Add zones (areas filled with copper).
[openbiosprog:openbiosprog-spi.git] / hardware /
2010-08-09 Uwe HermannAdd zones (areas filled with copper).
2010-08-09 Uwe HermannMake Mini-USB footprint more generic.
2010-08-09 Uwe HermannPCB cosmetics.
2010-08-06 Uwe HermannAdd project name, version, license as text on PCB.
2010-08-06 Uwe HermannReroute to integrate new 8pin header.
2010-08-06 Uwe HermannCosmetics.
2010-08-06 Uwe HermannUpdate clean rule in Makefile.
2010-08-06 Uwe HermannAdd/use modified 4x2-DIP-8 symbol/footprint.
2010-08-06 Uwe HermannAdd additional (optional) 4x2 pin header.
2010-08-06 Uwe HermannRearrange PCB stuff preparing for 8pin header.
2010-08-06 Uwe HermannMove all refdes/silkscreen names to proper places.
2010-08-06 Uwe HermannSchematics cosmetics.
2010-08-06 Uwe HermannMore PCB optimizations.
2010-08-06 Uwe HermannPCB micro-optimizations and beautifications.
2010-08-06 Uwe HermannSome PCB cosmetics, also fixed all DRC warnings.
2010-08-06 Uwe HermannRun "Cleanup tracks and vias" function.
2010-08-06 Uwe HermannFirst attempt at routing the board.
2010-08-04 Uwe HermannDrop (optional) EEPROM for now too.
2010-08-02 Uwe HermannCosmetics.
2010-08-02 Uwe HermannArrange refdes silkscreen text so it's readable.
2010-08-02 Uwe HermannReduce board size to 44mm x 20mm.
2010-08-02 Uwe HermannCosmetics.
2010-08-02 Uwe HermannReduce board size to 45mm x 20mm.
2010-08-02 Uwe HermannReflect updated netlist in PCB.
2010-08-02 Uwe HermannExport updated netlist due to schematics changes.
2010-08-02 Uwe HermannMark unused pins as NC.
2010-08-02 Uwe HermannSimplify schematic a bit, cosmetics.
2010-08-02 Uwe HermannRemove breakout pin headers again.
2010-08-02 Uwe HermannFurther adjustments of component placement.
2010-08-02 Uwe HermannMore PCB component re-arrangements.
2010-08-02 Uwe HermannMake some components values invisible.
2010-08-02 Uwe HermannPCB rearrangements.
2010-08-02 Uwe HermannAdd Makefile.
2010-07-29 Uwe HermannBetter component arrangement and smaller board.
2010-07-29 Uwe HermannAdd a 100mm x 65mm board outline for now.
2010-07-29 Uwe HermannDisperse components on the PCB a bit.
2010-07-29 Uwe HermannImported netlist into PCB.
2010-07-29 Uwe HermannFootprint name fix (s/TANT_A/TANTAL_A).
2010-07-29 Uwe HermannChange R11 (for LED) to 1k for simplicity.
2010-07-29 Uwe HermannAdd generated netlist file.
2010-07-29 Uwe HermannAdd footprints for tantal A and D packages.
2010-07-28 Uwe HermannHide Kicad-internal PWR_FLAGs in the schematics.
2010-07-28 Uwe HermannAdd power LED.
2010-07-28 Uwe HermannAdd two additional connectors for ACBUS/BCBUS.
2010-07-28 Uwe HermannRename HC49US footprint to HC49-US.
2010-07-28 Uwe HermannCosmetics.
2010-07-28 Uwe HermannReplace 8-pin connectors with 12-pin ones.
2010-07-28 Uwe HermannC8 (3.3uF) is actually polarized, tantal.
2010-07-28 Uwe HermannAdd some missing footprints for components.
2010-07-28 Uwe HermannSplit out J1/J2, connect SPI_HOLD and SPI_WP.
2010-07-28 Uwe HermannFix 93C46-EEPROM name (needs hyphen).
2010-07-28 Uwe HermannRearrangements.
2010-07-28 Uwe HermannAdd connectors J1 and J2 for FT2232H channel A/B.
2010-07-28 Uwe HermannUse 4k7 resistors for all pull-ups.
2010-07-28 Uwe HermannMention GPIOL0-3 pin names.
2010-07-28 Uwe HermannRearrangements.
2010-07-28 Uwe HermannFT2232H spacing fixes for better readability.
2010-07-28 Uwe HermannAdd optional 93C46 EEPROM circuitry.
2010-07-28 Uwe HermannAdd 93C46 EEPROM symbol.
2010-07-28 Uwe HermannRe-arrange some components.
2010-07-28 Uwe HermannAdd proper PWR_FLAG symbols -> 0 ERC warnings.
2010-07-28 Uwe HermannAdd 0 Ohm resistor for USB shield/GND.
2010-07-28 Uwe HermannFix various incorrect FT2232H pin categories.
2010-07-28 Uwe HermannReplace LDO capacitors with 10uF/100uF tantal.
2010-07-28 Uwe HermannFirst attempt at a MINI-USB-B-SMD footprint.
2010-07-28 Uwe HermannFancy silk screen for the HC49US footprint.
2010-07-28 Uwe HermannAdd HC49US footprint to lib.
2010-07-28 Uwe HermannMark USB ID pin "no-connect".
2010-07-27 Uwe HermannFix footprint name typo: s/DIP-8_300/DIP-8__300/.
2010-07-27 Uwe HermannAdd *.mod file containing an LQFP64 footprint.
2010-07-26 Uwe HermannAdd openbiosprog-spi.mod module file to project.
2010-07-26 Uwe HermannAdd empty board file (*.brd).
2010-07-26 Uwe HermannAdd PWR_FLAG to VBUS to let ERC know it's OK.
2010-07-26 Uwe HermannERC: Fix some incorrect pin categories.
2010-07-26 Uwe HermannFix ERC warnings due to incorrect wires.
2010-07-26 Uwe HermannAnnotate schematics (give components refdes names).
2010-07-26 Uwe HermannAdd values for most components in the schematic.
2010-07-26 Uwe HermannAdd missing footprints in schematic.
2010-07-26 Uwe HermannSchematics/layout license as full sentence.
2010-07-26 Uwe HermannRe-arrange schematics for better readability.
2010-07-26 Uwe HermannFix typos: s/0603/SM0603/.
2010-07-26 Uwe HermannFootprints for some components in the schematic.
2010-07-26 Uwe HermannConnect USB ID pin and shield pins to GND.
2010-07-26 Uwe HermannRename Micro-USB symbol to MINI-USB-B-SMD.
2010-07-26 Uwe HermannAdd shield pins (SH1-4) to Mini-USB B connector.
2010-07-26 Uwe HermannAdd pullups to SPI signals tied to VCC.
2010-07-23 Uwe HermannAdd SPI chip circuitry.
2010-07-23 Uwe HermannAdd 12MHz crystal circuitry.
2010-07-23 Uwe HermannFix bugs around the chip ferrite beads.
2010-07-23 Uwe HermannVarious small schematics improvements.
2010-07-23 Uwe HermannAdd micro-USB type B connector.
2010-07-23 Uwe HermannMove files to hardware/0.1/ subdir.