2010-07-22 Sergio Aguirreomap3beagle: camera: Change MT9T111 references to new...
2010-07-22 Sergio AguirreDEBUG: omap3beagle: Add MT9T112 to defconfig
2010-07-22 Sergio Aguirremt9t112: Fix null pointer kernel bug
2010-07-22 Sergio Aguirremt9t112: Add more info to public header
2010-07-22 Sergio Aguirremt9t112: Migrate from soc_camera to v4l2-int-device
2010-07-22 Kuninori Morimotosoc-camera: mt9t112: modify exiting conditions from...
2010-07-22 Kuninori MorimotoV4L/DVB (13670): soc-camera: Add mt9t112 camera driver
2010-07-22 Sergio AguirreREMOVE: v4l2: Delete MT9T111 sensor driver
2010-07-22 Sergio Aguirreomap3beagle: camera: Bring back mt9t111 support
2010-07-22 Sergio Aguirreomap3beagle: camera: Cleanup regulator usage
2010-07-22 Sergio Aguirreomap3beagle: camera: Cleanup of boardfile
2010-07-22 Vaibhav Hiremathmt9v113: AE param tuned to get 28~30FPS
2010-07-22 Vaibhav Hiremathmt9v113: Settings from Aptima used to increase FPS
2010-07-22 Vaibhav Hiremathomap3beagle-camera: Further clode cleanup
2010-07-22 Vaibhav HiremathMT9V113: Min, Max clk input changed as per the spec
2010-07-22 Vaibhav Hiremathmt9v113:Clean Up: Remove unneccessary code/printf
2010-07-22 Vaibhav Hiremathomap3beagle-camera:Clean up: Remove unneccessary code...
2010-07-22 Sergio Aguirreomap3beagle: camera: Fix parallel i/f settings
2010-07-22 Sergio Aguirreomap3isp: ccdc: Set datalines to 10 for YUV_SYNC
2010-07-22 Sergio Aguirreomap3isp: Set vd_pol to 0 by default on all cases
2010-07-22 Sergio Aguirreomap3isp: Fix bad YUV_BT checks in datapath_config
2010-07-22 Sergio Aguirreomap3isp: Fix Wrong check on non-interlaced sensor...
2010-07-22 Sergio Aguirremt9v113: Fix wrong active widths
2010-07-22 Vaibhav HiremathMT9V113: Fixed sensor nitialization issues
2010-07-22 Koen KooiBeagleXM:Cam: Add support for MT9V113 VGA Sensor
2010-07-22 Sergio AguirreWIP: mt9t111: Work in progress for camera enablement
2010-07-22 Koen Kooiomap3beagle: camera: only register camera driver for...
2010-07-22 Sergio Aguirreomap3beagle: camera: Set padconf settings in cam init
2010-07-22 Sergio Aguirremt9t111: Fix detect function retval and cleanup prints
2010-07-22 Sergio Aguirreomap3beagle: camera: Complement remainig sensor hw...
2010-07-22 Sergio Aguirreomap3beagle: camera: Rename regulators to match actual...
2010-07-22 Sergio Aguirreomap3beagle: camera: Change vaux4 to 1.8v
2010-07-22 Sergio Aguirreomap3beagle: camera: Fix powerup sequence
2010-07-22 Sergio Aguirreomap3beagle: camera: Clarify regulators names
2010-07-22 Sergio Aguirremt9t111: Fix max supported xclk
2010-07-22 Sergio Aguirreomap3beagle: camera: set mclk for mt9t111
2010-07-22 Sergio Aguirreomap3isp: core: Do smarter MCLK setting
2010-07-22 Penda, NaveenFix: Moved MCLK setting to the board file
2010-07-22 Tuukka Toivonenomap3isp: set CAM_MCLK to 172.8 MHz, allows exact 9...
2010-07-22 Sergio Aguirreomap3beagle: camera: Fix wrong XCLKA selection
2010-07-22 Sergio AguirreRevert "DEBUG: omap3beagle: camera: Force mode0 in...
2010-07-22 Sergio AguirreOMAP3: CLOCK: Add capability to change rate of dpll4_m5...
2010-07-22 Sergio AguirreDEBUG: omap3beagle: camera: Force mode0 in cam_xclka
2010-07-22 Koen KooiARM: OMAP3: make camera code build if MT9T111 is built...
2010-07-22 Sergio Aguirreomap3beagle: camera: Move i2c registration to the main...
2010-07-22 Sergio Aguirreomap3beagle: camera: Change arch -> late_initcall
2010-07-22 Sergio AguirreRevert "TEMP: omap3beagle: cam: Enable OMAP_MUX"
2010-07-22 Sergio Aguirreomap3beagle: camera: Fix null pointer dereference
2010-07-22 Sergio AguirreTEMP: omap3beagle: cam: Enable OMAP_MUX
2010-07-22 Sergio Aguirreomap3beagle: camera: Add support for regulators
2010-07-22 Sergio AguirreTEMP: omap3beagle: camera: Add defconfig
2010-07-22 Sergio Aguirreomap3beagle: Add camera support
2010-07-22 Sergio Aguirremt9t111: Pass v4l2_int_device data
2010-07-22 Sergio Aguirremt9t111: Fix all checkpatch errors
2010-07-22 OpenEmbedded... mt9t111: first stab at merging sensor driver based...
2010-07-22 Koen KooiHACK: try to poweron stuff on xM rev A
2010-07-22 Koen Kooiclock34xx: only try to idle IVA subsys when CONFIG_PM...
2010-07-22 Ranjith Lohithakshanattemp to fix serial console corruption during cpuidle
2010-07-22 Koen KooiARM: OMAP: beagle: add support for beagleFPGA expansion...
2010-07-22 Koen KooiARM: OMAP: beagle: every known beagle (except revB...
2010-07-22 Steve SakomanMTD: silence ecc errors on mtdblock0
2010-07-22 Ajay Kumar... musb: allow host io without gadget module
2010-07-22 Mans RullgardARM: Expose some PMON registers through sysfs
2010-07-22 Mans RullgardARM: Add option to allow userspace access to performanc...
2010-07-22 Mans RullgardARM: Add option to allow userspace PLE access
2010-07-22 Mans RullgardARM: Expose some CPU control registers via sysfs
2010-07-22 Mans RullgardARM: Print warning on alignment trap in kernel mode
2010-07-22 Mans RullgardARM: Add prompt for CONFIG_ALIGNMENT_TRAP
2010-07-22 Steve SakomanRTC: add support for backup battery recharge
2010-07-22 Koen Kooimodedb.c: add proper 720p60 mode
2010-07-22 Prabindh SundaresonSwitch SGX clocks to 200MHz on DM37xx/OMAP36xx
2010-07-22 Imre DeakARM: VFP: preserve the HW context when calling signal...
2010-07-22 Imre DeakARM: VFP: add support to sync the VFP state of the...
2010-07-22 Kishore KadiyalaFix for bus width which improves SD card's peformance.
2010-07-22 Steve SakomanOMAP: DSS2: Add support for LG Philips LB035Q02 panel
2010-07-22 Koen KooiOMAP: DSS2: (Re)add support for Samsung lte430wq-f0c...
2010-07-22 Koen Kooitwl4030-madc: adjust for twl4030 -> twl api changes
2010-07-22 Koen Kooiboard-overo: add PM code and sync with
2010-07-22 Steve SakomanARM: OMAP2: mmc-twl4030: move clock input selection...
2010-07-22 Steve Sakomanmmc: don't display single block read console messages
2010-07-22 Steve Sakomannetdev: rt73usb - add vendor/device ID for Ceiva Wirele...
2010-07-22 Steve SakomanARM: OMAP: Add twl4030 madc support to Beagle
2010-07-22 Steve SakomanARM: OMAP: Add twl4030 madc support to Overo
2010-07-22 Steve SakomanARM: OMAP: Add missing twl4030 madc header file
2010-07-22 Steve Sakomandrivers: mfd: add twl4030 madc driver
2010-07-22 Steve Sakomandrivers: input: touchscreen: ads7846: return ENODEV...
2010-07-22 Steve Sakomandrivers: net: smsc911x: return ENODEV if device is...
2010-07-22 Steve SakomanARM: OMAP: Overo: Add support for second ethernet port
2010-07-22 Koen KooiISP: add some more from Leopard imaging patch
2010-07-22 Steve SakomanDSS2: add bootarg for selecting svideo or composite...
2010-07-22 Sudeep BasavarajOMAP3630:DSS2:Enable Pre-Multiplied Alpha Support
2010-07-22 Steve SakomanMTD: NAND: omap2: proper fix for subpage read ECC errors
2010-07-22 Steve SakomanASoC: enable audio capture by default for twl4030
2010-07-22 Koen KooiARM: OMAP: update beagleboard defconfig
2010-07-22 Koen KooiARM: OMAP: beagleboard: initialize ds1307 and eeprom...
2010-07-22 Koen KooiARM: OMAP: beagleboard: pre-export GPIOs to userspace...
2010-07-22 Koen KooiARM: OMAP: beagleboard: Add infrastructure to do fixups...
2010-07-22 Koen Kooiboard-omap3beagle: prepare for DM3730 based BeagleboardXM
2010-07-22 Koen Kooiboard-omap3-beagle: add DSS2 support
2010-07-22 Steve SakomanARM: OMAP: Make beagle u-boot partition writable