anelok:anelok.git
2014-06-02 Werner Almesbergerhw/anelok.kicad_pcb: add zone cutout areas; minor trace... dftv
2014-06-02 Werner Almesbergerhw/: route RF_nSEL to P2_0 not P0_2 (argh !)
2014-06-01 Werner Almesbergerhw/anelok.kicad_pcb: add/improve ground zones around...
2014-06-01 Werner Almesbergerhw/anelok.kicad_pcb: cross-hatch pattern under capaciti...
2014-06-01 Werner Almesbergerhw/: DISP_SDIN and DISP_SCLK were offset by one pin...
2014-06-01 Werner Almesbergerhw/: add RF vias; widen antenna feed
2014-06-01 Werner Almesbergerhw/: design sub-board
2014-06-01 Werner Almesbergerhw/Makefile (report), hw/anelok.exceptions: filter...
2014-06-01 Werner Almesbergerhw/: add orientation markers to QFN and make LED polari...
2014-06-01 Werner Almesbergerhw/: replace dodgy MPD battery holder with Keystone...
2014-06-01 Werner AlmesbergerBOOKSHELF (1059, 1060): add Keystone CR2023 battery...
2014-06-01 Werner Almesbergerhw/anelok.kicad_pcb: correct DRC issue (ground via...
2014-06-01 Werner Almesbergerhw/: add ground zones, main text, extra VSYS path
2014-06-01 Werner Almesbergerhw/: fully routed
2014-05-31 Werner Almesbergerhw/: first experimental placement of the right side...
2014-05-30 Werner Almesbergerhw/: fully routed and 1.5 mm shorter (66.5 mm -> 65 mm) split
2014-05-30 Werner Almesbergerhw/: completed more of the layout
2014-05-30 Werner Almesbergerme/STACKIN.SPLIT: updated stacking
2014-05-30 Werner Almesbergerhw/NOTES: update with descriptions from other boards
2014-05-30 Werner Almesbergerhw/: first try of the "split" design (WIP)
2014-05-29 Werner Almesbergerfirst partial try with the CPU in a "USB west" orientation
2014-05-27 Werner Almesbergerhw/pcb/Makefile: design orientation and board properties
2014-05-27 Werner Almesbergerhw/anelok.kicad_pcb: moved charge pump capacitors away...
2014-05-24 Werner Almesbergerhw/anelok.kicad_pcb: widen capacitive sensor by 3 ...
2014-05-24 Werner Almesbergerhw/pcb/Makefile: increase zone clearance from 0.3 to...
2014-05-24 Werner Almesbergerhw/sub.sch: remove "no connect" marker from traces...
2014-05-24 Werner Almesbergerhw/anelok.kicad_pcb: update date code and add direction...
2014-05-24 Werner Almesbergerhw/: connect both boards, for easier PCB making and...
2014-05-23 Werner Almesbergerhw/: route VRF to an interrupt-capable pin of the KL26
2014-05-23 Werner Almesbergerhw/anelok.kicad_pcb: move boards closer together
2014-05-23 Werner Almesbergerhw/anelok.kicad_pcb: align boards and remove obsolete...
2014-05-23 Werner Almesbergerhw/: correct ERC complaints
2014-05-23 Werner Almesbergerhw/: add varistors to rfkill switch
2014-05-23 Werner Almesbergerhw/anelok.kicad_pcb: capacitive sensor board version V1A
2014-05-23 Werner Almesbergerhw/anelok.kicad_pcb: added ground zones and text
2014-05-23 Werner Almesbergerhw/anelok.kicad_pcb: updated PCB outline
2014-05-23 Werner Almesbergerhw/anelok.kicad_pcb: pulled in memory card holder by...
2014-05-23 Werner Almesbergerhw/: fully routed
2014-05-23 Werner Almesbergerhw/: almost fully routed feature-complete design
2014-05-21 Werner Almesbergerhw/anelok.kicad_pcb: rough tentative placing (but with...
2014-05-21 Werner Almesbergerme/STACKING.LARGE: mechanical stacking for the "large...
2014-05-21 Werner Almesbergerhw/anelok.kicad_pcb: make an ugly connection to the LED
2014-05-21 Werner Almesbergerhw/: first try at layout (WIP)
2014-05-20 Werner Almesbergerme/case.fpd: rough outline of the new case (in progress)
2014-05-20 Werner Almesbergerhw/anelok.cmp: update footprint association
2014-05-20 Werner AlmesbergerBOOKSHELF (32k): add various 32.768 kHz crystals in...
2014-05-20 Werner Almesbergerhw/: add a crystal to the KL26 and remove RF_CLK
2014-05-20 Werner Almesbergerhw/anelok.cmp: footprint associations
2014-05-20 Werner Almesbergerhw/: replace FETs in SOT-323 with SOT-523
2014-05-20 Werner Almesbergerhw/: re-annotate everything
2014-05-20 Werner Almesbergerhw/anelok.sch: order sheets according to appearance
2014-05-13 Werner Almesbergerfw/: fix minor issues detected by ERC
2014-05-13 Werner Almesbergerhw/user.sch: rename to disp.sch ("Display")
2014-05-13 Werner Almesbergerhw/: move capacitive sensor and battery holder to sub...
2014-05-13 Werner Almesbergerhw/anelok.pro (modules): remove switches; change batter...
2014-05-13 Werner Almesbergerhw/anelok.pro: remove no longer needed device_sot.lib
2014-05-13 Werner Almesbergerhw/: rearrange test points (TP12 to 3V3; TP3 on VBUS...
2014-05-13 Werner Almesbergerhw/power.sch: make CON4 an LP2032SM; show If of D2...
2014-05-12 Werner Almesbergerhw/power.sch: add diode to prevent battery -> VUSB...
2014-05-12 Werner AlmesbergerTODO: conducted experiment showing that current can...
2014-05-12 Werner AlmesbergerBOOKSHELF: add n-FET in SOT-323, add SOT-523 FETs,...
2014-05-12 Werner Almesbergerdoc/fets.fig: equivalent FET circuit topologies (for...
2014-05-12 Werner Almesbergerhw/: KiCAD's internal reshuffling of things
2014-05-12 Werner Almesbergerhw/user.sch: add "POWERED" flag to DISP_VDD
2014-05-12 Werner Almesbergerhw/memcard.sch (CON3, R3): document possible configurat...
2014-05-12 Werner Almesbergerhw/power.sch (U3): add options for AAT1217-3.3, AAT1217...
2014-05-11 Werner Almesbergerhw/power.sch: add TVS at battery
2014-05-11 Werner Almesbergerhw/anelok.sch (U1): swap DISP_SCLK (PTD6) and CARD_DAT2...
2014-05-11 Werner Almesbergerhw/: add FET pair to switch OLED power
2014-05-11 Werner Almesbergerhw/anelok.sch (TP4 .. TP8): remove all TPs for "extensions"
2014-05-11 Werner Almesbergerhw/power.sch (Q1): use p-FET, not n-FET
2014-05-11 Werner Almesbergerhw/: add USB_nSENSE signal to detect presence of VBUS
2014-05-11 Werner AlmesbergerTODO: move or remove obsolete items
2014-05-10 Werner Almesbergerhw/user.sch: add 0R resistors to capacitive sensor...
2014-05-10 Werner AlmesbergerBOOKSHELF, doc/comp/xtal.txt: add crystal selection...
2014-05-10 Werner Almesbergerfw/: add n-FET to drive memcard p-FET Q2, to ensure...
2014-05-10 Werner Almesbergerhw/anelok.sch: more RF_DD from PTC0 to PTA19, location...
2014-05-09 Werner Almesbergerhw/: replace wheel with capacitive sensor
2014-05-09 Werner Almesbergerhw/anelok.sch: make memcard sub-sheet symbol match...
2014-05-09 Werner Almesbergerhw/: resolve a few minor ERC complaints
2014-05-09 Werner Almesbergerhw/: replace AT86RF232 with CC2543 (circuit from Y...
2014-05-09 Werner Almesbergerhw/anelok.sch (R10, R11): add 33 Ohm series resistors...
2014-05-09 Werner Almesbergerhw/ (Q1): remove dodgy reverse current protection;...
2014-05-09 Werner Almesbergerhw/power.sch (R9, SW2): remove "current throttle"
2014-05-09 Werner Almesbergerhw/anelok.sch (U1): switch from MKL25Z128VFT4 to MKL26Z...
2014-05-09 Werner Almesbergerhw/: copy to hw-brd0/
2014-05-09 Werner AlmesbergerBOOKSHELF (AN3863, touch): "Designing Touch Sensing...
2014-04-27 Werner Almesbergerdoc/evol-hw.fig: show transition from KL25 to KL26
2014-04-26 Werner Almesbergerdoc/evol-hw.fig: add durability to slider benefits
2014-04-23 Werner Almesbergerdoc/evol-hw.fig: s/nRF51882/nRF51822/
2014-04-23 Werner Almesbergerdoc/evol-hw.fig: Anelok hardware design evolution ...
2014-04-22 Werner AlmesbergerAUTHORS: regenerated
2014-04-22 Werner AlmesbergerINSTALL: reduce indentation; add shell prompts; slight...
2014-04-22 Werner AlmesbergerINSTALL: clean up and streamline instructions
2014-04-22 Werner AlmesbergerBOOKSHELF (AN4023 aka stm32sfu): update URL
2014-04-22 Werner AlmesbergerBOOKSHELF (LTST-C190KRKT aka led): update URL (again !)
2014-04-22 Werner AlmesbergerINSTALL: change point 4 from editing Makefiles to chang...
2014-04-22 Werner AlmesbergerINSTALL: add anelok/ybox to list of repos we need
2014-03-28 Werner Almesbergerfw/usb/kinetis-dev.c (usb_end_device): disable the...
2014-03-28 Werner Almesbergerfw/: make clock.c track SIM_SOPT2_PLLFLLSEL_MASK
next