opensuse:kernel.git
5 years agoftrace: Move ftrace_filter_lseek out of CONFIG_DYNAMIC_FTRACE section
Steven Rostedt [Fri, 7 Jun 2013 09:01:04 +0000 (17:01 +0800)]
ftrace: Move ftrace_filter_lseek out of CONFIG_DYNAMIC_FTRACE section

commit 7f49ef69db6bbf756c0abca7e9b65b32e999eec8 upstream.

As ftrace_filter_lseek is now used with ftrace_pid_fops, it needs to
be moved out of the #ifdef CONFIG_DYNAMIC_FTRACE section as the
ftrace_pid_fops is defined when DYNAMIC_FTRACE is not.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Namhyung Kim <namhyung@kernel.org>
[ lizf: adjust context ]
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agotracing: Fix possible NULL pointer dereferences
Namhyung Kim [Fri, 7 Jun 2013 09:00:33 +0000 (17:00 +0800)]
tracing: Fix possible NULL pointer dereferences

commit 6a76f8c0ab19f215af2a3442870eeb5f0e81998d upstream.

Currently set_ftrace_pid and set_graph_function files use seq_lseek
for their fops.  However seq_open() is called only for FMODE_READ in
the fops->open() so that if an user tries to seek one of those file
when she open it for writing, it sees NULL seq_file and then panic.

It can be easily reproduced with following command:

  $ cd /sys/kernel/debug/tracing
  $ echo 1234 | sudo tee -a set_ftrace_pid

In this example, GNU coreutils' tee opens the file with fopen(, "a")
and then the fopen() internally calls lseek().

Link:
http://lkml.kernel.org/r/1365663302-2170-1-git-send-email-namhyung@kernel.org

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
[ lizf: adjust context ]
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoUSB: ftdi_sio: Quiet sparse noise about using plain integer was NULL pointer
Ying Xue [Mon, 6 Aug 2012 09:46:37 +0000 (17:46 +0800)]
USB: ftdi_sio: Quiet sparse noise about using plain integer was NULL pointer

commit a816e3113b63753c330ca4751ea1d208e93e3015 upstream.

Pointers should not be compared to plain integers.
Quiets the sparse warning:
warning: Using plain integer as NULL pointer

Signed-off-by: Ying Xue <ying.xue@windriver.com>
Cc: Lotfi Manseur <lotfi.manseur@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoUSB: serial: ftdi_sio: Handle the old_termios == 0 case e.g. uart_resume_port()
Andrew Worsley [Tue, 22 Nov 2011 09:00:19 +0000 (20:00 +1100)]
USB: serial: ftdi_sio: Handle the old_termios == 0 case e.g. uart_resume_port()

commit c515598e0f5769916c31c00392cc2bfe6af74e55 upstream.

  Handle null old_termios in ftdi_set_termios() calls from uart_resume_port().

Signed-off-by: Andrew Worsley <amworsley@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Lotfi Manseur <lotfi.manseur@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agodrm/i915/sdvo: Use &intel_sdvo->ddc instead of intel_sdvo->i2c for DDC.
Egbert Eich [Tue, 4 Jun 2013 15:13:21 +0000 (17:13 +0200)]
drm/i915/sdvo: Use &intel_sdvo->ddc instead of intel_sdvo->i2c for DDC.

commit 53d3b4d7778daf15900867336c85d3f8dd70600c upstream.

In intel_sdvo_get_lvds_modes() the wrong i2c adapter record is used
for DDC. Thus the code will always have to rely on a LVDS panel
mode supplied by VBT.
In most cases this succeeds, so this didn't get detected for quite
a while.

This regression seems to have been introduced in

commit f899fc64cda8569d0529452aafc0da31c042df2e
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Tue Jul 20 15:44:45 2010 -0700

    drm/i915: use GMBUS to manage i2c links

Signed-off-by: Egbert Eich <eich@suse.de>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Add note about which commit likely introduced this issue.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agodrm: fix a use-after-free when GPU acceleration disabled
Huacai Chen [Tue, 21 May 2013 06:23:43 +0000 (06:23 +0000)]
drm: fix a use-after-free when GPU acceleration disabled

commit b7ea85a4fed37835eec78a7be3039c8dc22b8178 upstream.

When GPU acceleration is disabled, drm_vblank_cleanup() will free the
vblank-related data, such as vblank_refcount, vblank_inmodeset, etc.
But we found that drm_vblank_post_modeset() may be called after the
cleanup, which use vblank_refcount and vblank_inmodeset. And this will
cause a kernel panic.

Fix this by return immediately if dev->num_crtcs is zero. This is the
same thing that drm_vblank_pre_modeset() does.

Call trace of a drm_vblank_post_modeset() after drm_vblank_cleanup():
[   62.628906] [<ffffffff804868d0>] drm_vblank_post_modeset+0x34/0xb4
[   62.628906] [<ffffffff804c7008>] atombios_crtc_dpms+0xb4/0x174
[   62.628906] [<ffffffff804c70e0>] atombios_crtc_commit+0x18/0x38
[   62.628906] [<ffffffff8047f038>] drm_crtc_helper_set_mode+0x304/0x3cc
[   62.628906] [<ffffffff8047f92c>] drm_crtc_helper_set_config+0x6d8/0x988
[   62.628906] [<ffffffff8047dd40>] drm_fb_helper_set_par+0x94/0x104
[   62.628906] [<ffffffff80439d14>] fbcon_init+0x424/0x57c
[   62.628906] [<ffffffff8046a638>] visual_init+0xb8/0x118
[   62.628906] [<ffffffff8046b9f8>] take_over_console+0x238/0x384
[   62.628906] [<ffffffff80436df8>] fbcon_takeover+0x7c/0xdc
[   62.628906] [<ffffffff8024fa20>] notifier_call_chain+0x44/0x94
[   62.628906] [<ffffffff8024fcbc>] __blocking_notifier_call_chain+0x48/0x68
[   62.628906] [<ffffffff8042d990>] register_framebuffer+0x228/0x260
[   62.628906] [<ffffffff8047e010>] drm_fb_helper_single_fb_probe+0x260/0x314
[   62.628906] [<ffffffff8047e2c4>] drm_fb_helper_initial_config+0x200/0x234
[   62.628906] [<ffffffff804e5560>] radeon_fbdev_init+0xd4/0xf4
[   62.628906] [<ffffffff804e0e08>] radeon_modeset_init+0x9bc/0xa18
[   62.628906] [<ffffffff804bfc14>] radeon_driver_load_kms+0xdc/0x12c
[   62.628906] [<ffffffff8048b548>] drm_get_pci_dev+0x148/0x238
[   62.628906] [<ffffffff80423564>] local_pci_probe+0x5c/0xd0
[   62.628906] [<ffffffff80241ac4>] work_for_cpu_fn+0x1c/0x30
[   62.628906] [<ffffffff802427c8>] process_one_work+0x274/0x3bc
[   62.628906] [<ffffffff80242934>] process_scheduled_works+0x24/0x44
[   62.628906] [<ffffffff8024515c>] worker_thread+0x31c/0x3f4
[   62.628906] [<ffffffff802497a8>] kthread+0x88/0x90
[   62.628906] [<ffffffff80206794>] kernel_thread_helper+0x10/0x18

Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Binbin Zhou <zhoubb@lemote.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Acked-by: Paul Menzel <paulepanter@users.sourceforge.net>
Signed-off-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agohwmon: (adm1021) Strengthen chip detection for ADM1021, LM84 and MAX1617
Guenter Roeck [Wed, 5 Jun 2013 21:09:30 +0000 (14:09 -0700)]
hwmon: (adm1021) Strengthen chip detection for ADM1021, LM84 and MAX1617

commit 591bfcfc334a003ba31c0deff03b22e73349939b upstream.

On a system with both MAX1617 and JC42 sensors, JC42 sensors can be misdetected
as LM84. Strengthen detection sufficiently enough to avoid this misdetection.
Also improve detection for ADM1021.

Modeled after chip detection code in sensors-detect command.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoACPI / video: ignore BIOS initial backlight value for HP Pavilion g6
Ash Willis [Wed, 29 May 2013 01:27:59 +0000 (01:27 +0000)]
ACPI / video: ignore BIOS initial backlight value for HP Pavilion g6

commit 780a6ec640a3fed671fc2c40e4dd30c03eca3ac3 upstream.

This patch addresses kernel bug 56661. BIOS reports an incorrect
backlight value, causing the driver to switch off the backlight
completely during startup. This patch ignores the incorrect value from
BIOS.

References: https://bugzilla.kernel.org/show_bug.cgi?id=56661
Signed-off-by: Ash Willis <ashwillis@programmer.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoACPI / video: ignore BIOS initial backlight value for HP m4
Alex Hung [Tue, 28 May 2013 02:05:09 +0000 (02:05 +0000)]
ACPI / video: ignore BIOS initial backlight value for HP m4

commit fedbe9bc6fd3e14b1ffbb3dac407777ac4a3650c upstream.

On HP m4 lapops, BIOS reports minimum backlight on boot and
causes backlight to dim completely. This ignores the initial backlight
values and set to max brightness.

References: https://bugs.launchpad.net/bugs/1184501
Signed-off-by: Alex Hung <alex.hung@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoUSB: mos7720: fix hardware flow control
Johan Hovold [Tue, 4 Jun 2013 16:50:31 +0000 (18:50 +0200)]
USB: mos7720: fix hardware flow control

commit a26f009a070e840fadacb91013b2391ba7ab6cc2 upstream.

The register access to enable hardware flow control depends on the
device port number and not the port minor number.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoUSB: mos7720: fix message timeouts
Johan Hovold [Mon, 27 May 2013 12:44:43 +0000 (14:44 +0200)]
USB: mos7720: fix message timeouts

commit 849513a7809175420d353625b6f651d961e99d49 upstream.

The control and bulk-message timeouts are specified in milliseconds and
should not depend on HZ.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoUSB: mos7720: fix DMA to stack
Johan Hovold [Mon, 27 May 2013 12:44:39 +0000 (14:44 +0200)]
USB: mos7720: fix DMA to stack

commit 72ea18a558ed7a63a50bb121ba60d73b5b38ae30 upstream.

The read_mos_reg function is called with stack-allocated buffers, which
must not be used for control messages.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoUSB: revert periodic scheduling bugfix
Alan Stern [Tue, 28 May 2013 18:03:10 +0000 (14:03 -0400)]
USB: revert periodic scheduling bugfix

commit fdc03438f53a00294ed9939eb3a1f6db6f3d8963 upstream.

This patch reverts commit 3e619d04159be54b3daa0b7036b0ce9e067f4b5d
(USB: EHCI: fix bug in scheduling periodic split transfers).  The
commit was valid -- it fixed a real bug -- but the periodic scheduler
in ehci-hcd is in such bad shape (especially the part that handles
split transactions) that fixing one bug is very likely to cause
another to surface.  That's what happened in this case; the result was
choppy and noisy playback on certain 24-bit audio devices.

The only real fix will be to rewrite this entire section of code.  My
next project...

This fixes https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1136110.

Thanks to Tim Richardson for extra testing and feedback, and to Joseph
Salisbury and Tyson Tan for tracking down the original source of the
problem.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Joseph Salisbury <joseph.salisbury@canonical.com>
CC: Tim Richardson <tim@tim-richardson.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoUSB: serial: fix Treo/Kyocera interrrupt-in urb context
Johan Hovold [Mon, 27 May 2013 12:44:37 +0000 (14:44 +0200)]
USB: serial: fix Treo/Kyocera interrrupt-in urb context

commit 5f8e2c07d75967ee49a5da1d21ddf5f50d48cda0 upstream.

The first and second interrupt-in urbs are swapped for some Treo/Kyocera
devices, but the urb context was never updated with the new port.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoUSB: whiteheat: fix broken port configuration
Johan Hovold [Thu, 6 Jun 2013 11:32:47 +0000 (13:32 +0200)]
USB: whiteheat: fix broken port configuration

commit 9eecf22d2b375b9064a20421c6c307b760b03d46 upstream.

When configuring the port (e.g. set_termios) the port minor number
rather than the port number was used in the request (and they only
coincide for minor number 0).

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoUSB: Serial: cypress_M8: Enable FRWD Dongle hidcom device
Robert Butora [Fri, 31 May 2013 15:09:51 +0000 (18:09 +0300)]
USB: Serial: cypress_M8: Enable FRWD Dongle hidcom device

commit 6529591e3eef65f0f528a81ac169f6e294b947a7 upstream.

The patch adds a new HIDCOM device and does not affect other devices
driven by the cypress_M8 module. Changes are:
- add VendorID ProductID to device tables
- skip unstable speed check because FRWD uses 115200bps
- skip reset at probe which is an issue workaround for this
particular device.

Signed-off-by: Robert Butora <robert.butora.fi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoUSB: ark3116: fix control-message timeout
Johan Hovold [Mon, 27 May 2013 12:44:41 +0000 (14:44 +0200)]
USB: ark3116: fix control-message timeout

commit 634371911730a462626071065b64cd6e1fe213e0 upstream.

The control-message timeout is specified in milliseconds and should not
depend on HZ.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoUSB: keyspan: fix bogus array index
Johan Hovold [Tue, 4 Jun 2013 16:50:29 +0000 (18:50 +0200)]
USB: keyspan: fix bogus array index

commit a07088098a650267b2eda689538133a324b9523f upstream.

The outcont_endpoints array was indexed using the port minor number
(which can be greater than the array size) rather than the device port
number.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoUSB: iuu_phoenix: fix bulk-message timeout
Johan Hovold [Mon, 27 May 2013 12:44:42 +0000 (14:44 +0200)]
USB: iuu_phoenix: fix bulk-message timeout

commit 6c13ff68a7ce01da7a51b44241a7aad8eaaedde7 upstream.

The bulk-message timeout is specified in milliseconds and should not
depend on HZ.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoALSA: usb-audio - Apply Logitech QuickCam Pro 9000 quirk only to audio iface
Takashi Iwai [Tue, 4 Jun 2013 14:02:54 +0000 (16:02 +0200)]
ALSA: usb-audio - Apply Logitech QuickCam Pro 9000 quirk only to audio iface

commit 8eafc0a161123d90617c9ca2eddfe87b382b1b89 upstream.

... instead of applying to all interfaces.

Reference: http://forums.gentoo.org/viewtopic-p-6886404.html

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoUSB: option: blacklist network interface on Huawei E1820
Bjørn Mork [Thu, 6 Jun 2013 10:57:24 +0000 (12:57 +0200)]
USB: option: blacklist network interface on Huawei E1820

commit b8a24e6281d37243c06b9497dcbfaa98c1e2ad35 upstream.

The mode used by Windows for the Huawei E1820 will use the
same ff/ff/ff class codes for both serial and network
functions.

Reported-by: Graham Inggs <graham.inggs@uct.ac.za>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoLinux 3.0.81
Greg Kroah-Hartman [Fri, 7 Jun 2013 19:46:53 +0000 (12:46 -0700)]
Linux 3.0.81

5 years agothinkpad-acpi: recognize latest V-Series using DMI_BIOS_VENDOR
Manoj Iyer [Mon, 6 Aug 2012 23:15:37 +0000 (18:15 -0500)]
thinkpad-acpi: recognize latest V-Series using DMI_BIOS_VENDOR

commit a4f46bb9fa84642e356898ee44b670989622f8bb upstream.

In the latest V-series bios DMI_PRODUCT_VERSION does not contain
the string Lenovo or Thinkpad, but is set to the model number, this
causes the thinkpad_acpi module to fail to load. Recognize laptop
as Lenovo using DMI_BIOS_VENDOR instead, which is set to Lenovo.

Test on V490u
=============
== After the patch ==

[ 1350.295757] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[ 1350.295760] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 1350.295761] thinkpad_acpi: ThinkPad BIOS H7ET21WW (1.00 ), EC unknown
[ 1350.295763] thinkpad_acpi: Lenovo LENOVO, model LV5DXXX
[ 1350.296086] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[ 1350.296694] thinkpad_acpi: radio switch found; radios are enabled
[ 1350.296703] thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode
[ 1350.306466] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 1350.307082] Registered led device: tpacpi::thinklight
[ 1350.307215] Registered led device: tpacpi::power
[ 1350.307255] Registered led device: tpacpi::standby
[ 1350.307294] Registered led device: tpacpi::thinkvantage
[ 1350.308160] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 1350.308333] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 1350.312287] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input14

== Before the patch ==
sudo modprobe thinkpad_acpi
FATAL: Error inserting thinkpad_acpi (/lib/modules/3.2.0-27-generic/kernel/drivers/platform/x86/thinkpad_acpi.ko): No such device

Test on B485
=============
This patch was also test in a B485 where the thinkpad_acpi module does not
have any issues loading. But, I tested it to make sure this patch does not
break on already functioning models of Lenovo products.

[13486.746359] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[13486.746364] thinkpad_acpi: http://ibm-acpi.sf.net/
[13486.746368] thinkpad_acpi: ThinkPad BIOS HJET15WW(1.01), EC unknown
[13486.746373] thinkpad_acpi: Lenovo Lenovo LB485, model 814TR01
[13486.747300] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[13486.752435] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[13486.752883] Registered led device: tpacpi::thinklight
[13486.752915] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[13486.753216] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[13486.757147] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input15

Signed-off-by: Manoj Iyer <manoj.iyer@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Cc: Shuduo Sang <shuduo.sang@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agomac80211: close AP_VLAN interfaces before unregistering all
Johannes Berg [Thu, 23 May 2013 23:06:09 +0000 (01:06 +0200)]
mac80211: close AP_VLAN interfaces before unregistering all

commit c8aa22db0112f640ac6631347f850879c621840b upstream.

Since Eric's commit efe117ab8 ("Speedup ieee80211_remove_interfaces")
there's a bug in mac80211 when it unregisters with AP_VLAN interfaces
up. If the AP_VLAN interface was registered after the AP it belongs
to (which is the typical case) and then we get into this code path,
unregister_netdevice_many() will crash because it isn't prepared to
deal with interfaces being closed in the middle of it. Exactly this
happens though, because we iterate the list, find the AP master this
AP_VLAN belongs to and dev_close() the dependent VLANs. After this,
unregister_netdevice_many() won't pick up the fact that the AP_VLAN
is already down and will do it again, causing a crash.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoALSA: usb-audio: avoid integer overflow in create_fixed_stream_quirk()
Xi Wang [Tue, 14 Feb 2012 10:18:48 +0000 (05:18 -0500)]
ALSA: usb-audio: avoid integer overflow in create_fixed_stream_quirk()

commit 8866f405efd4171f9d9c91901d2dd02f01bacb60 upstream.

A malicious USB device could feed in a large nr_rates value.  This would
cause the subsequent call to kmemdup() to allocate a smaller buffer than
expected, leading to out-of-bounds access.

This patch validates the nr_rates value and reuses the limit introduced
in commit 4fa0e81b ("ALSA: usb-audio: fix possible hang and overflow
in parse_uac2_sample_rate_range()").

Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoALSA: usb-audio: fix possible hang and overflow in parse_uac2_sample_rate_range()
Xi Wang [Sun, 8 Jan 2012 14:02:52 +0000 (09:02 -0500)]
ALSA: usb-audio: fix possible hang and overflow in parse_uac2_sample_rate_range()

commit 4fa0e81b83503900be277e6273a79651b375e288 upstream.

A malicious USB device may feed in carefully crafted min/max/res values,
so that the inner loop in parse_uac2_sample_rate_range() could run for
a long time or even never terminate, e.g., given max = INT_MAX.

Also nr_rates could be a large integer, which causes an integer overflow
in the subsequent call to kmalloc() in parse_audio_format_rates_v2().
Thus, kmalloc() would allocate a smaller buffer than expected, leading
to a memory corruption.

To exploit the two vulnerabilities, an attacker needs physical access
to the machine to plug in a malicious USB device.

This patch makes two changes.

1) The type of "rate" is changed to unsigned int, so that the loop could
   stop once "rate" is larger than INT_MAX.

2) Limit nr_rates to 1024.

Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agojfs: fix a couple races
Dave Kleikamp [Wed, 1 May 2013 16:08:38 +0000 (11:08 -0500)]
jfs: fix a couple races

commit 73aaa22d5ffb2630456bac2f9a4ed9b81d0d7271 upstream.

This patch fixes races uncovered by xfstests testcase 068.

One race is the result of jfs_sync() trying to write a sync point to the
journal after it has been frozen (or possibly in the process). Since
freezing sync's the journal, there is no need to write a sync point so
we simply want to return.

The second involves jfs_write_inode() being called on a deleted inode.
It calls jfs_flush_journal which is held up by the jfs_commit thread
doing the final iput on the same deleted inode, which itself is
waiting for the I_SYNC flag to be cleared. jfs_write_inode need not
do anything when i_nlink is zero, which is the easy fix.

Reported-by: Michael L. Semon <mlsemon35@gmail.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoxen/events: Handle VIRQ_TIMER before any other hardirq in event loop.
Keir Fraser [Thu, 28 Mar 2013 14:03:36 +0000 (10:03 -0400)]
xen/events: Handle VIRQ_TIMER before any other hardirq in event loop.

commit bee980d9e9642e96351fa3ca9077b853ecf62f57 upstream.

This avoids any other hardirq handler seeing a very stale jiffies
value immediately after wakeup from a long idle period. The one
observable symptom of this was a USB keyboard, with software keyboard
repeat, which would always repeat a key immediately that it was
pressed. This is due to the key press waking the guest, the key
handler immediately runs, sees an old jiffies value, and then that
jiffies value significantly updated, before the key is unpressed.

Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agolibata: make ata_exec_internal_sg honor DMADIR
Vincent Pelletier [Sat, 18 May 2013 16:44:04 +0000 (18:44 +0200)]
libata: make ata_exec_internal_sg honor DMADIR

commit e771451c0a831d96a7c14b0ca8a8ec671d98567b upstream.

libata honors DMADIR for regular commands, but not for internal commands
used (among other) during device initialisation.

This makes SATA-host-to-PATA-device bridges based on Silicon Image SiL3611
(such as "Abit Serillel 2") end up disabled when used with an ATAPI device
after a few tries.

Log output of the bridge being hot-plugged with an ATAPI drive:

  [ 9631.212901] ata1: exception Emask 0x10 SAct 0x0 SErr 0x40c0000 action 0xe frozen
  [ 9631.212913] ata1: irq_stat 0x00000040, connection status changed
  [ 9631.212923] ata1: SError: { CommWake 10B8B DevExch }
  [ 9631.212939] ata1: hard resetting link
  [ 9632.104962] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  [ 9632.106393] ata1.00: ATAPI: PIONEER DVD-RW  DVR-115, 1.06, max UDMA/33
  [ 9632.106407] ata1.00: applying bridge limits
  [ 9632.108151] ata1.00: configured for UDMA/33
  [ 9637.105303] ata1.00: qc timeout (cmd 0xa0)
  [ 9637.105324] ata1.00: failed to clear UNIT ATTENTION (err_mask=0x5)
  [ 9637.105335] ata1: hard resetting link
  [ 9638.044599] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  [ 9638.047878] ata1.00: configured for UDMA/33
  [ 9643.044933] ata1.00: qc timeout (cmd 0xa0)
  [ 9643.044953] ata1.00: failed to clear UNIT ATTENTION (err_mask=0x5)
  [ 9643.044963] ata1: limiting SATA link speed to 1.5 Gbps
  [ 9643.044971] ata1.00: limiting speed to UDMA/33:PIO3
  [ 9643.044979] ata1: hard resetting link
  [ 9643.984225] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
  [ 9643.987471] ata1.00: configured for UDMA/33
  [ 9648.984591] ata1.00: qc timeout (cmd 0xa0)
  [ 9648.984612] ata1.00: failed to clear UNIT ATTENTION (err_mask=0x5)
  [ 9648.984619] ata1.00: disabled
  [ 9649.000593] ata1: hard resetting link
  [ 9649.939902] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
  [ 9649.955864] ata1: EH complete

With this patch, the drive enumerates correctly when libata is loaded with
atapi_dmadir=1:

  [ 9891.810863] ata1: exception Emask 0x10 SAct 0x0 SErr 0x40c0000 action 0xe frozen
  [ 9891.810874] ata1: irq_stat 0x00000040, connection status changed
  [ 9891.810884] ata1: SError: { CommWake 10B8B DevExch }
  [ 9891.810900] ata1: hard resetting link
  [ 9892.762105] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  [ 9892.763544] ata1.00: ATAPI: PIONEER DVD-RW  DVR-115, 1.06, max UDMA/33, DMADIR
  [ 9892.763558] ata1.00: applying bridge limits
  [ 9892.765393] ata1.00: configured for UDMA/33
  [ 9892.786063] ata1: EH complete
  [ 9892.792062] scsi 0:0:0:0: CD-ROM            PIONEER  DVD-RW  DVR-115  1.06 PQ: 0 ANSI: 5
  [ 9892.798455] sr2: scsi3-mmc drive: 12x/12x writer dvd-ram cd/rw xa/form2 cdda tray
  [ 9892.798837] sr 0:0:0:0: Attached scsi CD-ROM sr2
  [ 9892.799109] sr 0:0:0:0: Attached scsi generic sg6 type 5

Based on a patch by Csaba Halász <csaba.halasz@gmail.com> on linux-ide:
http://marc.info/?l=linux-ide&m=136121147832295&w=2

tj: minor formatting changes.

Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoUSB: io_ti: Fix NULL dereference in chase_port()
Wolfgang Frisch [Thu, 17 Jan 2013 00:07:02 +0000 (01:07 +0100)]
USB: io_ti: Fix NULL dereference in chase_port()

commit 1ee0a224bc9aad1de496c795f96bc6ba2c394811 upstream.

The tty is NULL when the port is hanging up.
chase_port() needs to check for this.

This patch is intended for stable series.
The behavior was observed and tested in Linux 3.2 and 3.7.1.

Johan Hovold submitted a more elaborate patch for the mainline kernel.

[   56.277883] usb 1-1: edge_bulk_in_callback - nonzero read bulk status received: -84
[   56.278811] usb 1-1: USB disconnect, device number 3
[   56.278856] usb 1-1: edge_bulk_in_callback - stopping read!
[   56.279562] BUG: unable to handle kernel NULL pointer dereference at 00000000000001c8
[   56.280536] IP: [<ffffffff8144e62a>] _raw_spin_lock_irqsave+0x19/0x35
[   56.281212] PGD 1dc1b067 PUD 1e0f7067 PMD 0
[   56.282085] Oops: 0002 [#1] SMP
[   56.282744] Modules linked in:
[   56.283512] CPU 1
[   56.283512] Pid: 25, comm: khubd Not tainted 3.7.1 #1 innotek GmbH VirtualBox/VirtualBox
[   56.283512] RIP: 0010:[<ffffffff8144e62a>]  [<ffffffff8144e62a>] _raw_spin_lock_irqsave+0x19/0x35
[   56.283512] RSP: 0018:ffff88001fa99ab0  EFLAGS: 00010046
[   56.283512] RAX: 0000000000000046 RBX: 00000000000001c8 RCX: 0000000000640064
[   56.283512] RDX: 0000000000010000 RSI: ffff88001fa99b20 RDI: 00000000000001c8
[   56.283512] RBP: ffff88001fa99b20 R08: 0000000000000000 R09: 0000000000000000
[   56.283512] R10: 0000000000000000 R11: ffffffff812fcb4c R12: ffff88001ddf53c0
[   56.283512] R13: 0000000000000000 R14: 00000000000001c8 R15: ffff88001e19b9f4
[   56.283512] FS:  0000000000000000(0000) GS:ffff88001fd00000(0000) knlGS:0000000000000000
[   56.283512] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[   56.283512] CR2: 00000000000001c8 CR3: 000000001dc51000 CR4: 00000000000006e0
[   56.283512] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   56.283512] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[   56.283512] Process khubd (pid: 25, threadinfo ffff88001fa98000, task ffff88001fa94f80)
[   56.283512] Stack:
[   56.283512]  0000000000000046 00000000000001c8 ffffffff810578ec ffffffff812fcb4c
[   56.283512]  ffff88001e19b980 0000000000002710 ffffffff812ffe81 0000000000000001
[   56.283512]  ffff88001fa94f80 0000000000000202 ffffffff00000001 0000000000000296
[   56.283512] Call Trace:
[   56.283512]  [<ffffffff810578ec>] ? add_wait_queue+0x12/0x3c
[   56.283512]  [<ffffffff812fcb4c>] ? usb_serial_port_work+0x28/0x28
[   56.283512]  [<ffffffff812ffe81>] ? chase_port+0x84/0x2d6
[   56.283512]  [<ffffffff81063f27>] ? try_to_wake_up+0x199/0x199
[   56.283512]  [<ffffffff81263a5c>] ? tty_ldisc_hangup+0x222/0x298
[   56.283512]  [<ffffffff81300171>] ? edge_close+0x64/0x129
[   56.283512]  [<ffffffff810612f7>] ? __wake_up+0x35/0x46
[   56.283512]  [<ffffffff8106135b>] ? should_resched+0x5/0x23
[   56.283512]  [<ffffffff81264916>] ? tty_port_shutdown+0x39/0x44
[   56.283512]  [<ffffffff812fcb4c>] ? usb_serial_port_work+0x28/0x28
[   56.283512]  [<ffffffff8125d38c>] ? __tty_hangup+0x307/0x351
[   56.283512]  [<ffffffff812e6ddc>] ? usb_hcd_flush_endpoint+0xde/0xed
[   56.283512]  [<ffffffff8144e625>] ? _raw_spin_lock_irqsave+0x14/0x35
[   56.283512]  [<ffffffff812fd361>] ? usb_serial_disconnect+0x57/0xc2
[   56.283512]  [<ffffffff812ea99b>] ? usb_unbind_interface+0x5c/0x131
[   56.283512]  [<ffffffff8128d738>] ? __device_release_driver+0x7f/0xd5
[   56.283512]  [<ffffffff8128d9cd>] ? device_release_driver+0x1a/0x25
[   56.283512]  [<ffffffff8128d393>] ? bus_remove_device+0xd2/0xe7
[   56.283512]  [<ffffffff8128b7a3>] ? device_del+0x119/0x167
[   56.283512]  [<ffffffff812e8d9d>] ? usb_disable_device+0x6a/0x180
[   56.283512]  [<ffffffff812e2ae0>] ? usb_disconnect+0x81/0xe6
[   56.283512]  [<ffffffff812e4435>] ? hub_thread+0x577/0xe82
[   56.283512]  [<ffffffff8144daa7>] ? __schedule+0x490/0x4be
[   56.283512]  [<ffffffff8105798f>] ? abort_exclusive_wait+0x79/0x79
[   56.283512]  [<ffffffff812e3ebe>] ? usb_remote_wakeup+0x2f/0x2f
[   56.283512]  [<ffffffff812e3ebe>] ? usb_remote_wakeup+0x2f/0x2f
[   56.283512]  [<ffffffff810570b4>] ? kthread+0x81/0x89
[   56.283512]  [<ffffffff81057033>] ? __kthread_parkme+0x5c/0x5c
[   56.283512]  [<ffffffff8145387c>] ? ret_from_fork+0x7c/0xb0
[   56.283512]  [<ffffffff81057033>] ? __kthread_parkme+0x5c/0x5c
[   56.283512] Code: 8b 7c 24 08 e8 17 0b c3 ff 48 8b 04 24 48 83 c4 10 c3 53 48 89 fb 41 50 e8 e0 0a c3 ff 48 89 04 24 e8 e7 0a c3 ff ba 00 00 01 00
<f0> 0f c1 13 48 8b 04 24 89 d1 c1 ea 10 66 39 d1 74 07 f3 90 66
[   56.283512] RIP  [<ffffffff8144e62a>] _raw_spin_lock_irqsave+0x19/0x35
[   56.283512]  RSP <ffff88001fa99ab0>
[   56.283512] CR2: 00000000000001c8
[   56.283512] ---[ end trace 49714df27e1679ce ]---

Signed-off-by: Wolfgang Frisch <wfpub@roembden.net>
Cc: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agocifs: fix potential buffer overrun when composing a new options string
Jeff Layton [Fri, 24 May 2013 11:40:04 +0000 (07:40 -0400)]
cifs: fix potential buffer overrun when composing a new options string

commit 166faf21bd14bc5c5295a44874bf7f3930c30b20 upstream.

Consider the case where we have a very short ip= string in the original
mount options, and when we chase a referral we end up with a very long
IPv6 address. Be sure to allow for that possibility when estimating the
size of the string to allocate.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agodrm/radeon: fix card_posted check for newer asics
Alex Deucher [Wed, 22 May 2013 15:22:51 +0000 (11:22 -0400)]
drm/radeon: fix card_posted check for newer asics

commit 09fb8bd1a63b0f9f15e655c4fe8d047e5d2bf67a upstream.

Newer asics have variable numbers of crtcs.  Use that
rather than the asic family to determine which crtcs
to check.  This avoids checking non-existent crtcs or
missing crtcs on certain asics.

Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoum: Serve io_remap_pfn_range()
Richard Weinberger [Tue, 7 Feb 2012 00:22:47 +0000 (01:22 +0100)]
um: Serve io_remap_pfn_range()

commit 4d94d6d030adfdea4837694d293ec6918d133ab2 upstream.

At some places io_remap_pfn_range() is needed.
UML has to serve it like all other archs do.

Signed-off-by: Richard Weinberger <richard@nod.at>
Tested-by: Antoine Martin <antoine@nagafix.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agomm/THP: use pmd_populate() to update the pmd with pgtable_t pointer
Aneesh Kumar K.V [Fri, 24 May 2013 22:55:21 +0000 (15:55 -0700)]
mm/THP: use pmd_populate() to update the pmd with pgtable_t pointer

commit 7c3425123ddfdc5f48e7913ff59d908789712b18 upstream.

We should not use set_pmd_at to update pmd_t with pgtable_t pointer.
set_pmd_at is used to set pmd with huge pte entries and architectures
like ppc64, clear few flags from the pte when saving a new entry.
Without this change we observe bad pte errors like below on ppc64 with
THP enabled.

  BUG: Bad page map in process ld mm=0xc000001ee39f4780 pte:7fc3f37848000001 pmd:c000001ec0000000

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agodrivers/block/brd.c: fix brd_lookup_page() race
Brian Behlendorf [Fri, 24 May 2013 22:55:28 +0000 (15:55 -0700)]
drivers/block/brd.c: fix brd_lookup_page() race

commit dfd20b2b174d3a9b258ea3b7a35ead33576587b1 upstream.

The index on the page must be set before it is inserted in the radix
tree.  Otherwise there is a small race which can occur during lookup
where the page can be found with the incorrect index.  This will trigger
the BUG_ON() in brd_lookup_page().

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reported-by: Chris Wedgwood <cw@f00f.org>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agomm: mmu_notifier: re-fix freed page still mapped in secondary MMU
Xiao Guangrong [Fri, 24 May 2013 22:55:11 +0000 (15:55 -0700)]
mm: mmu_notifier: re-fix freed page still mapped in secondary MMU

commit d34883d4e35c0a994e91dd847a82b4c9e0c31d83 upstream.

Commit 751efd8610d3 ("mmu_notifier_unregister NULL Pointer deref and
multiple ->release()") breaks the fix 3ad3d901bbcf ("mm: mmu_notifier:
fix freed page still mapped in secondary MMU").

Since hlist_for_each_entry_rcu() is changed now, we can not revert that
patch directly, so this patch reverts the commit and simply fix the bug
spotted by that patch

This bug spotted by commit 751efd8610d3 is:

    There is a race condition between mmu_notifier_unregister() and
    __mmu_notifier_release().

    Assume two tasks, one calling mmu_notifier_unregister() as a result
    of a filp_close() ->flush() callout (task A), and the other calling
    mmu_notifier_release() from an mmput() (task B).

                        A                               B
    t1                                            srcu_read_lock()
    t2            if (!hlist_unhashed())
    t3                                            srcu_read_unlock()
    t4            srcu_read_lock()
    t5                                            hlist_del_init_rcu()
    t6                                            synchronize_srcu()
    t7            srcu_read_unlock()
    t8            hlist_del_rcu()  <--- NULL pointer deref.

This can be fixed by using hlist_del_init_rcu instead of hlist_del_rcu.

The another issue spotted in the commit is "multiple ->release()
callouts", we needn't care it too much because it is really rare (e.g,
can not happen on kvm since mmu-notify is unregistered after
exit_mmap()) and the later call of multiple ->release should be fast
since all the pages have already been released by the first call.
Anyway, this issue should be fixed in a separate patch.

-stable suggestions: Any version that has commit 751efd8610d3 need to be
backported.  I find the oldest version has this commit is 3.0-stable.

[akpm@linux-foundation.org: tweak comments]
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Tested-by: Robin Holt <holt@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agonilfs2: fix issue of nilfs_set_page_dirty() for page at EOF boundary
Ryusuke Konishi [Fri, 24 May 2013 22:55:29 +0000 (15:55 -0700)]
nilfs2: fix issue of nilfs_set_page_dirty() for page at EOF boundary

commit 136e8770cd5d1fe38b3c613100dd6dc4db6d4fa6 upstream.

nilfs2: fix issue of nilfs_set_page_dirty for page at EOF boundary

DESCRIPTION:
 There are use-cases when NILFS2 file system (formatted with block size
lesser than 4 KB) can be remounted in RO mode because of encountering of
"broken bmap" issue.

The issue was reported by Anthony Doggett <Anthony2486@interfaces.org.uk>:
 "The machine I've been trialling nilfs on is running Debian Testing,
  Linux version 3.2.0-4-686-pae (debian-kernel@lists.debian.org) (gcc
  version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.35-2), but I've
  also reproduced it (identically) with Debian Unstable amd64 and Debian
  Experimental (using the 3.8-trunk kernel).  The problematic partitions
  were formatted with "mkfs.nilfs2 -b 1024 -B 8192"."

SYMPTOMS:
(1) System log contains error messages likewise:

    [63102.496756] nilfs_direct_assign: invalid pointer: 0
    [63102.496786] NILFS error (device dm-17): nilfs_bmap_assign: broken bmap (inode number=28)
    [63102.496798]
    [63102.524403] Remounting filesystem read-only

(2) The NILFS2 file system is remounted in RO mode.

REPRODUSING PATH:
(1) Create volume group with name "unencrypted" by means of vgcreate utility.
(2) Run script (prepared by Anthony Doggett <Anthony2486@interfaces.org.uk>):

----------------[BEGIN SCRIPT]--------------------

VG=unencrypted
lvcreate --size 2G --name ntest $VG
mkfs.nilfs2 -b 1024 -B 8192 /dev/mapper/$VG-ntest
mkdir /var/tmp/n
mkdir /var/tmp/n/ntest
mount /dev/mapper/$VG-ntest /var/tmp/n/ntest
mkdir /var/tmp/n/ntest/thedir
cd /var/tmp/n/ntest/thedir
sleep 2
date
darcs init
sleep 2
dmesg|tail -n 5
date
darcs whatsnew || true
date
sleep 2
dmesg|tail -n 5
----------------[END SCRIPT]--------------------

REPRODUCIBILITY: 100%

INVESTIGATION:
As it was discovered, the issue takes place during segment
construction after executing such sequence of user-space operations:

  open("_darcs/index", O_RDWR|O_CREAT|O_NOCTTY, 0666) = 7
  fstat(7, {st_mode=S_IFREG|0644, st_size=0, ...}) = 0
  ftruncate(7, 60)

The error message "NILFS error (device dm-17): nilfs_bmap_assign: broken
bmap (inode number=28)" takes place because of trying to get block
number for third block of the file with logical offset #3072 bytes.  As
it is possible to see from above output, the file has 60 bytes of the
whole size.  So, it is enough one block (1 KB in size) allocation for
the whole file.  Trying to operate with several blocks instead of one
takes place because of discovering several dirty buffers for this file
in nilfs_segctor_scan_file() method.

The root cause of this issue is in nilfs_set_page_dirty function which
is called just before writing to an mmapped page.

When nilfs_page_mkwrite function handles a page at EOF boundary, it
fills hole blocks only inside EOF through __block_page_mkwrite().

The __block_page_mkwrite() function calls set_page_dirty() after filling
hole blocks, thus nilfs_set_page_dirty function (=
a_ops->set_page_dirty) is called.  However, the current implementation
of nilfs_set_page_dirty() wrongly marks all buffers dirty even for page
at EOF boundary.

As a result, buffers outside EOF are inconsistently marked dirty and
queued for write even though they are not mapped with nilfs_get_block
function.

FIX:
This modifies nilfs_set_page_dirty() not to mark hole blocks dirty.

Thanks to Vyacheslav Dubeyko for his effort on analysis and proposals
for this issue.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Reported-by: Anthony Doggett <Anthony2486@interfaces.org.uk>
Reported-by: Vyacheslav Dubeyko <slava@dubeyko.com>
Cc: Vyacheslav Dubeyko <slava@dubeyko.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agowait: fix false timeouts when using wait_event_timeout()
Imre Deak [Fri, 24 May 2013 22:55:09 +0000 (15:55 -0700)]
wait: fix false timeouts when using wait_event_timeout()

commit 4c663cfc523a88d97a8309b04a089c27dc57fd7e upstream.

Many callers of the wait_event_timeout() and
wait_event_interruptible_timeout() expect that the return value will be
positive if the specified condition becomes true before the timeout
elapses.  However, at the moment this isn't guaranteed.  If the wake-up
handler is delayed enough, the time remaining until timeout will be
calculated as 0 - and passed back as a return value - even if the
condition became true before the timeout has passed.

Fix this by returning at least 1 if the condition becomes true.  This
semantic is in line with what wait_for_condition_timeout() does; see
commit bb10ed09 ("sched: fix wait_for_completion_timeout() spurious
failure under heavy load").

Daniel said "We have 3 instances of this bug in drm/i915.  One case even
where we switch between the interruptible and not interruptible
wait_event_timeout variants, foolishly presuming they have the same
semantics.  I very much like this."

One such bug is reported at
  https://bugs.freedesktop.org/show_bug.cgi?id=64133

Signed-off-by: Imre Deak <imre.deak@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: David Howells <dhowells@redhat.com>
Acked-by: Jens Axboe <axboe@kernel.dk>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Dave Jones <davej@redhat.com>
Cc: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoklist: del waiter from klist_remove_waiters before wakeup waitting process
wang, biao [Thu, 16 May 2013 01:50:13 +0000 (09:50 +0800)]
klist: del waiter from klist_remove_waiters before wakeup waitting process

commit ac5a2962b02f57dea76d314ef2521a2170b28ab6 upstream.

There is a race between klist_remove and klist_release. klist_remove
uses a local var waiter saved on stack. When klist_release calls
wake_up_process(waiter->process) to wake up the waiter, waiter might run
immediately and reuse the stack. Then, klist_release calls
list_del(&waiter->list) to change previous
wait data and cause prior waiter thread corrupt.

The patch fixes it against kernel 3.9.

Signed-off-by: wang, biao <biao.wang@intel.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agomm compaction: fix of improper cache flush in migration code
Leonid Yegoshin [Fri, 24 May 2013 22:55:18 +0000 (15:55 -0700)]
mm compaction: fix of improper cache flush in migration code

commit c2cc499c5bcf9040a738f49e8051b42078205748 upstream.

Page 'new' during MIGRATION can't be flushed with flush_cache_page().
Using flush_cache_page(vma, addr, pfn) is justified only if the page is
already placed in process page table, and that is done right after
flush_cache_page().  But without it the arch function has no knowledge
of process PTE and does nothing.

Besides that, flush_cache_page() flushes an application cache page, but
the kernel has a different page virtual address and dirtied it.

Replace it with flush_dcache_page(new) which is the proper usage.

The old page is flushed in try_to_unmap_one() before migration.

This bug takes place in Sead3 board with M14Kc MIPS CPU without cache
aliasing (but Harvard arch - separate I and D cache) in tight memory
environment (128MB) each 1-3days on SOAK test.  It fails in cc1 during
kernel build (SIGILL, SIGBUS, SIGSEG) if CONFIG_COMPACTION is switched
ON.

Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Cc: Leonid Yegoshin <yegoshin@mips.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Michal Hocko <mhocko@suse.cz>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoKirkwood: Enable PCIe port 1 on QNAP TS-11x/TS-21x
Martin Michlmayr [Sun, 21 Apr 2013 16:14:00 +0000 (17:14 +0100)]
Kirkwood: Enable PCIe port 1 on QNAP TS-11x/TS-21x

commit 99e11334dcb846f9b76fb808196c7f47aa83abb3 upstream.

Enable KW_PCIE1 on QNAP TS-11x/TS-21x devices as newer revisions
(rev 1.3) have a USB 3.0 chip from Etron on PCIe port 1.  Thanks
to Marek Vasut for identifying this issue!

Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Tested-by: Marek Vasut <marex@denx.de>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoocfs2: goto out_unlock if ocfs2_get_clusters_nocache() failed in ocfs2_fiemap()
Joseph Qi [Fri, 24 May 2013 22:55:34 +0000 (15:55 -0700)]
ocfs2: goto out_unlock if ocfs2_get_clusters_nocache() failed in ocfs2_fiemap()

commit b4ca2b4b577c3530e34dcfaafccb2cc680ce95d1 upstream.

Last time we found there is lock/unlock bug in ocfs2_file_aio_write, and
then we did a thorough search for all lock resources in
ocfs2_inode_info, including rw, inode and open lockres and found this
bug.  My kernel version is 3.0.13, and it is also in the lastest version
3.9.  In ocfs2_fiemap, once ocfs2_get_clusters_nocache failed, it should
goto out_unlock instead of out, because we need release buffer head, up
read alloc sem and unlock inode.

Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Reviewed-by: Jie Liu <jeff.liu@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Acked-by: Sunil Mushran <sunil.mushran@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agofat: fix possible overflow for fat_clusters
OGAWA Hirofumi [Fri, 24 May 2013 22:55:08 +0000 (15:55 -0700)]
fat: fix possible overflow for fat_clusters

commit 7b92d03c3239f43e5b86c9cc9630f026d36ee995 upstream.

Intermediate value of fat_clusters can be overflowed on 32bits arch.

Reported-by: Krzysztof Strasburger <strasbur@chkw386.ch.pwr.wroc.pl>
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agocifs: only set ops for inodes in I_NEW state
Jeff Layton [Tue, 7 May 2013 15:28:31 +0000 (11:28 -0400)]
cifs: only set ops for inodes in I_NEW state

commit c2b93e0699723700f886ce17bb65ffd771195a6d upstream.

It's generally not safe to reset the inode ops once they've been set. In
the case where the inode was originally thought to be a directory and
then later found to be a DFS referral, this can lead to an oops when we
try to trigger an inode op on it after changing the ops to the blank
referral operations.

Reported-and-Tested-by: Sachin Prabhu <sprabhu@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoUSB: UHCI: fix for suspend of virtual HP controller
Alan Stern [Tue, 14 May 2013 17:55:29 +0000 (13:55 -0400)]
USB: UHCI: fix for suspend of virtual HP controller

commit 997ff893603c6455da4c5e26ba1d0f81adfecdfc upstream.

HP's virtual UHCI host controller takes a long time to suspend
(several hundred microseconds), even when no devices are attached.
This provokes a warning message from uhci-hcd in the auto-stop case.

To prevent this from happening, this patch adds a test to avoid
performing an auto-stop when the wait_for_hp quirk flag is set.  The
controller will still suspend through the normal runtime PM mechanism.
And since that pathway includes a 1-ms delay, the slowness of the
virtual hardware won't matter.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: ZhenHua <zhen-hual@hp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoUSB: reset resume quirk needed by a hub
Oliver Neukum [Tue, 30 Apr 2013 08:18:04 +0000 (10:18 +0200)]
USB: reset resume quirk needed by a hub

commit bac6b03275184c912ad0818c9a0a736847804dca upstream.

Werner Fink has reported problems with this hub.

Signed-off-by: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoUSB: Blacklisted Cinterion's PLxx WWAN Interface
Schemmel Hans-Christoph [Mon, 6 May 2013 09:05:12 +0000 (11:05 +0200)]
USB: Blacklisted Cinterion's PLxx WWAN Interface

commit 8ff10bdb14a52e3f25d4ce09e0582a8684c1a6db upstream.

/drivers/usb/serial/option.c: Blacklisted Cinterion's PLxx WWAN
Interface (USB Interface 4), because it will be handled by QMI WWAN
driver. Product IDs renamed.

Signed-off-by: Hans-Christoph Schemmel <hans-christoph.schemmel@gemalto.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoTTY: Fix tty miss restart after we turn off flow-control
Wang YanQing [Thu, 9 May 2013 06:16:47 +0000 (14:16 +0800)]
TTY: Fix tty miss restart after we turn off flow-control

commit dab73b4eb9ef924a2b90dab84e539076d82b256f upstream.

I meet emacs hang in start if I do the operation below:
  1: echo 3 > /proc/sys/vm/drop_caches
  2: emacs BigFile
  3: Press CTRL-S follow 2 immediately

Then emacs hang on, CTRL-Q can't resume, the terminal
hang on, you can do nothing with this terminal except
close it.

The reason is before emacs takeover control the tty,
we use CTRL-S to XOFF it. Then when emacs takeover the
control, it may don't use the flow-control, so emacs hang.
This patch fix it.

This patch will fix a kind of strange tty relation hang problem,
I believe I meet it with vim in ssh, and also see below bug report:
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=465823

Signed-off-by: Wang YanQing <udknight@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoUSB: cxacru: potential underflow in cxacru_cm_get_array()
Dan Carpenter [Sun, 19 May 2013 18:52:20 +0000 (21:52 +0300)]
USB: cxacru: potential underflow in cxacru_cm_get_array()

commit 2a0ebf80aa95cc758d4725f74a7016e992606a39 upstream.

The value of "offd" comes off the instance->rcv_buf[] and we used it as
the offset into an array.  The problem is that we check the upper bound
but not for negative values.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoUSB: ftdi_sio: Add support for Newport CONEX motor drivers
Gomella, Andrew (NIH/NHLBI) [F] [Fri, 17 May 2013 17:39:46 +0000 (17:39 +0000)]
USB: ftdi_sio: Add support for Newport CONEX motor drivers

commit 7138143972b7c293267c783fc99a194f0ceff7f2 upstream.

Here are two more devices that use FTDI USB-to-serial chips with new product ID's.

The devices are the Newport Conex-AGP and Conex-CC motor controllers.
(http://www.newport.com/CONEX-AGP-Integrated-Piezo-Motor-Rotation-Stages-/987623/1033/info.aspx)
(http://www.newport.com/CONEX-CC-DC-Servo-Controller-Actuators/934114/1033/info.aspx)

usb-devices command yields:

P:  Vendor=104d ProdID=3002 Rev=06.00
S:  Manufacturer=Newport
S:  Product=CONEX-CC

as well as

P:  Vendor=104d ProdID=3006 Rev=06.00
S:  Manufacturer=Newport
S:  Product=CONEX-AGP

Signed-off-by: Andrew Gomella <andrew.gomella@nih.gov>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoUSB: option: add device IDs for Dell 5804 (Novatel E371) WWAN card
Dan Williams [Mon, 6 May 2013 21:16:44 +0000 (16:16 -0500)]
USB: option: add device IDs for Dell 5804 (Novatel E371) WWAN card

commit 49c6e370dd6400b84897c4100095089b5c13a061 upstream.

A rebranded Novatel E371 for AT&T's LTE bands.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agousb: option: Add Telewell TW-LTE 4G
Teppo Kotilainen [Fri, 3 May 2013 07:28:12 +0000 (10:28 +0300)]
usb: option: Add Telewell TW-LTE 4G

commit 73c042df6e1bc50544842a04b777b36bbe3630e6 upstream.

Information from driver description files:

  diag:  VID_19D2&PID_0412&MI_00
  nmea:  VID_19D2&PID_0412&MI_01
  at:    VID_19D2&PID_0412&MI_02
  modem: VID_19D2&PID_0412&MI_03
  net:   VID_19D2&PID_0412&MI_04

Signed-off-by: Teppo Kotilainen <qubit303@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agostaging: vt6656: use free_netdev instead of kfree
Hema Prathaban [Sat, 11 May 2013 17:09:47 +0000 (22:39 +0530)]
staging: vt6656: use free_netdev instead of kfree

commit 0a438d5b381e2bdfd5e02d653bf46fcc878356e3 upstream.

use free_netdev() instead of kfree(pDevice->apdev)

Signed-off-by: Hema Prathaban <hemaklnce@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoARM: plat-orion: Fix num_resources and id for ge10 and ge11
Gregory CLEMENT [Sun, 19 May 2013 20:12:43 +0000 (22:12 +0200)]
ARM: plat-orion: Fix num_resources and id for ge10 and ge11

commit 2b8b2797142c7951e635c6eec5d1705ee9bc45c5 upstream.

When platform data were moved from arch/arm/mach-mv78xx0/common.c to
arch/arm/plat-orion/common.c with the commit "7e3819d ARM: orion:
Consolidate ethernet platform data", there were few typo made on
gigabit Ethernet interface ge10 and ge11. This commit writes back
their initial value, which allows to use this interfaces again.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoavr32: fix relocation check for signed 18-bit offset
Hans-Christian Egtvedt [Mon, 13 May 2013 20:22:10 +0000 (22:22 +0200)]
avr32: fix relocation check for signed 18-bit offset

commit e68c636d88db3fda74e664ecb1a213ae0d50a7d8 upstream.

Caught by static code analysis by David.

Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoLinux 3.0.80
Greg Kroah-Hartman [Fri, 24 May 2013 18:09:48 +0000 (11:09 -0700)]
Linux 3.0.80

5 years agomedia: mantis: fix silly crash case
Alan Cox [Thu, 9 Aug 2012 15:33:52 +0000 (12:33 -0300)]
media: mantis: fix silly crash case

commit e1d45ae10aea8e8a403e5d96bf5902ee670007ff upstream.

If we set mantis->fe to NULL on an error its not a good idea to then try
passing NULL to the unregister paths and oopsing really.

Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=16473

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agohwmon: fix error return code in abituguru_probe()
Wei Yongjun [Mon, 13 May 2013 06:01:43 +0000 (14:01 +0800)]
hwmon: fix error return code in abituguru_probe()

commit ecacb0b17c08fae89f65468727f0e4b8e91da4e1 upstream.

Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agobtrfs: don't stop searching after encountering the wrong item
Gabriel de Perthuis [Mon, 6 May 2013 17:40:18 +0000 (17:40 +0000)]
btrfs: don't stop searching after encountering the wrong item

commit 03b71c6ca6286625d8f1ed44aabab9b5bf5dac10 upstream.

The search ioctl skips items that are too large for a result buffer, but
inline items of a certain size occuring before any search result is
found would trigger an overflow and stop the search entirely.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=57641

Signed-off-by: Gabriel de Perthuis <g2p.code+btrfs@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoLinux 3.0.79
Greg Kroah-Hartman [Sun, 19 May 2013 17:05:47 +0000 (10:05 -0700)]
Linux 3.0.79

5 years agousermodehelper: check subprocess_info->path != NULL
Oleg Nesterov [Thu, 16 May 2013 15:43:55 +0000 (17:43 +0200)]
usermodehelper: check subprocess_info->path != NULL

commit 264b83c07a84223f0efd0d1db9ccc66d6f88288f upstream.

argv_split(empty_or_all_spaces) happily succeeds, it simply returns
argc == 0 and argv[0] == NULL. Change call_usermodehelper_exec() to
check sub_info->path != NULL to avoid the crash.

This is the minimal fix, todo:

 - perhaps we should change argv_split() to return NULL or change the
   callers.

 - kill or justify ->path[0] check

 - narrow the scope of helper_lock()

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-By: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agodrm/radeon: check incoming cliprects pointer
Kees Cook [Mon, 13 May 2013 05:00:51 +0000 (22:00 -0700)]
drm/radeon: check incoming cliprects pointer

commit fefaedcfb82d2e57c2320acf60604ab03b750cc0 upstream.

The "boxes" parameter points into userspace memory. It should be verified
like any other operation against user memory.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoipmi: ipmi_devintf: compat_ioctl method fails to take ipmi_mutex
Benjamin LaHaise [Thu, 16 May 2013 19:04:27 +0000 (14:04 -0500)]
ipmi: ipmi_devintf: compat_ioctl method fails to take ipmi_mutex

commit 6368087e851e697679af059b4247aca33a69cef3 upstream.

When a 32 bit version of ipmitool is used on a 64 bit kernel, the
ipmi_devintf code fails to correctly acquire ipmi_mutex.  This results in
incomplete data being retrieved in some cases, or other possible failures.
Add a wrapper around compat_ipmi_ioctl() to take ipmi_mutex to fix this.

Signed-off-by: Benjamin LaHaise <bcrl@kvack.org>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agodrivers/char/ipmi: memcpy, need additional 2 bytes to avoid memory overflow
Chen Gang [Thu, 16 May 2013 19:04:25 +0000 (14:04 -0500)]
drivers/char/ipmi: memcpy, need additional 2 bytes to avoid memory overflow

commit a5f2b3d6a738e7d4180012fe7b541172f8c8dcea upstream.

When calling memcpy, read_data and write_data need additional 2 bytes.

  write_data:
    for checking:  "if (size > IPMI_MAX_MSG_LENGTH)"
    for operating: "memcpy(bt->write_data + 3, data + 1, size - 1)"

  read_data:
    for checking:  "if (msg_len < 3 || msg_len > IPMI_MAX_MSG_LENGTH)"
    for operating: "memcpy(data + 2, bt->read_data + 4, msg_len - 2)"

Signed-off-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoACPI / EC: Restart transaction even when the IBF flag set
Lan Tianyu [Mon, 6 May 2013 03:23:40 +0000 (03:23 +0000)]
ACPI / EC: Restart transaction even when the IBF flag set

commit 28fe5c825f8e15744d04c7c1b8df197950923ecd upstream.

The EC driver works abnormally with IBF flag always set.
IBF means "The host has written a byte of data to the command
or data port, but the embedded controller has not yet read it".
If IBF is set in the EC status and not cleared, this will cause
all subsequent EC requests to fail with a timeout error.

Change the EC driver so that it doesn't refuse to restart a
transaction if IBF is set in the status.  Also increase the
number of transaction restarts to 5, as it turns out that 2
is not sufficient in some cases.

This bug happens on several different machines (Asus V1S,
Dell Latitude E6530, Samsung R719, Acer Aspire 5930G,
Sony Vaio SR19VN and others).

[rjw: Changelog]
References: https://bugzilla.kernel.org/show_bug.cgi?id=14733
References: https://bugzilla.kernel.org/show_bug.cgi?id=15560
References: https://bugzilla.kernel.org/show_bug.cgi?id=15946
References: https://bugzilla.kernel.org/show_bug.cgi?id=42945
References: https://bugzilla.kernel.org/show_bug.cgi?id=48221
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agodrivers/rtc/rtc-pcf2123.c: fix error return code in pcf2123_probe()
Wei Yongjun [Mon, 29 Apr 2013 23:21:07 +0000 (16:21 -0700)]
drivers/rtc/rtc-pcf2123.c: fix error return code in pcf2123_probe()

commit 35623715818dfa720cccf99cd280dcbb4b78da23 upstream.

Fix to return -ENODEV in the chip not found error handling
case instead of 0, as done elsewhere in this function.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Cc: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jonghwan Choi <jhbird.choi@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agodrbd: fix for deadlock when using automatic split-brain-recovery
Philipp Reisner [Wed, 27 Mar 2013 13:08:47 +0000 (14:08 +0100)]
drbd: fix for deadlock when using automatic split-brain-recovery

commit 7c689e63a847316c1b2500f86891b0a574ce7e69 upstream.

With an automatic after split-brain recovery policy of
"after-sb-1pri call-pri-lost-after-sb",
when trying to drbd_set_role() to R_SECONDARY,
we run into a deadlock.

This was first recognized and supposedly fixed by
2009-06-10 "Fixed a deadlock when using automatic split brain recovery when both nodes are"
replacing drbd_set_role() with drbd_change_state() in that code-path,
but the first hunk of that patch forgets to remove the drbd_set_role().

We apparently only ever tested the "two primaries" case.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jonghwan Choi <jhbird.choi@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agor8169: fix vlan tag read ordering.
Francois Romieu [Thu, 9 May 2013 22:50:20 +0000 (00:50 +0200)]
r8169: fix vlan tag read ordering.

commit ce11ff5e5963e441feb591e76278528f876c332d upstream.

Control of receive descriptor must not be returned to ethernet chipset
before vlan tag processing is done.

VLAN tag receive word is now reset both in normal and error path.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Spotted-by: Timo Teras <timo.teras@iki.fi>
Cc: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agopch_dma: Use GFP_ATOMIC because called from interrupt context
Tomoya MORINAGA [Tue, 12 Feb 2013 02:25:33 +0000 (11:25 +0900)]
pch_dma: Use GFP_ATOMIC because called from interrupt context

commit 5c1ef59168c485318e40ba485c1eba57d81d0faa upstream.

pdc_desc_get() is called from pd_prep_slave_sg, and the function is
called from interrupt context(e.g. Uart driver "pch_uart.c").
In fact, I saw kernel error message.
So, GFP_ATOMIC must be used not GFP_NOIO.

Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoxfrm6: release dev before returning error
Cong Wang [Thu, 9 May 2013 22:40:00 +0000 (22:40 +0000)]
xfrm6: release dev before returning error

[ Upstream commit 84c4a9dfbf430861e7588d95ae3ff61535dca351 ]

We forget to call dev_put() on error path in xfrm6_fill_dst(),
its caller doesn't handle this.

Signed-off-by: Cong Wang <amwang@redhat.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoipv6: do not clear pinet6 field
Eric Dumazet [Thu, 9 May 2013 10:28:16 +0000 (10:28 +0000)]
ipv6: do not clear pinet6 field

[ Upstream commit f77d602124d865c38705df7fa25c03de9c284ad2 ]

We have seen multiple NULL dereferences in __inet6_lookup_established()

After analysis, I found that inet6_sk() could be NULL while the
check for sk_family == AF_INET6 was true.

Bug was added in linux-2.6.29 when RCU lookups were introduced in UDP
and TCP stacks.

Once an IPv6 socket, using SLAB_DESTROY_BY_RCU is inserted in a hash
table, we no longer can clear pinet6 field.

This patch extends logic used in commit fcbdf09d9652c891
("net: fix nulls list corruptions in sk_prot_alloc")

TCP/UDP/UDPLite IPv6 protocols provide their own .clear_sk() method
to make sure we do not clear pinet6 field.

At socket clone phase, we do not really care, as cloning the parent (non
NULL) pinet6 is not adding a fatal race.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agomacvlan: fix passthru mode race between dev removal and rx path
Jiri Pirko [Thu, 9 May 2013 04:23:40 +0000 (04:23 +0000)]
macvlan: fix passthru mode race between dev removal and rx path

[ Upstream commit 233c7df0821c4190e2d3f4be0f2ca0ab40a5ed8c, note
  that I had to add list_first_or_null_rcu to rculist.h in order
  to accomodate this fix. ]

Currently, if macvlan in passthru mode is created and data are rxed and
you remove this device, following panic happens:

NULL pointer dereference at 0000000000000198
IP: [<ffffffffa0196058>] macvlan_handle_frame+0x153/0x1f7 [macvlan]

I'm using following script to trigger this:
<script>
while [ 1 ]
do
ip link add link e1 name macvtap0 type macvtap mode passthru
ip link set e1 up
ip link set macvtap0 up
IFINDEX=`ip link |grep macvtap0 | cut -f 1 -d ':'`
cat /dev/tap$IFINDEX  >/dev/null &
ip link del dev macvtap0
done
</script>

I run this script while "ping -f" is running on another machine to send
packets to e1 rx.

Reason of the panic is that list_first_entry() is blindly called in
macvlan_handle_frame() even if the list was empty. vlan is set to
incorrect pointer which leads to the crash.

I'm fixing this by protecting port->vlans list by rcu and by preventing
from getting incorrect pointer in case the list is empty.

Introduced by: commit eb06acdc85585f2 "macvlan: Introduce 'passthru' mode to takeover the underlying device"

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoif_cablemodem.h: Add parenthesis around ioctl macros
Josh Boyer [Wed, 8 May 2013 09:45:47 +0000 (09:45 +0000)]
if_cablemodem.h: Add parenthesis around ioctl macros

[ Upstream commit 4f924b2aa4d3cb30f07e57d6b608838edcbc0d88 ]

Protect the SIOCGCM* ioctl macros with parenthesis.

Reported-by: Paul Wouters <pwouters@redhat.com>
Signed-off-by: Josh Boyer <jwboyer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years ago3c59x: fix PCI resource management
Sergei Shtylyov [Thu, 9 May 2013 11:14:07 +0000 (11:14 +0000)]
3c59x: fix PCI resource management

[ Upstream commit 4b264a1676e70dc656ba53a8cac690f2d4b65f4e ]

The driver wrongly claimed I/O ports at an address returned by pci_iomap() --
even if it was passed an MMIO address.  Fix this by claiming/releasing all PCI
resources in the PCI driver's probe()/remove() methods instead and get rid of
'must_free_region' flag weirdness (why would Cardbus claim anything for us?).

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years ago3c59x: fix freeing nonexistent resource on driver unload
Sergei Shtylyov [Thu, 2 May 2013 11:10:22 +0000 (11:10 +0000)]
3c59x: fix freeing nonexistent resource on driver unload

[ Upstream commit c81400be716aa4c76f6ebf339ba94358dbbf6da6 ]

When unloading the driver that drives an EISA board, a message similar to the
following one is displayed:

Trying to free nonexistent resource <0000000000013000-000000000001301f>

Then an user is unable to reload the driver because the resource it requested in
the previous load hasn't been freed. This happens most probably due to a typo in
vortex_eisa_remove() which calls release_region() with 'dev->base_addr'  instead
of 'edev->base_addr'...

Reported-by: Matthew Whitehead <tedheadster@gmail.com>
Tested-by: Matthew Whitehead <tedheadster@gmail.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agobridge: fix race with topology change timer
stephen hemminger [Thu, 2 May 2013 14:23:28 +0000 (14:23 +0000)]
bridge: fix race with topology change timer

[ Upstream commit 83401eb4990ff6af55aeed8f49681558544192e6 ]

A bridge should only send topology change notice if it is not
the root bridge. It is possible for message age timer to elect itself
as a new root bridge, and still have a topology change timer running
but waiting for bridge lock on other CPU.

Solve the race by checking if we are root bridge before continuing.
This was the root cause of the cases where br_send_tcn_bpdu would OOPS.

Reported-by: JerryKang <jerry.kang@samsung.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agonet_sched: act_ipt forward compat with xtables
Jamal Hadi Salim [Sun, 28 Apr 2013 05:06:38 +0000 (05:06 +0000)]
net_sched: act_ipt forward compat with xtables

[ Upstream commit 0dcffd09641f3abb21ac5cabc61542ab289d1a3c ]

Deal with changes in newer xtables while maintaining backward
compatibility. Thanks to Jan Engelhardt for suggestions.

Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years ago3c509.c: call SET_NETDEV_DEV for all device types (ISA/ISAPnP/EISA)
Matthew Whitehead [Mon, 29 Apr 2013 21:46:53 +0000 (17:46 -0400)]
3c509.c: call SET_NETDEV_DEV for all device types (ISA/ISAPnP/EISA)

[ Upstream commit 3b54912f9cd167641b91d4a697bd742f70e534fe ]

The venerable 3c509 driver only sets its device parent in one case, the ISAPnP one.
It does this with the SET_NETDEV_DEV function. It should register with the device
hierarchy in two additional cases: standard (non-PnP) ISA and EISA.

- Currently they appear here:
/sys/devices/virtual/net/eth0 (standard ISA)
/sys/devices/virtual/net/eth1 (EISA)

- Rather, they should instead be here:
/sys/devices/isa/3c509.0/net/eth0 (standard ISA)
/sys/devices/pci0000:00/0000:00:07.0/00:04/net/eth1 (EISA)

Tested on ISA and EISA boards.

Signed-off-by: Matthew Whitehead <tedheadster@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agotcp: force a dst refcount when prequeue packet
Eric Dumazet [Thu, 25 Apr 2013 01:34:55 +0000 (18:34 -0700)]
tcp: force a dst refcount when prequeue packet

[ Upstream commit 093162553c33e9479283e107b4431378271c735d ]

Before escaping RCU protected section and adding packet into
prequeue, make sure the dst is refcounted.

Reported-by: Mike Galbraith <bitbucket@online.de>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agodrm/mm: fix dump table BUG
Daniel Vetter [Sat, 20 Apr 2013 10:08:11 +0000 (12:08 +0200)]
drm/mm: fix dump table BUG

commit 3a359f0b21ab218c1bf7a6a1b638b6fd143d0b99 upstream.

In

commit 9e8944ab564f2e3dde90a518cd32048c58918608
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Thu Nov 15 11:32:17 2012 +0000

    drm: Introduce an iterator over holes in the drm_mm range manager

helpers and iterators for hole handling have been introduced with some
debug BUG_ONs sprinkled over. Unfortunately this broke the mm dumper
which unconditionally tried to compute the size of the very first
hole.

While at it unify the code a bit with the hole dumping in the loop.

v2: Extract a hole dump helper.

Reported-by: Christopher Harvey <charvey@matrox.com>
Cc: Christopher Harvey <charvey@matrox.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agomwifiex: fix setting of multicast filter
Daniel Drake [Wed, 8 May 2013 19:37:19 +0000 (15:37 -0400)]
mwifiex: fix setting of multicast filter

commit ccd384b10420ac81ba3fb9b0a7d18272c7173552 upstream.

A small bug in this code was causing the ALLMULTI filter to be set
when in fact we were just wanting to program a selective multicast list
to the hardware.

Fix that bug and remove a redundant if condition in the code that
follows.

This fixes wakeup behaviour when multicast WOL is enabled. Previously,
all multicast packets would wake up the system. Now, only those that the
host intended to receive trigger wakeups.

Signed-off-by: Daniel Drake <dsd@laptop.org>
Acked-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agomwifiex: clear is_suspended flag when interrupt is received early
Bing Zhao [Tue, 7 May 2013 02:46:53 +0000 (19:46 -0700)]
mwifiex: clear is_suspended flag when interrupt is received early

commit 48795424acff7215d5eac0b52793a2c1eb3a6283 upstream.

When the XO-4 with 8787 wireless is woken up due to wake-on-WLAN
mwifiex is often flooded with "not allowed while suspended" messages
and the interface is unusable.

[  202.171609] int: sdio_ireg = 0x1
[  202.180700] info: mwifiex_process_hs_config: auto cancelling host
               sleep since there is interrupt from the firmware
[  202.201880] event: wakeup device...
[  202.211452] event: hs_deactivated
[  202.514638] info: --- Rx: Data packet ---
[  202.514753] data: 4294957544 BSS(0-0): Data <= kernel
[  202.514825] PREP_CMD: device in suspended state
[  202.514839] data: dequeuing the packet ec7248c0 ec4869c0
[  202.514886] mwifiex_write_data_sync: not allowed while suspended
[  202.514886] host_to_card, write iomem (1) failed: -1
[  202.514917] mwifiex_write_data_sync: not allowed while suspended
[  202.514936] host_to_card, write iomem (2) failed: -1
[  202.514949] mwifiex_write_data_sync: not allowed while suspended
[  202.514965] host_to_card, write iomem (3) failed: -1
[  202.514976] mwifiex_write_data_async failed: 0xFFFFFFFF

This can be readily reproduced when putting the XO-4 in a loop where
it goes to sleep due to inactivity, but then wakes up due to an
incoming ping. The error is hit within an hour or two.

This issue happens when an interrupt comes in early while host sleep
is still activated. Driver handles this case by auto cancelling host
sleep. However is_suspended flag is still set which prevents any cmd
or data from being sent to firmware. Fix it by clearing is_suspended
flag in this path.

Reported-by: Daniel Drake <dsd@laptop.org>
Tested-by: Daniel Drake <dsd@laptop.org>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoath9k: fix key allocation error handling for powersave keys
Felix Fietkau [Sat, 27 Apr 2013 09:47:01 +0000 (11:47 +0200)]
ath9k: fix key allocation error handling for powersave keys

commit 4ef69d0394cba8caa9f75d3f2e53429bfb8b3045 upstream.

If no keycache slots are available, ath_key_config can return -ENOSPC.
If the key index is not checked for errors, it can lead to logspam that
looks like this: "ath: wiphy0: keyreset: keycache entry 228 out of range"
This can cause follow-up errors if the invalid keycache index gets
used for tx.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoext4: limit group search loop for non-extent files
Lachlan McIlroy [Mon, 6 May 2013 03:10:00 +0000 (23:10 -0400)]
ext4: limit group search loop for non-extent files

commit e6155736ad76b2070652745f9e54cdea3f0d8567 upstream.

In the case where we are allocating for a non-extent file,
we must limit the groups we allocate from to those below
2^32 blocks, and ext4_mb_regular_allocator() attempts to
do this initially by putting a cap on ngroups for the
subsequent search loop.

However, the initial target group comes in from the
allocation context (ac), and it may already be beyond
the artificially limited ngroups.  In this case,
the limit

if (group == ngroups)
group = 0;

at the top of the loop is never true, and the loop will
run away.

Catch this case inside the loop and reset the search to
start at group 0.

[sandeen@redhat.com: add commit msg & comments]

Signed-off-by: Lachlan McIlroy <lmcilroy@redhat.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agotick: Cleanup NOHZ per cpu data on cpu down
Thomas Gleixner [Fri, 3 May 2013 13:02:50 +0000 (15:02 +0200)]
tick: Cleanup NOHZ per cpu data on cpu down

commit 4b0c0f294f60abcdd20994a8341a95c8ac5eeb96 upstream.

Prarit reported a crash on CPU offline/online. The reason is that on
CPU down the NOHZ related per cpu data of the dead cpu is not cleaned
up. If at cpu online an interrupt happens before the per cpu tick
device is registered the irq_enter() check potentially sees stale data
and dereferences a NULL pointer.

Cleanup the data after the cpu is dead.

Reported-by: Prarit Bhargava <prarit@redhat.com>
Cc: Mike Galbraith <bitbucket@online.de>
Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1305031451561.2886@ionos
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agotimer: Don't reinitialize the cpu base lock during CPU_UP_PREPARE
Tirupathi Reddy [Tue, 14 May 2013 08:29:02 +0000 (13:59 +0530)]
timer: Don't reinitialize the cpu base lock during CPU_UP_PREPARE

commit 42a5cf46cd56f46267d2a9fcf2655f4078cd3042 upstream.

An inactive timer's base can refer to a offline cpu's base.

In the current code, cpu_base's lock is blindly reinitialized each
time a CPU is brought up. If a CPU is brought online during the period
that another thread is trying to modify an inactive timer on that CPU
with holding its timer base lock, then the lock will be reinitialized
under its feet. This leads to following SPIN_BUG().

<0> BUG: spinlock already unlocked on CPU#3, kworker/u:3/1466
<0> lock: 0xe3ebe000, .magic: dead4ead, .owner: kworker/u:3/1466, .owner_cpu: 1
<4> [<c0013dc4>] (unwind_backtrace+0x0/0x11c) from [<c026e794>] (do_raw_spin_unlock+0x40/0xcc)
<4> [<c026e794>] (do_raw_spin_unlock+0x40/0xcc) from [<c076c160>] (_raw_spin_unlock+0x8/0x30)
<4> [<c076c160>] (_raw_spin_unlock+0x8/0x30) from [<c009b858>] (mod_timer+0x294/0x310)
<4> [<c009b858>] (mod_timer+0x294/0x310) from [<c00a5e04>] (queue_delayed_work_on+0x104/0x120)
<4> [<c00a5e04>] (queue_delayed_work_on+0x104/0x120) from [<c04eae00>] (sdhci_msm_bus_voting+0x88/0x9c)
<4> [<c04eae00>] (sdhci_msm_bus_voting+0x88/0x9c) from [<c04d8780>] (sdhci_disable+0x40/0x48)
<4> [<c04d8780>] (sdhci_disable+0x40/0x48) from [<c04bf300>] (mmc_release_host+0x4c/0xb0)
<4> [<c04bf300>] (mmc_release_host+0x4c/0xb0) from [<c04c7aac>] (mmc_sd_detect+0x90/0xfc)
<4> [<c04c7aac>] (mmc_sd_detect+0x90/0xfc) from [<c04c2504>] (mmc_rescan+0x7c/0x2c4)
<4> [<c04c2504>] (mmc_rescan+0x7c/0x2c4) from [<c00a6a7c>] (process_one_work+0x27c/0x484)
<4> [<c00a6a7c>] (process_one_work+0x27c/0x484) from [<c00a6e94>] (worker_thread+0x210/0x3b0)
<4> [<c00a6e94>] (worker_thread+0x210/0x3b0) from [<c00aad9c>] (kthread+0x80/0x8c)
<4> [<c00aad9c>] (kthread+0x80/0x8c) from [<c000ea80>] (kernel_thread_exit+0x0/0x8)

As an example, this particular crash occurred when CPU #3 is executing
mod_timer() on an inactive timer whose base is refered to offlined CPU
#2.  The code locked the timer_base corresponding to CPU #2. Before it
could proceed, CPU #2 came online and reinitialized the spinlock
corresponding to its base. Thus now CPU #3 held a lock which was
reinitialized. When CPU #3 finally ended up unlocking the old cpu_base
corresponding to CPU #2, we hit the above SPIN_BUG().

CPU #0 CPU #3        CPU #2
------ -------        -------
.....  ......       <Offline>
mod_timer()
 lock_timer_base
   spin_lock_irqsave(&base->lock)

cpu_up(2)  .....         ......
init_timers_cpu()
....  .....      spin_lock_init(&base->lock)
.....    spin_unlock_irqrestore(&base->lock)  ......
   <spin_bug>

Allocation of per_cpu timer vector bases is done only once under
"tvec_base_done[]" check. In the current code, spinlock_initialization
of base->lock isn't under this check. When a CPU is up each time the
base lock is reinitialized. Move base spinlock initialization under
the check.

Signed-off-by: Tirupathi Reddy <tirupath@codeaurora.org>
Link: http://lkml.kernel.org/r/1368520142-4136-1-git-send-email-tirupath@codeaurora.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoSCSI: sd: fix array cache flushing bug causing performance problems
James Bottomley [Wed, 24 Apr 2013 21:02:53 +0000 (14:02 -0700)]
SCSI: sd: fix array cache flushing bug causing performance problems

commit 39c60a0948cc06139e2fbfe084f83cb7e7deae3b upstream.

Some arrays synchronize their full non volatile cache when the sd driver sends
a SYNCHRONIZE CACHE command.  Unfortunately, they can have Terrabytes of this
and we send a SYNCHRONIZE CACHE for every barrier if an array reports it has a
writeback cache.  This leads to massive slowdowns on journalled filesystems.

The fix is to allow userspace to turn off the writeback cache setting as a
temporary measure (i.e. without doing the MODE SELECT to write it back to the
device), so even though the device reported it has a writeback cache, the
user, knowing that the cache is non volatile and all they care about is
filesystem correctness, can turn that bit off in the kernel and avoid the
performance ruinous (and safety irrelevant) SYNCHRONIZE CACHE commands.

The way you do this is add a 'temporary' prefix when performing the usual
cache setting operations, so

echo temporary write through > /sys/class/scsi_disk/<disk>/cache_type

Reported-by: Ric Wheeler <rwheeler@redhat.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoxen/vcpu/pvhvm: Fix vcpu hotplugging hanging.
Konrad Rzeszutek Wilk [Sun, 5 May 2013 13:30:09 +0000 (09:30 -0400)]
xen/vcpu/pvhvm: Fix vcpu hotplugging hanging.

commit 7f1fc268c47491fd5e63548f6415fc8604e13003 upstream.

If a user did:

echo 0 > /sys/devices/system/cpu/cpu1/online
echo 1 > /sys/devices/system/cpu/cpu1/online

we would (this a build with DEBUG enabled) get to:
smpboot: ++++++++++++++++++++=_---CPU UP  1
.. snip..
smpboot: Stack at about ffff880074c0ff44
smpboot: CPU1: has booted.

and hang. The RCU mechanism would kick in an try to IPI the CPU1
but the IPIs (and all other interrupts) would never arrive at the
CPU1. At first glance at least. A bit digging in the hypervisor
trace shows that (using xenanalyze):

[vla] d4v1 vec 243 injecting
   0.043163027 --|x d4v1 intr_window vec 243 src 5(vector) intr f3
]  0.043163639 --|x d4v1 vmentry cycles 1468
]  0.043164913 --|x d4v1 vmexit exit_reason PENDING_INTERRUPT eip ffffffff81673254
   0.043164913 --|x d4v1 inj_virq vec 243  real
  [vla] d4v1 vec 243 injecting
   0.043164913 --|x d4v1 intr_window vec 243 src 5(vector) intr f3
]  0.043165526 --|x d4v1 vmentry cycles 1472
]  0.043166800 --|x d4v1 vmexit exit_reason PENDING_INTERRUPT eip ffffffff81673254
   0.043166800 --|x d4v1 inj_virq vec 243  real
  [vla] d4v1 vec 243 injecting

there is a pending event (subsequent debugging shows it is the IPI
from the VCPU0 when smpboot.c on VCPU1 has done
"set_cpu_online(smp_processor_id(), true)") and the guest VCPU1 is
interrupted with the callback IPI (0xf3 aka 243) which ends up calling
__xen_evtchn_do_upcall.

The __xen_evtchn_do_upcall seems to do *something* but not acknowledge
the pending events. And the moment the guest does a 'cli' (that is the
ffffffff81673254 in the log above) the hypervisor is invoked again to
inject the IPI (0xf3) to tell the guest it has pending interrupts.
This repeats itself forever.

The culprit was the per_cpu(xen_vcpu, cpu) pointer. At the bootup
we set each per_cpu(xen_vcpu, cpu) to point to the
shared_info->vcpu_info[vcpu] but later on use the VCPUOP_register_vcpu_info
to register per-CPU  structures (xen_vcpu_setup).
This is used to allow events for more than 32 VCPUs and for performance
optimizations reasons.

When the user performs the VCPU hotplug we end up calling the
the xen_vcpu_setup once more. We make the hypercall which returns
-EINVAL as it does not allow multiple registration calls (and
already has re-assigned where the events are being set). We pick
the fallback case and set per_cpu(xen_vcpu, cpu) to point to the
shared_info->vcpu_info[vcpu] (which is a good fallback during bootup).
However the hypervisor is still setting events in the register
per-cpu structure (per_cpu(xen_vcpu_info, cpu)).

As such when the events are set by the hypervisor (such as timer one),
and when we iterate in __xen_evtchn_do_upcall we end up reading stale
events from the shared_info->vcpu_info[vcpu] instead of the
per_cpu(xen_vcpu_info, cpu) structures. Hence we never acknowledge the
events that the hypervisor has set and the hypervisor keeps on reminding
us to ack the events which we never do.

The fix is simple. Don't on the second time when xen_vcpu_setup is
called over-write the per_cpu(xen_vcpu, cpu) if it points to
per_cpu(xen_vcpu_info).

Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agodm snapshot: fix error return code in snapshot_ctr
Wei Yongjun [Fri, 10 May 2013 13:37:15 +0000 (14:37 +0100)]
dm snapshot: fix error return code in snapshot_ctr

commit 09e8b813897a0f85bb401435d009228644c81214 upstream.

Return -ENOMEM instead of success if unable to allocate pending
exception mempool in snapshot_ctr.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoACPICA: Fix possible buffer overflow during a field unit read operation
Bob Moore [Wed, 8 May 2013 04:01:15 +0000 (04:01 +0000)]
ACPICA: Fix possible buffer overflow during a field unit read operation

commit 61388f9e5d93053cf399a356414f31f9b4814c6d upstream.

Can only happen under these conditions: 1) The DSDT version is 1,
meaning integers are 32-bits.  2) The field is between 33 and 64
bits long.

It applies cleanly back to ACPICA 20100806+ (Linux v2.6.37+).

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoASoC: wm8994: missing break in wm8994_aif3_hw_params()
Dan Carpenter [Tue, 30 Apr 2013 07:24:41 +0000 (10:24 +0300)]
ASoC: wm8994: missing break in wm8994_aif3_hw_params()

commit 4495e46fe18f198366961bb2b324a694ef8a9b44 upstream.

The missing break here means that we always return early and the
function is a no-op.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoARM: OMAP: RX-51: change probe order of touchscreen and panel SPI devices
Aaro Koskinen [Wed, 8 May 2013 23:48:00 +0000 (16:48 -0700)]
ARM: OMAP: RX-51: change probe order of touchscreen and panel SPI devices

commit e65f131a14726e5f1b880a528271a52428e5b3a5 upstream.

Commit 9fdca9df (spi: omap2-mcspi: convert to module_platform_driver)
broke the SPI display/panel driver probe on RX-51/N900. The exact cause is
not fully understood, but it seems to be related to the probe order. SPI
communication to the panel driver (spi1.2) fails unless the touchscreen
(spi1.0) has been probed/initialized before. When the omap2-mcspi driver
was converted to a platform driver, it resulted in that the devices are
probed immediately after the board registers them in the order they are
listed in the board file.

Fix the issue by moving the touchscreen before the panel in the SPI
device list.

The patch fixes the following failure:

[    1.260955] acx565akm spi1.2: invalid display ID
[    1.265899] panel-acx565akm display0: acx_panel_probe panel detect error
[    1.273071] omapdss CORE error: driver probe failed: -19

Tested-by: Sebastian Reichel <sre@debian.org>
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Pali Rohár <pali.rohar@gmail.com>
Cc: Joni Lapilainen <joni.lapilainen@gmail.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoKVM: VMX: fix halt emulation while emulating invalid guest sate
Gleb Natapov [Wed, 8 May 2013 15:38:44 +0000 (18:38 +0300)]
KVM: VMX: fix halt emulation while emulating invalid guest sate

commit 8d76c49e9ffeee839bc0b7a3278a23f99101263e upstream.

The invalid guest state emulation loop does not check halt_request
which causes 100% cpu loop while guest is in halt and in invalid
state, but more serious issue is that this leaves halt_request set, so
random instruction emulated by vm86 #GP exit can be interpreted
as halt which causes guest hang. Fix both problems by handling
halt_request in emulation loop.

Reported-by: Tomas Papan <tomas.papan@gmail.com>
Tested-by: Tomas Papan <tomas.papan@gmail.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoLinux 3.0.78
Greg Kroah-Hartman [Sat, 11 May 2013 20:38:25 +0000 (13:38 -0700)]
Linux 3.0.78

5 years agoRevert "x86, amd: Disable way access filter on Piledriver CPUs" it is duplicated
Andre Przywara [Wed, 31 Oct 2012 16:20:50 +0000 (17:20 +0100)]
Revert "x86, amd: Disable way access filter on Piledriver CPUs" it is duplicated

Revert 5e3fe67e02c53e5a5fcf0e2b0d91dd93f757d50b which is
commit 2bbf0a1427c377350f001fbc6260995334739ad7 upstream.

Willy pointed out that I messed up and applied this one twice to the
3.0-stable tree, so revert the second instance of it.

Reported by: Willy Tarreau <w@1wt.eu>
Cc: Andre Przywara <osp@andrep.de>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: CAI Qian <caiqian@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
reverted:

5 years agox86/mm: account for PGDIR_SIZE alignment
Jerry Hoemann [Tue, 30 Apr 2013 21:15:55 +0000 (15:15 -0600)]
x86/mm: account for PGDIR_SIZE alignment

Patch for -stable.  Function find_early_table_space removed upstream.

Fixes panic in alloc_low_page due to pgt_buf overflow during
init_memory_mapping.

find_early_table_space sizes pgt_buf based upon the size of the
memory being mapped, but it does not take into account the alignment
of the memory.  When the region being mapped spans a 512GB (PGDIR_SIZE)
alignment, a panic from alloc_low_pages occurs.

kernel_physical_mapping_init takes into account PGDIR_SIZE alignment.
This causes an extra call to alloc_low_page to be made.  This extra call
isn't accounted for by find_early_table_space and causes a kernel panic.

Change is to take into account PGDIR_SIZE alignment in find_early_table_space.

Signed-off-by: Jerry Hoemann <jerry.hoemann@hp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agokernel/audit_tree.c: tree will leak memory when failure occurs in audit_trim_trees()
Chen Gang [Mon, 29 Apr 2013 22:05:19 +0000 (15:05 -0700)]
kernel/audit_tree.c: tree will leak memory when failure occurs in audit_trim_trees()

commit 12b2f117f3bf738c1a00a6f64393f1953a740bd4 upstream.

audit_trim_trees() calls get_tree().  If a failure occurs we must call
put_tree().

[akpm@linux-foundation.org: run put_tree() before mutex_lock() for small scalability improvement]
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jonghwan Choi <jhbird.choi@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agotracing: Fix ftrace_dump()
Steven Rostedt (Red Hat) [Fri, 15 Mar 2013 17:10:35 +0000 (13:10 -0400)]
tracing: Fix ftrace_dump()

commit 7fe70b579c9e3daba71635e31b6189394e7b79d3 upstream.

ftrace_dump() had a lot of issues. What ftrace_dump() does, is when
ftrace_dump_on_oops is set (via a kernel parameter or sysctl), it
will dump out the ftrace buffers to the console when either a oops,
panic, or a sysrq-z occurs.

This was written a long time ago when ftrace was fragile to recursion.
But it wasn't written well even for that.

There's a possible deadlock that can occur if a ftrace_dump() is happening
and an NMI triggers another dump. This is because it grabs a lock
before checking if the dump ran.

It also totally disables ftrace, and tracing for no good reasons.

As the ring_buffer now checks if it is read via a oops or NMI, where
there's a chance that the buffer gets corrupted, it will disable
itself. No need to have ftrace_dump() do the same.

ftrace_dump() is now cleaned up where it uses an atomic counter to
make sure only one dump happens at a time. A simple atomic_inc_return()
is enough that is needed for both other CPUs and NMIs. No need for
a spinlock, as if one CPU is running the dump, no other CPU needs
to do it too.

The tracing_on variable is turned off and not turned on. The original
code did this, but it wasn't pretty. By just disabling this variable
we get the result of not seeing traces that happen between crashes.

For sysrq-z, it doesn't get turned on, but the user can always write
a '1' to the tracing_on file. If they are using sysrq-z, then they should
know about tracing_on.

The new code is much easier to read and less error prone. No more
deadlock possibility when an NMI triggers here.

Reported-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agodrm/radeon: fix possible segfault when parsing pm tables
Alex Deucher [Thu, 25 Apr 2013 13:29:17 +0000 (09:29 -0400)]
drm/radeon: fix possible segfault when parsing pm tables

commit f8e6bfc2ce162855fa4f9822a45659f4b542c960 upstream.

If we have a empty power table, bail early and allocate
the default power state.

Should fix:
https://bugs.freedesktop.org/show_bug.cgi?id=63865

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agodrm/radeon: fix endian bugs in atom_allocate_fb_scratch()
Alex Deucher [Wed, 24 Apr 2013 18:39:31 +0000 (14:39 -0400)]
drm/radeon: fix endian bugs in atom_allocate_fb_scratch()

commit beb71fc61c2cad64e347f164991b8ef476529e64 upstream.

Reviwed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>