54/0xbc
  [<8000864c>] gic_handle_irq+0x30/0x64
  [<80013024>] __irq_svc+0x44/0x5c
  [<80614c58>] printk+0x38/0x40
  [<804622a8>] sdhci_add_host+0x844/0xbcc
  [<80464948>] sdhci_esdhc_imx_probe+0x378/0x67c
  [<8032ee88>] platform_drv_probe+0x20/0x50
  [<8032d48c>] driver_probe_device+0x118/0x234
  [<8032d690>] __driver_attach+0x9c/0xa0
  [<8032b89c>] bus_for_each_dev+0x68/0x9c
  [<8032cf44>] driver_attach+0x20/0x28
  [<8032cbc8>] bus_add_driver+0x148/0x1f4
  [<8032dce0>] driver_register+0x80/0x100
  [<8032ee54>] __platform_driver_register+0x50/0x64
  [<8084b094>] sdhci_esdhc_imx_driver_init+0x18/0x20
  [<80008980>] do_one_initcall+0x108/0x16c
  [<8081cca4>] kernel_init_freeable+0x10c/0x1d0
  [<80611c50>] kernel_init+0x10/0x120
  [<8000e9c8>] ret_from_fork+0x14/0x2c

to a HARDIRQ-irq-unsafe lock:
 (prepare_lock){+.+...}
... which became HARDIRQ-irq-unsafe at:
...  [<8005f030>] mark_lock+0x140/0x6ac
  [<8005f604>] mark_held_locks+0x68/0x12c
  [<8005f780>] trace_hardirqs_on_caller+0xb8/0x1d8
  [<8005f8b4>] trace_hardirqs_on+0x14/0x18
  [<8061a130>] mutex_trylock+0x180/0x20c
  [<80480ad8>] clk_prepare_lock+0x14/0xe4
  [<804816a4>] clk_notifier_register+0x28/0xf0
  [<80015120>] twd_clk_init+0x50/0x68
  [<80008980>] do_one_initcall+0x108/0x16c
  [<8081cca4>] kernel_init_freeable+0x10c/0x1d0
  [<80611c50>] kernel_init+0x10/0x120
  [<8000e9c8>] ret_from_fork+0x14/0x2c

other info that might help us debug this:

 Possible interrupt unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(prepare_lock);
                               local_irq_disable();
                               lock(&(&host->lock)->rlock#2);
                               lock(prepare_lock);
  <Interrupt>
    lock(&(&host->lock)->rlock#2);

 *** DEADLOCK ***

3 locks held by kworker/u8:1/29:
 #0:  (kmmcd){.+.+.+}, at: [<8003db18>] process_one_work+0x128/0x468
 #1:  ((&(&host->detect)->work)){+.+.+.}, at: [<8003db18>] process_one_work+0x128/0x468
 #2:  (&(&host->lock)->rlock#2){-.-...}, at: [<804611f4>] sdhci_do_set_ios+0x20/0x720

the dependencies between HARDIRQ-irq-safe lock and the holding lock:
-> (&(&host->lock)->rlock#2){-.-...} ops: 330 {
   IN-HARDIRQ-W at:
                    [<8005f030>] mark_lock+0x140/0x6ac
                    [<80060760>] __lock_acquire+0xb30/0x1cbc
                    [<800620d0>] lock_acquire+0x70/0x84
                    [<8061d2f0>] _raw_spin_lock+0x30/0x40
                    [<80460668>] sdhci_irq+0x24/0xa68
                    [<8006b1d4>] handle_irq_event_percpu+0x54/0x18c
                    [<8006b350>] handle_irq_event+0x44/0x64
                    [<8006e50c>] handle_fasteoi_irq+0xa0/0x170
                    [<8006a8f0>] generic_handle_irq+0x30/0x44
                    [<8000f238>] handle_IRQ+0x54/0xbc
                    [<8000864c>] gic_handle_irq+0x30/0x64
                    [<80013024>] __irq_svc+0x44/0x5c
                    [<80614c58>] printk+0x38/0x40
                    [<804622a8>] sdhci_add_host+0x844/0xbcc
                    [<80464948>] sdhci_esdhc_imx_probe+0x378/0x67c
                    [<8032ee88>] platform_drv_probe+0x20/0x50
                    [<8032d48c>] driver_probe_device+0x118/0x234
                    [<8032d690>] __driver_attach+0x9c/0xa0
                    [<8032b89c>] bus_for_each_dev+0x68/0x9c
                    [<8032cf44>] driver_attach+0x20/0x28
                    [<8032cbc8>] bus_add_driver+0x148/0x1f4
                    [<8032dce0>] driver_register+0x80/0x100
                    [<8032ee54>] __platform_driver_register+0x50/0x64
                    [<8084b094>] sdhci_esdhc_imx_driver_init+0x18/0x20
                    [<80008980>] do_one_initcall+0x108/0x16c
                    [<8081cca4>] kernel_init_freeable+0x10c/0x1d0
                    [<80611c50>] kernel_init+0x10/0x120
                    [<8000e9c8>] ret_from_fork+0x14/0x2c
   IN-SOFTIRQ-W at:
                    [<8005f030>] mark_lock+0x140/0x6ac
                    [<80060204>] __lock_acquire+0x5d4/0x1cbc
                    [<800620d0>] lock_acquire+0x70/0x84
                    [<8061d40c>] _raw_spin_lock_irqsave+0x40/0x54
                    [<8045e4a4>] sdhci_tasklet_finish+0x1c/0x120
                    [<8002b538>] tasklet_action+0xa0/0x15c
                    [<8002b778>] __do_softirq+0x118/0x290
                    [<8002bcf4>] irq_exit+0xb4/0x10c
                    [<8000f240>] handle_IRQ+0x5c/0xbc
                    [<8000864c>] gic_handle_irq+0x30/0x64
                    [<80013024>] __irq_svc+0x44/0x5c
                    [<80614c58>] printk+0x38/0x40
                    [<804622a8>] sdhci_add_host+0x844/0xbcc
                    [<80464948>] sdhci_esdhc_imx_probe+0x378/0x67c
                    [<8032ee88>] platform_drv_probe+0x20/0x50
                    [<8032d48c>] driver_probe_device+0x118/0x234
                    [<8032d690>] __driver_attach+0x9c/0xa0
                    [<8032b89c>] bus_for_each_dev+0x68/0x9c
                    [<8032cf44>] driver_attach+0x20/0x28
                    [<8032cbc8>] bus_add_driver+0x148/0x1f4
                    [<8032dce0>] driver_register+0x80/0x100
                    [<8032ee54>] __platform_driver_register+0x50/0x64
                    [<8084b094>] sdhci_esdhc_imx_driver_init+0x18/0x20
                    [<80008980>] do_one_initcall+0x108/0x16c
                    [<8081cca4>] kernel_init_freeable+0x10c/0x1d0
                    [<80611c50>] kernel_init+0x10/0x120
                    [<8000e9c8>] ret_from_fork+0x14/0x2c
   INITIAL USE at:
                   [<8005f030>] mark_lock+0x140/0x6ac
                   [<8005ff0c>] __lock_acquire+0x2dc/0x1cbc
                   [<800620d0>] lock_acquire+0x70/0x84
                   [<8061d40c>] _raw_spin_lock_irqsave+0x40/0x54
                   [<804611f4>] sdhci_do_set_ios+0x20/0x720
                   [<80461924>] sdhci_set_ios+0x30/0x3c
                   [<8044cea0>] mmc_power_up+0x6c/0xd0
                   [<8044dac4>] mmc_start_host+0x60/0x70
                   [<8044eb3c>] mmc_add_host+0x60/0x88
                   [<8046225c>] sdhci_add_host+0x7f8/0xbcc
                   [<80464948>] sdhci_esdhc_imx_probe+0x378/0x67c
                   [<8032ee88>] platform_drv_probe+0x20/0x50
                   [<8032d48c>] driver_probe_device+0x118/0x234
                   [<8032d690>] __driver_attach+0x9c/0xa0
                   [<8032b89c>] bus_for_each_dev+0x68/0x9c
                   [<8032cf44>] driver_attach+0x20/0x28
                   [<8032cbc8>] bus_add_driver+0x148/0x1f4
                   [<8032dce0>] driver_register+0x80/0x100
                   [<8032ee54>] __platform_driver_register+0x50/0x64
                   [<8084b094>] sdhci_esdhc_imx_driver_init+0x18/0x20
                   [<80008980>] do_one_initcall+0x108/0x16c
                   [<8081cca4>] kernel_init_freeable+0x10c/0x1d0
                   [<80611c50>] kernel_init+0x10/0x120
                   [<8000e9c8>] ret_from_fork+0x14/0x2c
 }
 ... key      at: [<80e040e8>] __key.26952+0x0/0x8
 ... acquired at:
   [<8005eb60>] check_usage+0x3d0/0x5c0
   [<8005edac>] check_irq_usage+0x5c/0xb8
   [<80060d38>] __lock_acquire+0x1108/0x1cbc
   [<800620d0>] lock_acquire+0x70/0x84
   [<8061a210>] mutex_lock_nested+0x54/0x3c0
   [<80480b08>] clk_prepare_lock+0x44/0xe4
   [<8048188c>] clk_get_rate+0x14/0x64
   [<8046374c>] esdhc_pltfm_set_clock+0x20/0x2a4
   [<8045d70c>] sdhci_set_clock+0x4c/0x498
   [<80461518>] sdhci_do_set_ios+0x344/0x720
   [<80461924>] sdhci_set_ios+0x30/0x3c
   [<8044c390>] __mmc_set_clock+0x44/0x60
   [<8044cd4c>] mmc_set_clock+0x10/0x14
   [<8044f8f4>] mmc_init_card+0x1b4/0x1520
   [<80450f00>] mmc_attach_mmc+0xb4/0x194
   [<8044da08>] mmc_rescan+0x294/0x2f0
   [<8003db94>] process_one_work+0x1a4/0x468
   [<8003e850>] worker_thread+0x118/0x3e0
   [<80044de0>] kthread+0xd4/0xf0
   [<8000e9c8>] ret_from_fork+0x14/0x2c

the dependencies between the lock to be acquired and HARDIRQ-irq-unsafe lock:
-> (prepare_lock){+.+...} ops: 395 {
   HARDIRQ-ON-W at:
                    [<8005f030>] mark_lock+0x140/0x6ac
                    [<8005f604>] mark_held_locks+0x68/0x12c
                    [<8005f780>] trace_hardirqs_on_caller+0xb8/0x1d8
                    [<8005f8b4>] trace_hardirqs_on+0x14/0x18
                    [<8061a130>] mutex_trylock+0x180/0x20c
                    [<80480ad8>] clk_prepare_lock+0x14/0xe4
                    [<804816a4>] clk_notifier_register+0x28/0xf0
                    [<80015120>] twd_clk_init+0x50/0x68
                    [<80008980>] do_one_initcall+0x108/0x16c
                    [<8081cca4>] kernel_init_freeable+0x10c/0x1d0
                    [<80611c50>] kernel_init+0x10/0x120
                    [<8000e9c8>] ret_from_fork+0x14/0x2c
   SOFTIRQ-ON-W at:
                    [<8005f030>] mark_lock+0x140/0x6ac
                    [<8005f604>] mark_held_locks+0x68/0x12c
                    [<8005f7c8>] trace_hardirqs_on_caller+0x100/0x1d8
                    [<8005f8b4>] trace_hardirqs_on+0x14/0x18
                    [<8061a130>] mutex_trylock+0x180/0x20c
                    [<80480ad8>] clk_prepare_lock+0x14/0xe4
                    [<804816a4>] clk_notifier_register+0x28/0xf0
                    [<80015120>] twd_clk_init+0x50/0x68
                    [<80008980>] do_one_initcall+0x108/0x16c
                    [<8081cca4>] kernel_init_freeable+0x10c/0x1d0
                    [<80611c50>] kernel_init+0x10/0x120
                    [<8000e9c8>] ret_from_fork+0x14/0x2c
   INITIAL USE at:
                   [<8005f030>] mark_lock+0x140/0x6ac
                   [<8005ff0c>] __lock_acquire+0x2dc/0x1cbc
                   [<800620d0>] lock_acquire+0x70/0x84
                   [<8061a0c8>] mutex_trylock+0x118/0x20c
                   [<80480ad8>] clk_prepare_lock+0x14/0xe4
                   [<80482af8>] __clk_init+0x1c/0x45c
                   [<8048306c>] _clk_register+0xd0/0x170
                   [<80483148>] clk_register+0x3c/0x7c
                   [<80483b4c>] clk_register_fixed_rate+0x88/0xd8
                   [<80483c04>] of_fixed_clk_setup+0x68/0x94
                   [<8084c6fc>] of_clk_init+0x44/0x68
                   [<808202b0>] time_init+0x2c/0x38
                   [<8081ca14>] start_kernel+0x1e4/0x368
                   [<10008074>] 0x10008074
 }
 ... key      at: [<808afebc>] prepare_lock+0x38/0x48
 ... acquired at:
   [<8005eb94>] check_usage+0x404/0x5c0
   [<8005edac>] check_irq_usage+0x5c/0xb8
   [<80060d38>] __lock_acquire+0x1108/0x1cbc
   [<800620d0>] lock_acquire+0x70/0x84
   [<8061a210>] mutex_lock_nested+0x54/0x3c0
   [<80480b08>] clk_prepare_lock+0x44/0xe4
   [<8048188c>] clk_get_rate+0x14/0x64
   [<8046374c>] esdhc_pltfm_set_clock+0x20/0x2a4
   [<8045d70c>] sdhci_set_clock+0x4c/0x498
   [<80461518>] sdhci_do_set_ios+0x344/0x720
   [<80461924>] sdhci_set_ios+0x30/0x3c
   [<8044c390>] __mmc_set_clock+0x44/0x60
   [<8044cd4c>] mmc_set_clock+0x10/0x14
   [<8044f8f4>] mmc_init_card+0x1b4/0x1520
   [<80450f00>] mmc_attach_mmc+0xb4/0x194
   [<8044da08>] mmc_rescan+0x294/0x2f0
   [<8003db94>] process_one_work+0x1a4/0x468
   [<8003e850>] worker_thread+0x118/0x3e0
   [<80044de0>] kthread+0xd4/0xf0
   [<8000e9c8>] ret_from_fork+0x14/0x2c

stack backtrace:
CPU: 2 PID: 29 Comm: kworker/u8:1 Not tainted 3.13.0-rc1+ #285
Workqueue: kmmcd mmc_rescan
Backtrace:
[<80012160>] (dump_backtrace+0x0/0x10c) from [<80012438>] (show_stack+0x18/0x1c)
 r6:00000000 r5:00000000 r4:8088ecc8 r3:bfa11200
[<80012420>] (show_stack+0x0/0x1c) from [<80616b14>] (dump_stack+0x84/0x9c)
[<80616a90>] (dump_stack+0x0/0x9c) from [<8005ebb4>] (check_usage+0x424/0x5c0)
 r5:80979940 r4:bfa29b44
[<8005e790>] (check_usage+0x0/0x5c0) from [<8005edac>] (check_irq_usage+0x5c/0xb8)
[<8005ed50>] (check_irq_usage+0x0/0xb8) from [<80060d38>] (__lock_acquire+0x1108/0x1cbc)
 r8:bfa115e8 r7:80df9884 r6:80dafa9c r5:00000003 r4:bfa115d0
[<8005fc30>] (__lock_acquire+0x0/0x1cbc) from [<800620d0>] (lock_acquire+0x70/0x84)
[<80062060>] (lock_acquire+0x0/0x84) from [<8061a210>] (mutex_lock_nested+0x54/0x3c0)
 r7:bfa11200 r6:80dafa9c r5:00000000 r4:80480b08
[<8061a1bc>] (mutex_lock_nested+0x0/0x3c0) from [<80480b08>] (clk_prepare_lock+0x44/0xe4)
[<80480ac4>] (clk_prepare_lock+0x0/0xe4) from [<8048188c>] (clk_get_rate+0x14/0x64)
 r6:03197500 r5:bf0e9aa8 r4:bf827400 r3:808ae128
[<80481878>] (clk_get_rate+0x0/0x64) from [<8046374c>] (esdhc_pltfm_set_clock+0x20/0x2a4)
 r5:bf0e9aa8 r4:bf0e9c40
[<8046372c>] (esdhc_pltfm_set_clock+0x0/0x2a4) from [<8045d70c>] (sdhci_set_clock+0x4c/0x498)
[<8045d6c0>] (sdhci_set_clock+0x0/0x498) from [<80461518>] (sdhci_do_set_ios+0x344/0x720)
 r8:0000003b r7:20000113 r6:bf0e9d68 r5:bf0e9aa8 r4:bf0e9c40
r3:00000000
[<804611d4>] (sdhci_do_set_ios+0x0/0x720) from [<80461924>] (sdhci_set_ios+0x30/0x3c)
 r9:00000004 r8:bf131000 r7:bf131048 r6:00000000 r5:bf0e9aa8
r4:bf0e9800
[<804618f4>] (sdhci_set_ios+0x0/0x3c) from [<8044c390>] (__mmc_set_clock+0x44/0x60)
 r5:03197500 r4:bf0e9800
[<8044c34c>] (__mmc_set_clock+0x0/0x60) from [<8044cd4c>] (mmc_set_clock+0x10/0x14)
 r5:00000000 r4:bf0e9800
[<8044cd3c>] (mmc_set_clock+0x0/0x14) from [<8044f8f4>] (mmc_init_card+0x1b4/0x1520)
[<8044f740>] (mmc_init_card+0x0/0x1520) from [<80450f00>] (mmc_attach_mmc+0xb4/0x194)
[<80450e4c>] (mmc_attach_mmc+0x0/0x194) from [<8044da08>] (mmc_rescan+0x294/0x2f0)
 r5:8065f358 r4:bf0e9af8
[<8044d774>] (mmc_rescan+0x0/0x2f0) from [<8003db94>] (process_one_work+0x1a4/0x468)
 r8:00000000 r7:bfa29eb0 r6:bf80dc00 r5:bf0e9af8 r4:bf9e3f00
r3:8044d774
[<8003d9f0>] (process_one_work+0x0/0x468) from [<8003e850>] (worker_thread+0x118/0x3e0)
[<8003e738>] (worker_thread+0x0/0x3e0) from [<80044de0>] (kthread+0xd4/0xf0)
[<80044d0c>] (kthread+0x0/0xf0) from [<8000e9c8>] (ret_from_fork+0x14/0x2c)
 r7:00000000 r6:00000000 r5:80044d0c r4:bf9e7f00

Fixes: 0ddf03c mmc: esdhc-imx: parse max-frequency from devicetree
Signed-off-by: Dong Aisheng <b29396@freescale.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Tested-by: Philippe De Muyter <phdm@macqel.be>
Signed-off-by: Chris Ball <chris@printf.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agommc: sdhci: fix lockdep error in tuning routine
Aisheng Dong [Mon, 23 Dec 2013 11:13:04 +0000 (19:13 +0800)]
mmc: sdhci: fix lockdep error in tuning routine

commit 2b35bd83467df6f8284b9148d6f768148c3a5e5f upstream.

The sdhci_execute_tuning routine gets lock separately by
disable_irq(host->irq);
spin_lock(&host->lock);
It will cause the following lockdep error message since the &host->lock
could also be got in irq context.
Use spin_lock_irqsave/spin_unlock_restore instead to get rid of
this error message.

[ INFO: inconsistent lock state ]
3.13.0-rc1+ #287 Not tainted
---------------------------------
inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
kworker/u2:1/33 [HC0[0]:SC0[0]:HE1:SE1] takes:
 (&(&host->lock)->rlock){?.-...}, at: [<8045f7f4>] sdhci_execute_tuning+0x4c/0x710
{IN-HARDIRQ-W} state was registered at:
  [<8005f030>] mark_lock+0x140/0x6ac
  [<80060760>] __lock_acquire+0xb30/0x1cbc
  [<800620d0>] lock_acquire+0x70/0x84
  [<8061d1c8>] _raw_spin_lock+0x30/0x40
  [<804605cc>] sdhci_irq+0x24/0xa68
  [<8006b1d4>] handle_irq_event_percpu+0x54/0x18c
  [<8006b350>] handle_irq_event+0x44/0x64
  [<8006e50c>] handle_fasteoi_irq+0xa0/0x170
  [<8006a8f0>] generic_handle_irq+0x30/0x44
  [<8000f238>] handle_IRQ+0x54/0xbc
  [<8000864c>] gic_handle_irq+0x30/0x64
  [<80013024>] __irq_svc+0x44/0x5c
  [<80329bf4>] dev_vprintk_emit+0x50/0x58
  [<80329c24>] dev_printk_emit+0x28/0x30
  [<80329fec>] __dev_printk+0x4c/0x90
  [<8032a180>] dev_err+0x3c/0x48
  [<802dd4f0>] _regulator_get+0x158/0x1cc
  [<802dd5b4>] regulator_get_optional+0x18/0x1c
  [<80461df4>] sdhci_add_host+0x42c/0xbd8
  [<80464820>] sdhci_esdhc_imx_probe+0x378/0x67c
  [<8032ee88>] platform_drv_probe+0x20/0x50
  [<8032d48c>] driver_probe_device+0x118/0x234
  [<8032d690>] __driver_attach+0x9c/0xa0
  [<8032b89c>] bus_for_each_dev+0x68/0x9c
  [<8032cf44>] driver_attach+0x20/0x28
  [<8032cbc8>] bus_add_driver+0x148/0x1f4
  [<8032dce0>] driver_register+0x80/0x100
  [<8032ee54>] __platform_driver_register+0x50/0x64
  [<8084b094>] sdhci_esdhc_imx_driver_init+0x18/0x20
  [<80008980>] do_one_initcall+0x108/0x16c
  [<8081cca4>] kernel_init_freeable+0x10c/0x1d0
  [<80611b28>] kernel_init+0x10/0x120
  [<8000e9c8>] ret_from_fork+0x14/0x2c
irq event stamp: 805
hardirqs last  enabled at (805): [<8061d43c>] _raw_spin_unlock_irqrestore+0x38/0x4c
hardirqs last disabled at (804): [<8061d2c8>] _raw_spin_lock_irqsave+0x24/0x54
softirqs last  enabled at (570): [<8002b824>] __do_softirq+0x1c4/0x290
softirqs last disabled at (561): [<8002bcf4>] irq_exit+0xb4/0x10c

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(&(&host->lock)->rlock);
  <Interrupt>
    lock(&(&host->lock)->rlock);

 *** DEADLOCK ***

2 locks held by kworker/u2:1/33:
 #0:  (kmmcd){.+.+..}, at: [<8003db18>] process_one_work+0x128/0x468
 #1:  ((&(&host->detect)->work)){+.+...}, at: [<8003db18>] process_one_work+0x128/0x468

stack backtrace:
CPU: 0 PID: 33 Comm: kworker/u2:1 Not tainted 3.13.0-rc1+ #287
Workqueue: kmmcd mmc_rescan
Backtrace:
[<80012160>] (dump_backtrace+0x0/0x10c) from [<80012438>] (show_stack+0x18/0x1c)
 r6:bfad0900 r5:00000000 r4:8088ecc8 r3:bfad0900
[<80012420>] (show_stack+0x0/0x1c) from [<806169ec>] (dump_stack+0x84/0x9c)
[<80616968>] (dump_stack+0x0/0x9c) from [<806147b4>] (print_usage_bug+0x260/0x2d0)
 r5:8076ba88 r4:80977410
[<80614554>] (print_usage_bug+0x0/0x2d0) from [<8005f0d0>] (mark_lock+0x1e0/0x6ac)
 r9:8005e678 r8:00000000 r7:bfad0900 r6:00001015 r5:bfad0cd0
r4:00000002
[<8005eef0>] (mark_lock+0x0/0x6ac) from [<80060234>] (__lock_acquire+0x604/0x1cbc)
[<8005fc30>] (__lock_acquire+0x0/0x1cbc) from [<800620d0>] (lock_acquire+0x70/0x84)
[<80062060>] (lock_acquire+0x0/0x84) from [<8061d1c8>] (_raw_spin_lock+0x30/0x40)
 r7:00000000 r6:bfb63000 r5:00000000 r4:bfb60568
[<8061d198>] (_raw_spin_lock+0x0/0x40) from [<8045f7f4>] (sdhci_execute_tuning+0x4c/0x710)
 r4:bfb60000
[<8045f7a8>] (sdhci_execute_tuning+0x0/0x710) from [<80453454>] (mmc_sd_init_card+0x5f8/0x660)
[<80452e5c>] (mmc_sd_init_card+0x0/0x660) from [<80453748>] (mmc_attach_sd+0xb4/0x180)
 r9:bf92d400 r8:8065f364 r7:00061a80 r6:bfb60000 r5:8065f358
r4:bfb60000
[<80453694>] (mmc_attach_sd+0x0/0x180) from [<8044d9f8>] (mmc_rescan+0x284/0x2f0)
 r5:8065f358 r4:bfb602f8
[<8044d774>] (mmc_rescan+0x0/0x2f0) from [<8003db94>] (process_one_work+0x1a4/0x468)
 r8:00000000 r7:bfb55eb0 r6:bf80dc00 r5:bfb602f8 r4:bfb35980
r3:8044d774
[<8003d9f0>] (process_one_work+0x0/0x468) from [<8003e850>] (worker_thread+0x118/0x3e0)
[<8003e738>] (worker_thread+0x0/0x3e0) from [<80044de0>] (kthread+0xd4/0xf0)
[<80044d0c>] (kthread+0x0/0xf0) from [<8000e9c8>] (ret_from_fork+0x14/0x2c)
 r7:00000000 r6:00000000 r5:80044d0c r4:bfb37b40

Signed-off-by: Dong Aisheng <b29396@freescale.com>
Signed-off-by: Chris Ball <chris@printf.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agommc: sdhci-pci: add broken HS200 quirk for Intel Merrifield
David Cohen [Tue, 29 Oct 2013 17:58:27 +0000 (10:58 -0700)]
mmc: sdhci-pci: add broken HS200 quirk for Intel Merrifield

commit 390145f9adcf2730fcee81c8a51fd7c6c08f705f upstream.

Due to unknown hw issue so far, Merrifield is unable to enable HS200
support. This patch adds quirk to avoid SDHCI to initialize with error
below:

[   53.850132] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W
3.12.0-rc6-00037-g3d7c8d9-dirty #36
[   53.850150] Hardware name: Intel Corporation Merrifield/SALT BAY,
BIOS 397 2013.09.12:11.51.40
[   53.850167]  00000000 00000000 ee409e48 c18816d2 00000000 ee409e78
c123e254 c1acc9b0
[   53.850227]  00000000 00000000 c1b14148 000003de c16c03bf c16c03bf
ee75b480 ed97c54c
[   53.850282]  ee75b480 ee409e88 c123e292 00000009 00000000 ee409ef8
c16c03bf c1207fac
[   53.850339] Call Trace:
[   53.850376]  [<c18816d2>] dump_stack+0x4b/0x79
[   53.850408]  [<c123e254>] warn_slowpath_common+0x84/0xa0
[   53.850436]  [<c16c03bf>] ? sdhci_send_command+0xb4f/0xc50
[   53.850462]  [<c16c03bf>] ? sdhci_send_command+0xb4f/0xc50
[   53.850490]  [<c123e292>] warn_slowpath_null+0x22/0x30
[   53.850516]  [<c16c03bf>] sdhci_send_command+0xb4f/0xc50
[   53.850545]  [<c1207fac>] ? native_sched_clock+0x2c/0xb0
[   53.850575]  [<c14c1f93>] ? delay_tsc+0x73/0xb0
[   53.850601]  [<c14c1ebe>] ? __const_udelay+0x1e/0x20
[   53.850626]  [<c16bdeb3>] ? sdhci_reset+0x93/0x190
[   53.850654]  [<c16c05b0>] sdhci_finish_data+0xf0/0x2e0
[   53.850683]  [<c16c130f>] sdhci_irq+0x31f/0x930
[   53.850713]  [<c12cb080>] ? __buffer_unlock_commit+0x10/0x20
[   53.850740]  [<c12cbcd7>] ? trace_buffer_unlock_commit+0x37/0x50
[   53.850773]  [<c1288f3c>] handle_irq_event_percpu+0x5c/0x220
[   53.850800]  [<c128bc96>] ? handle_fasteoi_irq+0x16/0xd0
[   53.850827]  [<c128913a>] handle_irq_event+0x3a/0x60
[   53.850852]  [<c128bc80>] ? unmask_irq+0x30/0x30
[   53.850878]  [<c128bcce>] handle_fasteoi_irq+0x4e/0xd0
[   53.850895]  <IRQ>  [<c1890b52>] ? do_IRQ+0x42/0xb0
[   53.850943]  [<c1890a31>] ? common_interrupt+0x31/0x38
[   53.850973]  [<c12b00d8>] ? cgroup_mkdir+0x4e8/0x580
[   53.851001]  [<c1208d32>] ? default_idle+0x22/0xf0
[   53.851029]  [<c1209576>] ? arch_cpu_idle+0x26/0x30
[   53.851054]  [<c1288505>] ? cpu_startup_entry+0x65/0x240
[   53.851082]  [<c18793d5>] ? rest_init+0xb5/0xc0
[   53.851108]  [<c1879320>] ? __read_lock_failed+0x18/0x18
[   53.851138]  [<c1bf6a15>] ? start_kernel+0x31b/0x321
[   53.851164]  [<c1bf652f>] ? repair_env_string+0x51/0x51
[   53.851190]  [<c1bf6363>] ? i386_start_kernel+0x139/0x13c
[   53.851209] ---[ end trace 92777f5fe48d33f2 ]---
[   53.853449] mmcblk0: error -84 transferring data, sector 11142162, nr
304, cmd response 0x0, card status 0x0
[   53.853476] mmcblk0: retrying using single block read
[   55.937863] sdhci: Timeout waiting for Buffer Read Ready interrupt
during tuning procedure, falling back to fixed sampling clock
[   56.207951] sdhci: Timeout waiting for Buffer Read Ready interrupt
during tuning procedure, falling back to fixed sampling clock
[   66.228785] mmc0: Timeout waiting for hardware interrupt.
[   66.230855] ------------[ cut here ]------------

Signed-off-by: David Cohen <david.a.cohen@linux.intel.com>
Reviewed-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Acked-by: Dong Aisheng <b29396@freescale.com>
Signed-off-by: Chris Ball <chris@printf.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agommc: sdhci: add quirk for broken HS200 support
David Cohen [Tue, 29 Oct 2013 17:58:26 +0000 (10:58 -0700)]
mmc: sdhci: add quirk for broken HS200 support

commit 13868bf20f2f2c305f96e23620b024e167d6f9cb upstream.

This patch defines a quirk for platforms unable to enable HS200 support.

Signed-off-by: David Cohen <david.a.cohen@linux.intel.com>
Reviewed-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Acked-by: Dong Aisheng <b29396@freescale.com>
Signed-off-by: Chris Ball <chris@printf.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agonet: gre: use icmp_hdr() to get inner ip header
Duan Jiong [Tue, 28 Jan 2014 03:49:43 +0000 (11:49 +0800)]
net: gre: use icmp_hdr() to get inner ip header

[ Upstream commit c0c0c50ff7c3e331c90bab316d21f724fb9e1994 ]

When dealing with icmp messages, the skb->data points the
ip header that triggered the sending of the icmp message.

In gre_cisco_err(), the parse_gre_header() is called, and the
iptunnel_pull_header() is called to pull the skb at the end of
the parse_gre_header(), so the skb->data doesn't point the
inner ip header.

Unfortunately, the ipgre_err still needs those ip addresses in
inner ip header to look up tunnel by ip_tunnel_lookup().

So just use icmp_hdr() to get inner ip header instead of skb->data.

Signed-off-by: Duan Jiong <duanj.fnst@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoxen-netfront: fix resource leak in netfront
Annie Li [Tue, 28 Jan 2014 03:35:42 +0000 (11:35 +0800)]
xen-netfront: fix resource leak in netfront

[ Upstream commit cefe0078eea52af17411eb1248946a94afb84ca5 ]

This patch removes grant transfer releasing code from netfront, and uses
gnttab_end_foreign_access to end grant access since
gnttab_end_foreign_access_ref may fail when the grant entry is
currently used for reading or writing.

* clean up grant transfer code kept from old netfront(2.6.18) which grants
pages for access/map and transfer. But grant transfer is deprecated in current
netfront, so remove corresponding release code for transfer.

* fix resource leak, release grant access (through gnttab_end_foreign_access)
and skb for tx/rx path, use get_page to ensure page is released when grant
access is completed successfully.

Xen-blkfront/xen-tpmfront/xen-pcifront also have similar issue, but patches
for them will be created separately.

V6: Correct subject line and commit message.

V5: Remove unecessary change in xennet_end_access.

V4: Revert put_page in gnttab_end_foreign_access, and keep netfront change in
single patch.

V3: Changes as suggestion from David Vrabel, ensure pages are not freed untill
grant acess is ended.

V2: Improve patch comments.

Signed-off-by: Annie Li <annie.li@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agonet: Fix memory leak if TPROXY used with TCP early demux
Holger Eitzenberger [Mon, 27 Jan 2014 09:33:18 +0000 (10:33 +0100)]
net: Fix memory leak if TPROXY used with TCP early demux

[ Upstream commit a452ce345d63ddf92cd101e4196569f8718ad319 ]

I see a memory leak when using a transparent HTTP proxy using TPROXY
together with TCP early demux and Kernel v3.8.13.15 (Ubuntu stable):

unreferenced object 0xffff88008cba4a40 (size 1696):
  comm "softirq", pid 0, jiffies 4294944115 (age 8907.520s)
  hex dump (first 32 bytes):
    0a e0 20 6a 40 04 1b 37 92 be 32 e2 e8 b4 00 00  .. j@..7..2.....
    02 00 07 01 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff810b710a>] kmem_cache_alloc+0xad/0xb9
    [<ffffffff81270185>] sk_prot_alloc+0x29/0xc5
    [<ffffffff812702cf>] sk_clone_lock+0x14/0x283
    [<ffffffff812aaf3a>] inet_csk_clone_lock+0xf/0x7b
    [<ffffffff8129a893>] netlink_broadcast+0x14/0x16
    [<ffffffff812c1573>] tcp_create_openreq_child+0x1b/0x4c3
    [<ffffffff812c033e>] tcp_v4_syn_recv_sock+0x38/0x25d
    [<ffffffff812c13e4>] tcp_check_req+0x25c/0x3d0
    [<ffffffff812bf87a>] tcp_v4_do_rcv+0x287/0x40e
    [<ffffffff812a08a7>] ip_route_input_noref+0x843/0xa55
    [<ffffffff812bfeca>] tcp_v4_rcv+0x4c9/0x725
    [<ffffffff812a26f4>] ip_local_deliver_finish+0xe9/0x154
    [<ffffffff8127a927>] __netif_receive_skb+0x4b2/0x514
    [<ffffffff8127aa77>] process_backlog+0xee/0x1c5
    [<ffffffff8127c949>] net_rx_action+0xa7/0x200
    [<ffffffff81209d86>] add_interrupt_randomness+0x39/0x157

But there are many more, resulting in the machine going OOM after some
days.

From looking at the TPROXY code, and with help from Florian, I see
that the memory leak is introduced in tcp_v4_early_demux():

  void tcp_v4_early_demux(struct sk_buff *skb)
  {
    /* ... */

    iph = ip_hdr(skb);
    th = tcp_hdr(skb);

    if (th->doff < sizeof(struct tcphdr) / 4)
        return;

    sk = __inet_lookup_established(dev_net(skb->dev), &tcp_hashinfo,
                       iph->saddr, th->source,
                       iph->daddr, ntohs(th->dest),
                       skb->skb_iif);
    if (sk) {
        skb->sk = sk;

where the socket is assigned unconditionally to skb->sk, also bumping
the refcnt on it.  This is problematic, because in our case the skb
has already a socket assigned in the TPROXY target.  This then results
in the leak I see.

The very same issue seems to be with IPv6, but haven't tested.

Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Holger Eitzenberger <holger@eitzenberger.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agofib_frontend: fix possible NULL pointer dereference
Oliver Hartkopp [Thu, 23 Jan 2014 09:19:34 +0000 (10:19 +0100)]
fib_frontend: fix possible NULL pointer dereference

[ Upstream commit a0065f266a9b5d51575535a25c15ccbeed9a9966 ]

The two commits 0115e8e30d (net: remove delay at device dismantle) and
748e2d9396a (net: reinstate rtnl in call_netdevice_notifiers()) silently
removed a NULL pointer check for in_dev since Linux 3.7.

This patch re-introduces this check as it causes crashing the kernel when
setting small mtu values on non-ip capable netdevices.

Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agonet/vxlan: Share RX skb de-marking and checksum checks with ovs
Or Gerlitz [Thu, 23 Jan 2014 09:28:13 +0000 (11:28 +0200)]
net/vxlan: Share RX skb de-marking and checksum checks with ovs

[ Upstream commit d0bc65557ad09a57b4db176e9e3ccddb26971453 ]

Make sure the practice set by commit 0afb166 "vxlan: Add capability
of Rx checksum offload for inner packet" is applied when the skb
goes through the portion of the RX code which is shared between
vxlan netdevices and ovs vxlan port instances.

Cc: Joseph Gasparakis <joseph.gasparakis@intel.com>
Cc: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoip_tunnel: clear IPCB in ip_tunnel_xmit() in case dst_link_failure() is called
Duan Jiong [Thu, 23 Jan 2014 06:00:25 +0000 (14:00 +0800)]
ip_tunnel: clear IPCB in ip_tunnel_xmit() in case dst_link_failure() is called

[ Upstream commit 11c21a307d79ea5f6b6fc0d3dfdeda271e5e65f6 ]

commit a622260254ee48("ip_tunnel: fix kernel panic with icmp_dest_unreach")
clear IPCB in ip_tunnel_xmit()  , or else skb->cb[] may contain garbage from
GSO segmentation layer.

But commit 0e6fbc5b6c621("ip_tunnels: extend iptunnel_xmit()") refactor codes,
and it clear IPCB behind the dst_link_failure().

So clear IPCB in ip_tunnel_xmit() just like commti a622260254ee48("ip_tunnel:
fix kernel panic with icmp_dest_unreach").

Signed-off-by: Duan Jiong <duanj.fnst@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agodrivers/tty: ehv_bytechan fails to build as a module
Anton Blanchard [Mon, 9 Dec 2013 05:03:10 +0000 (16:03 +1100)]
drivers/tty: ehv_bytechan fails to build as a module

commit a183d3ae63c08186477d2b0ef2798d47d10add4b upstream.

ehv_bytechan is marked tristate but fails to build as a module:

drivers/tty/ehv_bytechan.c:363:1: error: type defaults to ‘int’ in declaration of ‘console_initcall’ [-Werror=implicit-int]

It doesn't make much sense for a console driver to be built as
a module, so change it to a bool.

Signed-off-by: Anton Blanchard <anton@samba.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoi2c: piix4: Add support for AMD ML and CZ SMBus changes
Shane Huang [Wed, 22 Jan 2014 22:05:46 +0000 (14:05 -0800)]
i2c: piix4: Add support for AMD ML and CZ SMBus changes

commit 032f708bc4f6da868ec49dac48ddf3670d8035d3 upstream.

The locations of SMBus register base address and enablement bit are changed
from AMD ML, which need this patch to be supported.

Signed-off-by: Shane Huang <shane.huang@amd.com>
Reviewed-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoi2c: mv64xxx: Document the newly introduced Armada XP A0 compatible
Gregory CLEMENT [Tue, 31 Dec 2013 16:07:35 +0000 (17:07 +0100)]
i2c: mv64xxx: Document the newly introduced Armada XP A0 compatible

commit f8b94beb7e6a374cb0de531b72377c49857b35ca upstream.

The first variants of Armada XP SoCs (A0 stepping) have issues related
to the i2c controller which prevent to use the offload mechanism and
lead to a kernel hang during boot.

The commit introduces a new the compatible string
marvell,mv78230-a0-i2c for the i2c controller.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
cc: devicetree@vger.kernel.org
Fixes: 930ab3d403ae (i2c: mv64xxx: Add I2C Transaction Generator support)
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoi2c: mv64xxx: Fix bus hang on A0 version of the Armada XP SoCs
Gregory CLEMENT [Tue, 31 Dec 2013 15:59:33 +0000 (16:59 +0100)]
i2c: mv64xxx: Fix bus hang on A0 version of the Armada XP SoCs

commit 6cf70ae928bae17077efc0d528dec49bc380438b upstream.

The first variants of Armada XP SoCs (A0 stepping) have issues related
to the i2c controller which prevent to use the offload mechanism and
lead to a kernel hang during boot.

The commit introduces a new the compatible string
marvell,mv78230-a0-i2c for the i2c controller. When this compatible
string is used the driver disables the offload mechanism and the
kernel no more hangs on these SoCs.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Reported-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 930ab3d403ae (i2c: mv64xxx: Add I2C Transaction Generator support)
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoARM: mvebu: Add quirk for i2c for the OpenBlocks AX3-4 board
Gregory CLEMENT [Tue, 7 Jan 2014 15:26:01 +0000 (16:26 +0100)]
ARM: mvebu: Add quirk for i2c for the OpenBlocks AX3-4 board

commit 85e618a1be2b2092318178d1d66bdad49cbbeeeb upstream.

The first variants of Armada XP SoCs (A0 stepping) have issues related
to the i2c controller which prevent to use the offload mechanism and
lead to a kernel hang during boot.

This commit add quirk in the mvebu platform code to check the SoC
version and then update the compatible string for the i2c controller
according to the revision of the SoC. Currently only some OpenBlocks
AX3-4 boards are known to use an A0 revision so the check is done only
for these boards.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Fixes: 930ab3d403ae (i2c: mv64xxx: Add I2C Transaction Generator support)
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoARM: mvebu: Add support to get the ID and the revision of a SoC
Gregory CLEMENT [Thu, 2 Jan 2014 14:08:59 +0000 (15:08 +0100)]
ARM: mvebu: Add support to get the ID and the revision of a SoC

commit af8d1c63afcbf36eea06789c92e22d4af118d2fb upstream.

All the mvebu SoCs have information related to their variant and
revision that can be read from the PCI control register.

This patch adds support for Armada XP and Armada 370. This reading of
the revision and the ID are done before the PCI initialization to
avoid any conflicts. Once these data are retrieved, the resources are
freed to let the PCI subsystem use it.

Fixes: 930ab3d403ae (i2c: mv64xxx: Add I2C Transaction Generator support)
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agohp_accel: Add a new PnP ID HPQ6007 for new HP laptops
Takashi Iwai [Mon, 13 Jan 2014 11:32:44 +0000 (12:32 +0100)]
hp_accel: Add a new PnP ID HPQ6007 for new HP laptops

commit b0ad4ff35d479a46a3b995a299db9aeb097acfce upstream.

The DriveGuard chips on the new HP laptops are with a new PnP ID
"HPQ6007".  It should be compatible with older chips.

Acked-by: Éric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agozram: fix race between reset and flushing pending work
Minchan Kim [Thu, 30 Jan 2014 23:45:58 +0000 (15:45 -0800)]
zram: fix race between reset and flushing pending work

commit da4a04126baa3be03bc566d4a2ee0944c5e783d0 upstream.

Dan and Sergey reported that there is a racy between reset and flushing
of pending work so that it could make oops by freeing zram->meta in
reset while zram_slot_free can access zram->meta if new request is
adding during the race window.

This patch moves flush after taking init_lock so it prevents new request
so that it closes the race.

Signed-off-by: Minchan Kim <minchan@kernel.org>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Tested-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agobcache: Data corruption fix
Kent Overstreet [Wed, 18 Dec 2013 01:51:02 +0000 (17:51 -0800)]
bcache: Data corruption fix

commit ef71ec00002d92a08eb27e9d036e3d48835b6597 upstream.

The code that handles overlapping extents that we've just read back in from disk
was depending on the behaviour of the code that handles overlapping extents as
we're inserting into a btree node in the case of an insert that forced an
existing extent to be split: on insert, if we had to split we'd also insert a
new extent to represent the top part of the old extent - and then that new
extent would get written out.

The code that read the extents back in thus not bother with splitting extents -
if it saw an extent that ovelapped in the middle of an older extent, it would
trim the old extent to only represent the bottom part, assuming that the
original insert would've inserted a new extent to represent the top part.

I still haven't figured out _how_ it can happen, but I'm now pretty convinced
(and testing has confirmed) that there's some kind of an obscure corner case
(probably involving extent merging, and multiple overwrites in different sets)
that breaks this. The fix is to change the mergesort fixup code to split extents
itself when required.

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agovfs: Is mounted should be testing mnt_ns for NULL or error.
Eric W. Biederman [Mon, 20 Jan 2014 23:26:15 +0000 (15:26 -0800)]
vfs: Is mounted should be testing mnt_ns for NULL or error.

commit 260a459d2e39761fbd39803497205ce1690bc7b1 upstream.

A bug was introduced with the is_mounted helper function in
commit f7a99c5b7c8bd3d3f533c8b38274e33f3da9096e
Author: Al Viro <viro@zeniv.linux.org.uk>
Date:   Sat Jun 9 00:59:08 2012 -0400

    get rid of ->mnt_longterm

    it's enough to set ->mnt_ns of internal vfsmounts to something
    distinct from all struct mnt_namespace out there; then we can
    just use the check for ->mnt_ns != NULL in the fast path of
    mntput_no_expire()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The intent was to test if the real_mount(vfsmount)->mnt_ns was
NULL_OR_ERR but the code is actually testing real_mount(vfsmount)
and always returning true.

The result is d_absolute_path returning paths it should be hiding.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agovfs: Remove second variable named error in __dentry_path
Eric W. Biederman [Mon, 20 Jan 2014 23:43:25 +0000 (15:43 -0800)]
vfs: Remove second variable named error in __dentry_path

commit a8323da0366d3398eda62741d2ac1130c8a172ed upstream.

In commit  232d2d60aa5469bb097f55728f65146bd49c1d25
Author: Waiman Long <Waiman.Long@hp.com>
Date:   Mon Sep 9 12:18:13 2013 -0400

    dcache: Translating dentry into pathname without taking rename_lock

The __dentry_path locking was changed and the variable error was
intended to be moved outside of the loop.  Unfortunately the inner
declaration of error was not removed. Resulting in a version of
__dentry_path that will never return an error.

Remove the problematic inner declaration of error and allow
__dentry_path to return errors once again.

Cc: Waiman Long <Waiman.Long@hp.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoext4: avoid clearing beyond i_blocks when truncating an inline data file
Theodore Ts'o [Tue, 7 Jan 2014 17:58:19 +0000 (12:58 -0500)]
ext4: avoid clearing beyond i_blocks when truncating an inline data file

commit 09c455aaa8f47a94d5bafaa23d58365768210507 upstream.

A missing cast means that when we are truncating a file which is less
than 60 bytes, we don't clear the correct area of memory, and in fact
we can end up truncating the next inode in the inode table, or worse
yet, some other kernel data structure.

Addresses-Coverity-Id: #751987

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agolibata: disable LPM for some WD SATA-I devices
Tejun Heo [Thu, 16 Jan 2014 14:47:17 +0000 (09:47 -0500)]
libata: disable LPM for some WD SATA-I devices

commit ecd75ad514d73efc1bbcc5f10a13566c3ace5f53 upstream.

For some reason, some early WD drives spin up and down drives
erratically when the link is put into slumber mode which can reduce
the life expectancy of the device significantly.  Unfortunately, we
don't have full list of devices and given the nature of the issue it'd
be better to err on the side of false positives than the other way
around.  Let's disable LPM on all WD devices which match one of the
known problematic model prefixes and are SATA-I.

As horkage list doesn't support matching SATA capabilities, this is
implemented as two horkages - WD_BROKEN_LPM and NOLPM.  The former is
set for the known prefixes and sets the latter if the matched device
is SATA-I.

Note that this isn't optimal as this disables all LPM operations and
partial link power state reportedly works fine on these; however, the
way LPM is implemented in libata makes it difficult to precisely map
libata LPM setting to specific link power state.  Well, these devices
are already fairly outdated.  Let's just disable whole LPM for now.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-and-tested-by: Nikos Barkas <levelwol@gmail.com>
Reported-and-tested-by: Ioannis Barkas <risc4all@yahoo.com>
References: https://bugzilla.kernel.org/show_bug.cgi?id=57211
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoARM: mvebu: update the SATA compatible string for Armada 370/XP
Simon Guinot [Tue, 14 Jan 2014 19:10:27 +0000 (20:10 +0100)]
ARM: mvebu: update the SATA compatible string for Armada 370/XP

commit a96cc303e42ad7830dde929aad0046e448a05505 upstream.

This patch updates the Armada 370/XP SATA node with the new compatible
string "marvell,armada-370-sata".

Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory Clement <gregory.clement@free-electrons.com>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Lior Amsalem <alior@marvell.com>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoata: sata_mv: fix disk hotplug for Armada 370/XP SoCs
Lior Amsalem [Tue, 14 Jan 2014 19:09:57 +0000 (20:09 +0100)]
ata: sata_mv: fix disk hotplug for Armada 370/XP SoCs

commit 9013d64e661fc2a37a1742670202171c27fef4b5 upstream.

On Armada 370/XP SoCs, once a disk is removed from a SATA port, then the
re-plug events are not detected by the sata_mv driver. This patch fixes
the issue by updating the PHY speed in the LP_PHY_CTL register (0x58)
according to the SControl speed.

Note that this fix is only applied if the compatible string
"marvell,armada-370-sata" is found in the SATA DT node.

Fixes: 9ae6f740b49f ("arm: mach-mvebu: add support for Armada 370 and Armada XP with DT")
Signed-off-by: Lior Amsalem <alior@marvell.com>
Signed-off-by: Nadav Haklai <nadavh@marvell.com>
Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory Clement <gregory.clement@free-electrons.com>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoata: sata_mv: introduce compatible string "marvell, armada-370-sata"
Simon Guinot [Tue, 14 Jan 2014 19:04:39 +0000 (20:04 +0100)]
ata: sata_mv: introduce compatible string "marvell, armada-370-sata"

commit b1f5c73bd5a4752efb7d7af019034044b08aafe9 upstream.

The sata_mv driver supports the SATA IP found in several Marvell SoCs.
As some new SATA registers have been introduced with the Armada 370/XP
SoCs, a way to identify them is needed.

This patch introduces a new compatible string for the SATA IP found in
Armada 370/XP SoCs.

Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory Clement <gregory.clement@free-electrons.com>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Lior Amsalem <alior@marvell.com>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoima: change the default hash algorithm to SHA1 in ima_eventdigest_ng_init()
Roberto Sassu [Fri, 8 Nov 2013 18:21:35 +0000 (19:21 +0100)]
ima: change the default hash algorithm to SHA1 in ima_eventdigest_ng_init()

commit c502c78ba7fb5b9cef71e2bd70f12c38ef26e5ab upstream.

Replace HASH_ALGO__LAST with HASH_ALGO_SHA1 as the initial value of
the hash algorithm so that the prefix 'sha1:' is added to violation
digests.

Fix commit:
  4d7aeee ima: define new template ima-ng and template fields d-ng and n-ng

Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agotpm/tpm_ppi: Do not compare strcmp(a,b) == -1
Peter Huewe [Wed, 30 Oct 2013 19:46:55 +0000 (20:46 +0100)]
tpm/tpm_ppi: Do not compare strcmp(a,b) == -1

commit 747d35bd9bb4ae6bd74b19baa5bbe32f3e0cee11 upstream.

Depending on the implementation strcmp might return the difference between
two strings not only -1,0,1 consequently
 if (strcmp (a,b) == -1)
might lead to taking the wrong branch

-> compare with < 0  instead,
which in any case is more canonical.

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agotpm/tpm_i2c_stm_st33: Check return code of get_burstcount
Peter Huewe [Tue, 29 Oct 2013 23:54:20 +0000 (00:54 +0100)]
tpm/tpm_i2c_stm_st33: Check return code of get_burstcount

commit 85c5e0d451125c6ddb78663972e40af810b83644 upstream.

The 'get_burstcount' function can in some circumstances 'return -EBUSY' which
in tpm_stm_i2c_send is stored in an 'u32 burstcnt'
thus converting the signed value into an unsigned value, resulting
in 'burstcnt' being huge.
Changing the type to u32 only does not solve the problem as the signed
value is converted to an unsigned in I2C_WRITE_DATA, resulting in the
same effect.

Thus
-> Change type of burstcnt to u32 (the return type of get_burstcount)
-> Add a check for the return value of 'get_burstcount' and propagate a
potential error.

This makes also sense in the 'I2C_READ_DATA' case, where the there is no
signed/unsigned conversion.

found by coverity
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoALSA: hda/hdmi - allow PIN_OUT to be dynamically enabled
Stephen Warren [Thu, 30 Jan 2014 18:52:16 +0000 (11:52 -0700)]
ALSA: hda/hdmi - allow PIN_OUT to be dynamically enabled

commit 75fae117a5dbde5ab984fa5c60705758cfbc6433 upstream.

Commit 384a48d71520 "ALSA: hda: HDMI: Support codecs with fewer cvts
than pins" dynamically enabled each pin widget's PIN_OUT only when the
pin was actively in use. This was required on certain NVIDIA CODECs for
correct operation. Specifically, if multiple pin widgets each had their
mux input select the same audio converter widget and each pin widget had
PIN_OUT enabled, then only one of the pin widgets would actually receive
the audio, and often not the one the user wanted!

However, this apparently broke some Intel systems, and commit
6169b673618b "ALSA: hda - Always turn on pins for HDMI/DP" reverted the
dynamic setting of PIN_OUT. This in turn broke the afore-mentioned NVIDIA
CODECs.

This change supports either dynamic or static handling of PIN_OUT,
selected by a flag set up during CODEC initialization. This flag is
enabled for all recent NVIDIA GPUs.

Reported-by: Uosis <uosisl@gmail.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoALSA: hda - add headset mic detect quirks for another Dell laptop
Hui Wang [Thu, 30 Jan 2014 02:55:51 +0000 (10:55 +0800)]
ALSA: hda - add headset mic detect quirks for another Dell laptop

commit 5e87d5807110afd6bd659e1b98929fab43f3732f upstream.

When we plug a 3-ring headset on the Dell machine (Vendor ID:
0x10ec0255, Subsystem ID: 0x1028064d), the headset mic can't be
detected, after apply this patch, the headset mic can work well.

BugLink: https://bugs.launchpad.net/bugs/1260303
Cc: David Henningsson <david.henningsson@canonical.com>
Tested-by: Doro Wu <fan-cheng.wu@canonical.com>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoALSA: hda - Fix silent output on MacBook Air 1,1
Adrien Vergé [Fri, 24 Jan 2014 19:56:14 +0000 (14:56 -0500)]
ALSA: hda - Fix silent output on MacBook Air 1,1

commit e7729a415315fcd9516912050d85d5aaebcededc upstream.

Similarly to other Apple products, MBA 1,1 needs a specific quirk.
Pin 0x18 must be set to VREF_50 to have sound output.  This was no
longer done since commit 1a97b7f, resulting in a mute built-in speaker.

This patch corrects the regression by creating a fixup for the MBA 1,1.

Fixes: 1a97b7f22774 ("ALSA: hda/realtek - Remove the last static quirks for ALC882")
Tested-by: Adrien Vergé <adrienverge@gmail.com>
Signed-off-by: Adrien Vergé <adrienverge@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoALSA: bits vs bytes bug in snd_card_create()
Dan Carpenter [Thu, 23 Jan 2014 08:21:28 +0000 (11:21 +0300)]
ALSA: bits vs bytes bug in snd_card_create()

commit 4c3773eda49c872a3034382f8ec3080002e715bf upstream.

The test here is intended intended to prevent shift wrapping bugs when
we do "1U << idx2".  We should consider the number of bits in a u32
instead of the number of bytes.

[fix another chunk similarly by tiwai]

Fixes: 7bb2491b35a2 ('ALSA: Add kconfig to specify the max card numbers')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoALSA: hda - add headset mic detect quirks for some Dell machines
Hui Wang [Thu, 16 Jan 2014 07:51:10 +0000 (15:51 +0800)]
ALSA: hda - add headset mic detect quirks for some Dell machines

commit c48ae0ab3790efba2dfb1a4709c0ef8da024de1a upstream.

When we plug a 3-ring headset on some Dell machines, the headset
mic can't be detected, after apply this patch, the headset mic
can work well on all those machines.

On the machine with the Subsytem ID 0x10280610, if we use
ALC269_FIXUP_DELL1_MIC_NO_PRESENCE, the headset mic can be
detected and work well, but the sound can't be outputed via
headphone anymore, use ALC269_FIXUP_DELL3_MIC_NO_PRESENCE
can fix this problem.

BugLink: https://bugs.launchpad.net/bugs/1260303
Cc: David Henningsson <david.henningsson@canonical.com>
Tested-by: David Chen <david.chen@canonical.com>
Tested-by: Cyrus Lien <cyrus.lien@canonical.com>
Tested-by: Shawn Wang <shawn.wang@canonical.com>
Tested-by: Chih-Hsyuan Ho <chih.ho@canonical.com>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoALSA: hda - automute via amp instead of pinctl on some AIO models
Hui Wang [Tue, 14 Jan 2014 06:07:36 +0000 (14:07 +0800)]
ALSA: hda - automute via amp instead of pinctl on some AIO models

commit 493a52a9b6645f61954580c7d4bd52fa62110934 upstream.

On some AIO (All In One) models with the codec alc668
(Vendor ID: 0x10ec0668) on it, when we plug a headphone into the jack,
the system will switch the output to headphone and set the speaker to
automute as well as change the speaker Pin-ctls from 0x40 to 0x00,
this will bring loud noise to the headphone.

I tried to disable the corresponding EAPD, but it did not help to
eliminate the noise.

According to Takashi's suggestion, we use amp operation to replace the
pinctl modification for the automute, this really eliminate the noise.

BugLink: https://bugs.launchpad.net/bugs/1268468
Cc: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoALSA: Enable CONFIG_ZONE_DMA for smaller PCI DMA masks
Takashi Iwai [Fri, 10 Jan 2014 13:20:42 +0000 (14:20 +0100)]
ALSA: Enable CONFIG_ZONE_DMA for smaller PCI DMA masks

commit 80ab8eae70e51d578ebbeb228e0f7a562471b8b7 upstream.

The PCI devices with DMA masks smaller than 32bit should enable
CONFIG_ZONE_DMA.  Since the recent change of page allocator, page
allocations via dma_alloc_coherent() with the limited DMA mask bits
may fail more frequently, ended up with no available buffers, when
CONFIG_ZONE_DMA isn't enabled.  With CONFIG_ZONE_DMA, the system has
much more chance to obtain such pages.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=68221
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoALSA: hda - Don't create duplicated ctls for loopback paths
Takashi Iwai [Tue, 7 Jan 2014 17:11:44 +0000 (18:11 +0100)]
ALSA: hda - Don't create duplicated ctls for loopback paths

commit 43a8e50a46a4e1dd1451e4a4ffa1f7695fb7d287 upstream.

AD1986A mic pins (0x1d and 0x1f) share the same widget for controlling
the loopback volume/mute, but the generic parser didn't check it.
This ended up with the duplicated controls for the same effect.

This patch adds the check of the duplication for avoiding it.

After this fix, there will be only one control although it affects
both paths; this remaining issue should be fixed later in a different
patch.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=66621
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoALSA: hda - Correct AD1986A 3stack pin configs
Takashi Iwai [Tue, 7 Jan 2014 16:48:11 +0000 (17:48 +0100)]
ALSA: hda - Correct AD1986A 3stack pin configs

commit ed0e0d0617a8dc3d8b82c6e54827f269f2247b07 upstream.

The 3stack pin configs for AD1986A codec had incorrect values that
resulted in broken mic and line-in.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=66621
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoALSA: rme9652: fix a missing comma in channel_map_9636_ds[]
Takashi Iwai [Thu, 26 Dec 2013 22:13:08 +0000 (00:13 +0200)]
ALSA: rme9652: fix a missing comma in channel_map_9636_ds[]

commit 770bd4bf2e664939a9dacd3d26ec9ff7a3933210 upstream.

The lack of comma leads to the wrong channel for an SPDIF channel.
Unfortunately this wasn't caught by compiler because it's still a
valid expression.

Reported-by: Alexander Aristov <aristov.alexander@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoASoC: wm5110: Extend SYSCLK patch file for rev D
Charles Keepax [Tue, 21 Jan 2014 16:27:51 +0000 (16:27 +0000)]
ASoC: wm5110: Extend SYSCLK patch file for rev D

commit 34354792432b6e0a3b156819a1a19716c50d3473 upstream.

Latest evaluation of the the device has given some patch file additions
for improved performance.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoASoC: tlv320aic32x4: Fix regmap range_min
Markus Pargmann [Wed, 15 Jan 2014 17:12:40 +0000 (18:12 +0100)]
ASoC: tlv320aic32x4: Fix regmap range_min

commit e8e08c521dc101cf7e7e1caf4f487f9fe11a9a7a upstream.

range_min is the lowest address in the virtual register range. This is
the first register with address 0, not the first register of page 1.

Currently all writes to page 1 are mapped to page 0, so the codec fails
to operate.

Fixes: 4d208ca429ad (ASoC: tlv320aic32x4: Convert to direct regmap API usage)
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoASoC: codec: tlv320aic32x4: Fix regmap range config
Markus Pargmann [Sat, 11 Jan 2014 13:48:30 +0000 (14:48 +0100)]
ASoC: codec: tlv320aic32x4: Fix regmap range config

commit 6d0d5103bdc45242b8d02e4130fbe5a3ea9f668a upstream.

This codec driver fails to probe because it has a higher regmap
range_max value than max_register. This patch sets the range_max to the
max_register value as described in the for struct regmap_range_cfg:
"@range_max: Address of the highest register in virtual range."

Fixes: 4d208ca429ad (ASoC: tlv320aic32x4: Convert to direct regmap API usage)
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoASoC: adau1701: Fix ADAU1701_SEROCTL_WORD_LEN_16 constant
Lars-Peter Clausen [Wed, 8 Jan 2014 10:22:25 +0000 (11:22 +0100)]
ASoC: adau1701: Fix ADAU1701_SEROCTL_WORD_LEN_16 constant

commit e20970ada3f699c113fe64b04492af083d11a7d8 upstream.

The driver defines ADAU1701_SEROCTL_WORD_LEN_16 as 0x10 while it should be b10,
so 0x2. This patch fixes it.

Reported-by: Magnus Reftel <magnus.reftel@lockless.no>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agomfd: max77686: Fix regmap resource leak on driver remove
Krzysztof Kozlowski [Fri, 20 Dec 2013 09:35:07 +0000 (10:35 +0100)]
mfd: max77686: Fix regmap resource leak on driver remove

commit 74142ffc0b52cfe6f9d2f6f34a5f3eedbfe3ce51 upstream.

The regmap used by max77686 MFD driver was not freed with regmap_exit()
on driver exit. This lead to leak of resources.

Replace regmap_init_i2c() call in driver probe with initialization of
managed register map so the regmap will be properly freed by the device
management code.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoperf kvm: Fix kvm report without guestmount.
Dongsheng Yang [Fri, 20 Dec 2013 18:41:47 +0000 (13:41 -0500)]
perf kvm: Fix kvm report without guestmount.

commit ad85ace07a05062ef6b59c35a5e80b6eaee1eee6 upstream.

Currently, if we use perf kvm --guestkallsyms --guestmodules report, we
can not get the perf information from perf data file. All sample are
shown as unknown.

Reproducing steps:
# perf kvm --guestkallsyms /tmp/kallsyms --guestmodules /tmp/modules record -a sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.624 MB perf.data.guest (~27260 samples) ]
# perf kvm --guestkallsyms /tmp/kallsyms --guestmodules /tmp/modules report |grep %
   100.00%  [guest/6471]  [unknown]         [g] 0xffffffff8164f330

This bug was introduced by 207b57926 (perf kvm: Fix regression with guest machine creation).
In original code, it uses perf_session__find_machine(), it means we deliver symbol to machine
which has the same pid, if no machine found, deliver it to *default* guest. But if we use
perf_session__findnew_machine() here, if no machine was found, new machine with pid will be built
and added. Then the default guest which with pid == 0 will never get a symbol.

And because the new machine initialized here has no kernel map created, the symbol delivered to
it will be marked as "unknown".

This patch here is to revert commit 207b57926 and fix the SEGFAULT bug in another way.

Verification steps:
# ./perf kvm --guestkallsyms /home/kallsyms --guestmodules /home/modules record -a sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.651 MB perf.data.guest (~28437 samples) ]
# ./perf kvm --guestkallsyms /home/kallsyms --guestmodules /home/modules report |grep %
    22.64%    :6471  [guest.kernel.kallsyms]  [g] update_rq_clock.part.70
    19.99%    :6471  [guest.kernel.kallsyms]  [g] d_free
    18.46%    :6471  [guest.kernel.kallsyms]  [g] bio_phys_segments
    16.25%    :6471  [guest.kernel.kallsyms]  [g] dequeue_task
    12.78%    :6471  [guest.kernel.kallsyms]  [g] __switch_to
     7.91%    :6471  [guest.kernel.kallsyms]  [g] scheduler_tick
     1.75%    :6471  [guest.kernel.kallsyms]  [g] native_apic_mem_write
     0.21%    :6471  [guest.kernel.kallsyms]  [g] apic_timer_interrupt

Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1387564907-3045-1-git-send-email-yangds.fnst@cn.fujitsu.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agopinctrl: sunxi: Honor GPIO output initial vaules
Chen-Yu Tsai [Thu, 16 Jan 2014 06:34:23 +0000 (14:34 +0800)]
pinctrl: sunxi: Honor GPIO output initial vaules

commit fa8cf57c923e86a693a85aff1df579245a27cbb3 upstream.

Some GPIO users, such as fixed-regulator, request GPIO output with
initial value of 1. This was ignored by sunxi driver.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agomisc: mic: bug fix for interrupt acknowledgement in MSI/INTx case.
Dasaratharaman Chandramouli [Tue, 10 Dec 2013 17:51:12 +0000 (09:51 -0800)]
misc: mic: bug fix for interrupt acknowledgement in MSI/INTx case.

commit df5e4e8b576108f88f79e5b4c984d51d460d2360 upstream.

The interrupt handler (mic_interrupt), called in the MSI/INTx mode,
writes to the interrupt sources register to acknowledge the
interrupt and then calls the corresponding callback handlers to handle
the same. These callback handlers acknowledge the interrupts again
leading to missed interrupts. This patch fixes the issue by removing
the interrupt acknowlegment code from the callback handlers.

Reviewed-by: Sudeep Dutt <sudeep.dutt@intel.com>
Reviewed-by: Nikhil Rao <nikhil.rao@intel.com>
Reviewed-by: Siva Krishna Kumar Reddy Yerramreddy <siva.krishna.kumar.reddy.yerramreddy@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agortc: max8907: weekday encoding fixes
Stephen Warren [Thu, 23 Jan 2014 23:55:19 +0000 (15:55 -0800)]
rtc: max8907: weekday encoding fixes

commit 75ea799df4cb07e505c91b4abaa87bc28aad3e66 upstream.

The current MAX8907 driver has two issues related to weekday value
handling:

1)

The HW WEEKDAY register has range 0..6 rather than 1..7 as documented.
Note that I validated the actual HW range by observing the HW register
roll from 6->0 rather than 6->7->1 as would otherwise be expected.

This matches Linux's tm_wday range of 0..6.

When the CMOS RAM content is lost, the date returned from the device is
2007-01-01 00:00:00, which is a Monday.  The WEEKDAY register reads 1 in
this case.  This matches the numbering in Linux's tm_wday field.

Hence we should write Linux's tm_wday value to the register without
modifying it.  Hence, remove the +1/-1 calculations for WEEKDAY/tm_wday.

2)

There's no need to make alarms match on the WEEKDAY register, since the
other fields together uniquely define the alarm date/time.  Ignoring the
WEEKDAY value in the match isolates the driver from any incorrect value in
the current time copy of the WEEKDAY register.

Each change individually, or both together, solves an issue that I
observed; "hwclock -r" would time out waiting for its alarm to fire if the
CMOS RAM content had been lost, and hence the WEEKDAY register value
mismatched what the driver expected it to be.  "hwclock -w" would solve
this by over-writing the HW default WEEKDAY register value with what the
driver expected.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoparport: parport_pc: remove double PCI ID for NetMos
Sebastian Andrzej Siewior [Wed, 27 Nov 2013 16:43:43 +0000 (17:43 +0100)]
parport: parport_pc: remove double PCI ID for NetMos

commit d6a484520c5572a4170fa915109ccfc0c38f5008 upstream.

In commit 85747f ("PATCH] parport: add NetMOS 9805 support") Max added
the PCI ID for NetMOS 9805 based on a Debian bug report from 2k4 which
was at the v2.4.26 time frame. The patch made into 2.6.14.
Shortly before that patch akpm merged commit 296d3c783b ("[PATCH] Support
NetMOS based PCI cards providing serial and parallel ports") which made
into v2.6.9-rc1.
Now we have two different entries for the same PCI id.
I have here the NetMos 9805 which claims to support SPP/EPP/ECP mode.
This patch takes Max's entry for titan_1284p1 (base != -1 specifies the
ioport for ECP mode) and replaces akpm's entry for netmos_9805 which
specified -1 (=none). Both share the same PCI-ID (my card has subsystem
0x1000 / 0x0020 so it should match PCI_ANY).

While here I also drop the entry for titan_1284p2 which is the same as
netmos_9815.

Cc: Maximilian Attems <maks@stro.at>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agos390/uapi: fix struct statfs64 definition
Heiko Carstens [Tue, 21 Jan 2014 16:31:10 +0000 (17:31 +0100)]
s390/uapi: fix struct statfs64 definition

commit 4e078146dff728f4865270a47710d57797e81eb6 upstream.

With b8668fd0a7e1b59f "s390/uapi: change struct statfs[64] member types
to unsigned values" the size of a couple of struct statfs64 member got
incorrectly changed from 64 to 32 bit for 32 bit builds.

Fix this by changing the type of couple of struct statfs64 members from
unsigned long to unsigned long long.
The definition of struct compat_statfs64 was correct however.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoKVM: s390: ioeventfd: ignore leftmost bits
Dominik Dingel [Mon, 9 Dec 2013 17:30:01 +0000 (18:30 +0100)]
KVM: s390: ioeventfd: ignore leftmost bits

commit ff1f3cb4b3ac5d039f02679f34cb1498d110d241 upstream.

The diagnose 500 subcode 3 contains the 32 bit subchannel id in bits 32-63
(counting from the left). As for other I/O instructions, bits 0-31 should be
ignored and thus not be passed to kvm_io_bus_write_cookie().

This fixes a bug where the guest passed non-zero bits 0-31 which the
host tried to interpret, leading to ioeventfd notification failures.

Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoKVM: s390: fix diagnose code extraction
Heiko Carstens [Mon, 11 Nov 2013 12:56:47 +0000 (13:56 +0100)]
KVM: s390: fix diagnose code extraction

commit 743db27c526e0f31cc507959d662e97e2048a86f upstream.

The diagnose code to be used is the contents of the base register (if not
zero), plus the displacement. The current code ignores the base register
contents. So let's fix that...

Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoKVM: s390: Always store status during SIGP STOP_AND_STORE_STATUS
Thomas Huth [Wed, 6 Nov 2013 14:46:33 +0000 (15:46 +0100)]
KVM: s390: Always store status during SIGP STOP_AND_STORE_STATUS

commit e879892c725217a4af1012f31ae56be762473216 upstream.

The SIGP order STOP_AND_STORE_STATUS is defined to stop a CPU and store
its status. However, we only stored the status if the CPU was still
running, so make sure that the status is now also stored if the CPU was
already stopped. This fixes the problem that the CPU information was
not stored correctly in kdump files, rendering them unreadable.

Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agos390/compat: fix PSW32_USER_BITS definition
Heiko Carstens [Mon, 13 Jan 2014 12:35:16 +0000 (13:35 +0100)]
s390/compat: fix PSW32_USER_BITS definition

commit 075dfd82102d2048e43e1cbf48d558d915c50072 upstream.

PSW32_USER_BITS should define the primary address space for user space
instead of the home address space.
Symptom of this bug is that gdb doesn't work in compat mode.

The bug was introduced with e258d719ff28 "s390/uaccess: always run the kernel
in home space" and f26946d7ecad "s390/compat: make psw32_user_bits a constant
value again".

Reported-by: Andreas Arnez <arnez@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoserial: 8250: enable UART_BUG_NOMSR for Tegra
Stephen Warren [Tue, 7 Jan 2014 22:00:12 +0000 (15:00 -0700)]
serial: 8250: enable UART_BUG_NOMSR for Tegra

commit 3685f19e07802ec4207b52465c408f185b66490e upstream.

Tegra chips have 4 or 5 identical UART modules embedded. UARTs C..E have
their MODEM-control signals tied off to a static state. However UARTs A
and B can optionally route those signals to/from package pins, depending
on the exact pinmux configuration.

When these signals are not routed to package pins, false interrupts may
trigger either temporarily, or permanently, all while not showing up in
the IIR; it will read as NO_INT. This will eventually lead to the UART
IRQ being disabled due to unhandled interrupts. When this happens, the
kernel may print e.g.:

    irq 68: nobody cared (try booting with the "irqpoll" option)

In order to prevent this, enable UART_BUG_NOMSR. This prevents
UART_IER_MSI from being enabled, which prevents the false interrupts
from triggering.

In practice, this is not needed under any of the following conditions:

* On Tegra chips after Tegra30, since the HW bug has apparently been
  fixed.

* On UARTs C..E since their MODEM control signals are tied to the correct
  static state which doesn't trigger the issue.

* On UARTs A..B if the MODEM control signals are routed out to package
  pins, since they will then carry valid signals.

However, we ignore these exceptions for now, since they are only relevant
if a board actually hooks up more than a 4-wire UART, and no currently
supported board does this. If we ever support a board that does, we can
refine the algorithm that enables UART_BUG_NOMSR to take those exceptions
into account, and/or read a flag from DT/... that indicates that the
board has hooked up and pinmux'd more than a 4-wire UART.

Reported-by: Olof Johansson <olof@lixom.net> # autotester
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoserial: 8250: Fix initialisation of Quatech cards with the AMCC PCI chip
Jonathan Woithe [Mon, 9 Dec 2013 06:03:08 +0000 (16:33 +1030)]
serial: 8250: Fix initialisation of Quatech cards with the AMCC PCI chip

commit 9c5320f8d7d9a2cf623e65d50e1113f34d9b9eb1 upstream.

Fix the initialisation of older Quatech serial cards which are fitted with
the AMCC PCI Matchmaker interface chip.

Signed-off-by: Jonathan Woithe (jwoithe@just42.net)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoserial: add support for 200 v3 series Titan card
Yegor Yefremov [Mon, 9 Dec 2013 11:11:15 +0000 (12:11 +0100)]
serial: add support for 200 v3 series Titan card

commit 48c0247d7b7bf58abb85a39021099529df365c4d upstream.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agouio: fix devm_request_irq usage
Aaro Koskinen [Fri, 20 Dec 2013 14:19:47 +0000 (16:19 +0200)]
uio: fix devm_request_irq usage

commit 632fefaf1fff7c344191c363e08a43cf006fe60e upstream.

Commit e6789cd3dfb553077606ccafeb05e0043f072481 (uio: Simplify uio error
path by using devres functions) converted uio to use devm_request_irq().
This introduced a change in behaviour since the IRQ is associated with
the parent device instead of the created UIO device. The IRQ will remain
active after uio_unregister_device() is called, and some drivers will
crash because of this. The patch fixes this.

Signed-off-by: Aaro Koskinen <aaro.koskinen@nsn.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoxhci: Set scatter-gather limit to avoid failed block writes.
Sarah Sharp [Mon, 6 Jan 2014 21:07:03 +0000 (13:07 -0800)]
xhci: Set scatter-gather limit to avoid failed block writes.

commit f2d9b991c549f159dc9ae81f77d8206c790cbfee upstream.

Commit 35773dac5f862cb1c82ea151eba3e2f6de51ec3e "usb: xhci: Link TRB
must not occur within a USB payload burst" attempted to fix an issue
found with USB ethernet adapters, and inadvertently broke USB storage
devices.  The patch attempts to ensure that transfers never span a
segment, and rejects transfers that have more than 63 entries (or
possibly less, if some entries cross 64KB boundaries).

usb-storage limits the maximum transfer size to 120K, and we had assumed
the block layer would pass a scatter-gather list of 4K entries,
resulting in no more than 31 sglist entries:

http://marc.info/?l=linux-usb&m=138498190419312&w=2

That assumption was wrong, since we've seen the driver reject a write
that was 218 sectors long (of probably 512 bytes each):

Jan  1 07:04:49 jidanni5 kernel: [  559.624704] xhci_hcd 0000:00:14.0: Too many fragments 79, max 63
...
Jan  1 07:04:58 jidanni5 kernel: [  568.622583] Write(10): 2a 00 00 06 85 0e 00 00 da 00

Limit the number of scatter-gather entries to half a ring segment.  That
should be margin enough in case some entries cross 64KB boundaries.
Increase the number of TRBs per segment from 64 to 256, which should
result in ring segments fitting on a 4K page.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Reported-by: jidanni@jidanni.org
References: http://bugs.debian.org/733907
Fixes: 35773dac5f86 ('usb: xhci: Link TRB must not occur within a USB payload burst')
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoxhci: Avoid infinite loop when sg urb requires too many trbs
Ben Hutchings [Mon, 6 Jan 2014 03:16:32 +0000 (03:16 +0000)]
xhci: Avoid infinite loop when sg urb requires too many trbs

commit d6c9ea9069af684358efedcaf2f2f687f51c58ee upstream.

Currently prepare_ring() returns -ENOMEM if the urb won't fit into a
single ring segment.  usb_sg_wait() treats this error as a temporary
condition and will keep retrying until something else goes wrong.

The number of retries should be limited in usb_sg_wait(), but also
prepare_ring() should not return an error code that suggests it might
be worth retrying.  Change it to -EINVAL.

Reported-by: jidanni@jidanni.org
References: http://bugs.debian.org/733907
Fixes: 35773dac5f86 ('usb: xhci: Link TRB must not occur within a USB payload burst')
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agohwmon: (k10temp) Add support for Kaveri CPUs
Phil Pokorny [Tue, 14 Jan 2014 18:46:46 +0000 (10:46 -0800)]
hwmon: (k10temp) Add support for Kaveri CPUs

commit d303b1b5fbb688282bbf72a534b9dfed7af9fe4f upstream.

Add new PCI ID to support new model "Kaveri" family.

Signed-off-by: Philip Pokorny <ppokorny@penguincomputing.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoARM: at91: smc: bug fix in sam9_smc_cs_read()
Jean-Jacques Hiblot [Thu, 9 Jan 2014 15:01:54 +0000 (16:01 +0100)]
ARM: at91: smc: bug fix in sam9_smc_cs_read()

commit 1588c51cf6d782e63a8719681d905ef0ac22ee62 upstream.

There was a copy/paste error when reading the nwe_pulse value.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@traphandler.com>
Acked-by: Boris BREZILLON <b.brezillon@overkiz.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoARM: at91: at91sam9g45: set default mmc pinctrl-names
Ludovic Desroches [Fri, 22 Nov 2013 13:49:52 +0000 (14:49 +0100)]
ARM: at91: at91sam9g45: set default mmc pinctrl-names

commit 0645b93f6c223b594c0dca348e2ae0a23bccf6e3 upstream.

pinctrl-names property was missing from mmc nodes.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agotty/serial: at91: disable uart timer at start of shutdown
Marek Roszko [Fri, 10 Jan 2014 09:33:11 +0000 (10:33 +0100)]
tty/serial: at91: disable uart timer at start of shutdown

commit 8bc661bfc0c2d221e209f4205bdaaf574d50100c upstream.

The uart timer will schedule a tasklet when it fires. It is possible that it
can fire inside _shutdown before it is killed in the dma and pdc cleanup
routines. This causes a tasklet that exists after the port is shutdown, so when
the kernel finally executes it, it panics as the tty port is NULL.

This is a somewhat rare condition but its possible if a program keeps on
opening/closing the port. It has been observed in particular with systemd
boot messages that were causing a kernel panic because of this behavior.

Moving the timer deletion to the beginning of the function stops a tasklet from
being scheduled unexpectedly.

Signed-off-by: Marek Roszko <mark.roszko@gmail.com>
[nicolas.ferre@atmel.com: modify commit message, call setup_timer() in any case]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agotty/serial: at91: reset rx_ring when port is shutdown
Mark Deneen [Tue, 7 Jan 2014 10:45:09 +0000 (11:45 +0100)]
tty/serial: at91: reset rx_ring when port is shutdown

commit bb7e73c598fb226c75f7625088a8f6a45a0fc892 upstream.

When using RX DMA, the driver won't pass any data to the uart layer
until the buffer is flipped. When the port is shutdown, the dma buffers
are unmapped, but the head and tail of the ring buffer are not reseted.
Since the serial console will keep the port open, this will only
present itself when the uart is not shared.

To reproduce the issue, with an unpatched driver, run a getty on /dev/ttyS0
with no serial console and exit. Getty will exit, and when the new one returns
you will be unable to log in.  If you hold down a key long enough to fill the
DMA buffer and flip it, you can then log in.

Signed-off-by: Mark Deneen <mdeneen@gmail.com>
Acked-by: Leilei Zhao <leilei.zhao@atmel.com>
[nicolas.ferre@atmel.com: adapt to mainline kernel, handle !DMA case]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agotty/serial: at91: fix race condition in atmel_serial_remove
Marek Roszko [Tue, 7 Jan 2014 10:45:07 +0000 (11:45 +0100)]
tty/serial: at91: fix race condition in atmel_serial_remove

commit f50c995f9ebf064cea1368bf361c4e29679415b4 upstream.

The _remove callback could be called when a tasklet is scheduled. tasklet_kill
was called inside the function in order to free up any scheduled tasklets.
However it was called after uart_remove_one_port which destroys tty references
needed in the port for atmel_tasklet_func.
Simply putting the tasklet_kill at the start of the function will prevent this
conflict.

Signed-off-by: Marek Roszko <mark.roszko@gmail.com>
Acked-by: Leilei Zhao <leilei.zhao@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agotty/serial: at91: Handle shutdown more safely
Marek Roszko [Tue, 7 Jan 2014 10:45:06 +0000 (11:45 +0100)]
tty/serial: at91: Handle shutdown more safely

commit 0cc7c6c7916b1b6f34350ff1473b80b9f7e459c0 upstream.

Interrupts were being cleaned up late in the shutdown handler, it is possible
that an interrupt can occur and schedule a tasklet that runs after the port is
cleaned up. There is a null dereference due to this race condition with the
following stacktrace:

[<c02092b0>] (atmel_tasklet_func+0x514/0x814) from [<c001fd34>] (tasklet_action+0x70/0xa8)
[<c001fd34>] (tasklet_action+0x70/0xa8) from [<c001f60c>] (__do_softirq+0x90/0x144)
[<c001f60c>] (__do_softirq+0x90/0x144) from [<c001fa18>] (irq_exit+0x40/0x4c)
[<c001fa18>] (irq_exit+0x40/0x4c) from [<c000e298>] (handle_IRQ+0x64/0x84)
[<c000e298>] (handle_IRQ+0x64/0x84) from [<c000d6c0>] (__irq_svc+0x40/0x50)
[<c000d6c0>] (__irq_svc+0x40/0x50) from [<c0208060>] (atmel_rx_dma_release+0x88/0xb8)
[<c0208060>] (atmel_rx_dma_release+0x88/0xb8) from [<c0209740>] (atmel_shutdown+0x104/0x160)
[<c0209740>] (atmel_shutdown+0x104/0x160) from [<c0205e8c>] (uart_port_shutdown+0x2c/0x38)

Signed-off-by: Marek Roszko <mark.roszko@gmail.com>
Acked-by: Leilei Zhao <leilei.zhao@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agomei: use hbm idle state to prevent spurious resets
Tomas Winkler [Wed, 8 Jan 2014 18:19:22 +0000 (20:19 +0200)]
mei: use hbm idle state to prevent spurious resets

commit 66ae460b13c31a176b41550259683c841a62af3e upstream.

When reset is caused by hbm protocol mismatch or timeout
we might end up in an endless reset loop and hbm protocol
will never sync

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agostaging: vt6656: CARDqGetNextTBTT correct uLowNextTBTT
Malcolm Priestley [Wed, 1 Jan 2014 19:19:28 +0000 (19:19 +0000)]
staging: vt6656: CARDqGetNextTBTT correct uLowNextTBTT

commit 9acec059c0cef0bf086c738f4c0b1f4447782a48 upstream.

value uLowNextTBTT yields wrong value.

ULL is needed with qwTSF

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agostaging: vt6656: [BUG] BBvUpdatePreEDThreshold Always set sensitivity on bScanning
Malcolm Priestley [Sun, 8 Dec 2013 09:11:30 +0000 (09:11 +0000)]
staging: vt6656: [BUG] BBvUpdatePreEDThreshold Always set sensitivity on bScanning

commit 8f248dae133668bfb8e9379b4b3f0571c858b24a upstream.

byBBPreEDIndex value is initially 0, this means that from
cold BBvUpdatePreEDThreshold is never set.

This means that sensitivity may be in an ambiguous state,
failing to scan any wireless points or at least distant ones.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agostaging: r8712u: Set device type to wlan
Larry Finger [Tue, 24 Dec 2013 17:22:54 +0000 (11:22 -0600)]
staging: r8712u: Set device type to wlan

commit 3a21f00a5002b14e4aab52aef59d33ed28468a13 upstream.

The latest version of NetworkManager does not recognize the device as wireless
without this change.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agostaging/lustre/ptlrpc: Fix a crash when dereferencing NULL pointer
Amir Shehata [Tue, 3 Dec 2013 13:58:47 +0000 (21:58 +0800)]
staging/lustre/ptlrpc: Fix a crash when dereferencing NULL pointer

commit 3c92a0bf4d72737035a16c4fe357ccd439c9b7d2 upstream.

When a system runs out of memory and the function
ptlrpc_register_bulk() is called from ptl_send_rpc() the call to
LNetMEAttach() fails due to failure to allocate memory.  This forces
the code into an error path, which most probably previously went
untested.  The error path:
if (rc != 0) {
        CERROR("%s: LNetMEAttach failed x"LPU64"/%d: rc = %dn",
                desc->bd_export->exp_obd->obd_name, xid,
                posted_md, rc);
        break;
}
This print assumes that desc->bd_export is not NULL.  However, it is.
In fact it is expected to be NULL.  desc->bd_import is the correct
structure to access in this case.

Lustre-change: http://review.whamcloud.com/7121
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3585
Signed-off-by: Amir Shehata <amir.shehata@intel.com>
Reviewed-by: Liang Zhen <liang.zhen@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoath9k: Disable cross-band FCC
Sujith Manoharan [Thu, 9 Jan 2014 03:21:15 +0000 (08:51 +0530)]
ath9k: Disable cross-band FCC

commit 1e2f9295f4c657500111514f92a3d3894d0e05b4 upstream.

Fast Channel Change across bands was enabled for
AR9462 recently, but this is causing baseband issues.
Disable it until this feature is tested well. Also,
remove the feature bit for AR9565 since it is
a single-band card and doesn't support this feature.

Reported-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoath9k: Use correct channel for RX packets
Sujith Manoharan [Thu, 9 Jan 2014 03:21:14 +0000 (08:51 +0530)]
ath9k: Use correct channel for RX packets

commit ff9a93f2ebb88ac7aab9568de80b64b92078e96d upstream.

Accessing the current channel definition in mac80211
when processing RX packets is problematic because it
could have been updated when a scan is issued. Since a
channel change involves flushing the existing packets
in the RX queue before a chip-reset is done, they would
be processed using the wrong band/channel information.

To avoid this, use the current channel information
maintained in the driver.

Reported-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agob43: fix the wrong assignment of status.freq in b43_rx()
ZHAO Gang [Fri, 17 Jan 2014 16:17:38 +0000 (00:17 +0800)]
b43: fix the wrong assignment of status.freq in b43_rx()

commit 64e5acb09ca6b50c97299cff9ef51299470b29f2 upstream.

Use the right function to update frequency value.

If rx skb is probe response or beacon, the wrong frequency value can
cause problem that bss info can't be updated when it should be.

Fixes: 8318d78a44d4 ("cfg80211 API for channels/bitrates, mac80211 and driver conversion")
Signed-off-by: ZHAO Gang <gamerh2o@gmail.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agob43legacy: Fix unload oops if firmware is not available
Larry Finger [Sun, 12 Jan 2014 21:11:39 +0000 (15:11 -0600)]
b43legacy: Fix unload oops if firmware is not available

commit 452028665312672c6ba9e16a19248ee00ead9400 upstream.

The asyncronous firmware load uses a completion struct to hold firmware
processing until the user-space routines are up and running. There is.
however, a problem in that the waiter is nevered canceled during teardown.
As a result, unloading the driver when firmware is not available causes an oops.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agob43: Fix unload oops if firmware is not available
Larry Finger [Sun, 12 Jan 2014 21:11:38 +0000 (15:11 -0600)]
b43: Fix unload oops if firmware is not available

commit 0673effd41dba323d6a280ef37b5ef29f3f5a653 upstream.

The asyncronous firmware load uses a completion struct to hold firmware
processing until the user-space routines are up and running. There is.
however, a problem in that the waiter is nevered canceled during teardown.
As a result, unloading the driver when firmware is not available causes an oops.

To be able to access the completion structure at teardown, it had to be moved
into the b43_wldev structure.

This patch also fixes a typo in a comment.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agob43: Fix lockdep splat
Larry Finger [Sun, 12 Jan 2014 21:11:37 +0000 (15:11 -0600)]
b43: Fix lockdep splat

commit 09164043f63c947a49797750a09ca1cd7c31108e upstream.

In https://bugzilla.kernel.org/show_bug.cgi?id=67561, a locking dependency is reported
when b43 is used with hostapd, and rfkill is used to kill the radio output.

The lockdep splat (in part) is as follows:

======================================================
[ INFO: possible circular locking dependency detected ]
3.12.0 #1 Not tainted
-------------------------------------------------------
rfkill/10040 is trying to acquire lock:
 (rtnl_mutex){+.+.+.}, at: [<ffffffff8146f282>] rtnl_lock+0x12/0x20

but task is already holding lock:
 (rfkill_global_mutex){+.+.+.}, at: [<ffffffffa04832ca>] rfkill_fop_write+0x6a/0x170 [rfkill]

--snip--

Chain exists of:
  rtnl_mutex --> misc_mtx --> rfkill_global_mutex

The fix is to move the initialization of the hardware random number generator
outside the code range covered by the rtnl_mutex.

Reported-by: yury <urykhy@gmail.com>
Tested-by: yury <urykhy@gmail.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoiwlwifi: mvm: fix missing cleanup in .start() error path
Eliad Peller [Sun, 5 Jan 2014 10:41:12 +0000 (12:41 +0200)]
iwlwifi: mvm: fix missing cleanup in .start() error path

commit 91b0d1198417cf4fd9a7bd4138b6909f0b359099 upstream.

Cleanup of iwl_mvm_leds was missing in case of error,
resulting in the following warning:

WARNING: at lib/kobject.c:196 kobject_add_internal+0x1f4/0x210()
kobject_add_internal failed for phy0-led with -EEXIST, don't try to register things with the same name in the same directory.

which prevents further reloads of the driver.

Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoiwlwifi: pcie: enable oscillator for L1 exit
Emmanuel Grumbach [Tue, 24 Dec 2013 12:15:41 +0000 (14:15 +0200)]
iwlwifi: pcie: enable oscillator for L1 exit

commit 2d93aee152b1758a94a18fe15d72153ba73b5679 upstream.

Enabling the oscillator consumes slightly more power (100uA)
but allows to make sure that we exit from L1 on time.

Not doing so might lead to a PCIe specification violation
since we might wake up from L1 at the wrong time.
This issue has been identified on 3160 and 7260 only.
On older NICs L1 off is not enabled, on newer NICs (7265),
the issue is fixed.

When the bug occurs the user sees that the NIC has
disappeared from the PCI bridge, any access to the device
returns 0xff.

This fixes:
https://bugzilla.kernel.org/show_bug.cgi?id=64541

and has been extensively discussed here:
http://markmail.org/thread/mfmpzqt3r333n4bo

Fixes: 99cd47142399 ("iwlwifi: add 7000 series device configuration")
Reported-and-tested-by: wzyboy <wzyboy@wzyboy.org>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agomwifiex: fix wrong 11ac bits setting in fw_cap_info
Bing Zhao [Wed, 15 Jan 2014 03:16:34 +0000 (19:16 -0800)]
mwifiex: fix wrong 11ac bits setting in fw_cap_info

commit 1e202242ee1432d68a8bea4919b2ae0ef19d9e06 upstream.

bit 14 is actually reserved and bit 12 & 13 should be used for
11ac capability in fw_cap_info.

Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agomwifiex: add missing endian conversion for fw_tsf
Amitkumar Karwar [Fri, 10 Jan 2014 22:30:41 +0000 (14:30 -0800)]
mwifiex: add missing endian conversion for fw_tsf

commit 9795229752c31da0c5f8a7dc4c827665327b52f9 upstream.

It is u64 data received from firmware. Little endian to cpu
conversion is required here.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agortlwifi: rtl8188ee: Fix typo in code
Larry Finger [Mon, 25 Nov 2013 16:45:28 +0000 (10:45 -0600)]
rtlwifi: rtl8188ee: Fix typo in code

commit f699273d6a624266ebc9198774f06ee64a3847a1 upstream.

The static analyser "cppcheck" shows the following typo:
drivers/net/wireless/rtlwifi/rtl8188ee/dm.c:1081]: (style) Same expression on both sides of '!='.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Reported-by: David Binderman <dcb314@hotmail.com>
Cc: David Binderman <dcb314@hotmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agortlwifi: rtl8192c: Update dynamic gain calculations
Larry Finger [Mon, 18 Nov 2013 17:11:36 +0000 (11:11 -0600)]
rtlwifi: rtl8192c: Update dynamic gain calculations

commit 796e453436b183057e2d7d9b2bcff88d0bf53ba7 upstream.

The vendor driver contained a number of improvements in the gain settings
for the rtl8192c{e,u} devices. This patch implements them in the kernel
driver.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agortlwifi: Add missing code to PWDB statics routine
Larry Finger [Mon, 18 Nov 2013 17:11:35 +0000 (11:11 -0600)]
rtlwifi: Add missing code to PWDB statics routine

commit d82403a9f407217b6aed5260aa92a120e8e98310 upstream.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agortlwifi: rtl8192cu: Fix some code in RF handling
Larry Finger [Mon, 18 Nov 2013 17:11:34 +0000 (11:11 -0600)]
rtlwifi: rtl8192cu: Fix some code in RF handling

commit e9b0784bb9de3152e787ee779868c626b137fb3b upstream.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agortlwifi: rtl8192cu: Update the power index registers
Larry Finger [Mon, 18 Nov 2013 17:11:33 +0000 (11:11 -0600)]
rtlwifi: rtl8192cu: Update the power index registers

commit 9806eacf5de27ab01d680c5d75c92a3a89734e4f upstream.

This patch uses the newly introduced power index register routines.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agortlwifi: rtl8192c: Add routines to save/restore power index registers
Larry Finger [Mon, 18 Nov 2013 17:11:32 +0000 (11:11 -0600)]
rtlwifi: rtl8192c: Add routines to save/restore power index registers

commit 97204e93f01868eeba6ae5c4f3270f32905bb418 upstream.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agortlwifi: Increase the RX queue length for USB drivers
Larry Finger [Mon, 18 Nov 2013 17:11:30 +0000 (11:11 -0600)]
rtlwifi: Increase the RX queue length for USB drivers

commit dc6405712268fe514d3dd89aa936c4397b0871b9 upstream.

The current number of RX buffers queued is 32, which is too small under
heavy load. That number is doubled.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agortlwifi: rtl8192c: Add new definitions in the dm_common header
Larry Finger [Mon, 18 Nov 2013 17:11:29 +0000 (11:11 -0600)]
rtlwifi: rtl8192c: Add new definitions in the dm_common header

commit c908c74e005de780fddbe8cb6fcd44803f5d4b74 upstream.

Changes in the gain-control mechanism will require some changes in the header.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>